Abstract:Abstract Large birds have evolved an effective wing anatomy and mechanics, enabling airborne mastery of manoeuvres and endurance. For these very reasons, they are difficult to replicate and study. The aim of the present work is to achieve active wing articulations to mimic natural bird flapping towards efficient and agile Unmanned Aerial Vehicles (UAVs). The proposed design, bio-mimicking the black-headed gull, Larus ridibundus , has three active and independent servo-controlled wing joints at the shoulder, elbow and wrist to achieve complex controls. The construction of the wing is realised through a polymeric skin and carbon fibre–epoxy composite spars and ribs. The wing movements (flapping, span reduction and twisting) envelopes of the full-scale robotic gull (Robogull) are examined using the Digital Image Correlation (DIC) technique and laser displacement sensing. Its aerodynamic performance was evaluated in a wind tunnel at various flapping parameters, wind speeds and angles of attack. It is observed that a flapping amplitude of 45 $^\circ$ is more favourable than 90 $^\circ$ for generating higher lift and thrust, while also depending on the presence of span reduction, twist and wind speed. The model performs better at a flying velocity of 4m/s as compared with 8m/s. Both lift and thrust are high at a higher flapping frequency of 2.5Hz. Combined variation of the flapping frequency and stroke ratio should be considered for better aerodynamic performance. The combination of a lower stroke ratio of 0.5 with a flapping frequency of 2.5Hz generates higher lift and thrust than other combinations. Span reduction and wing twist notably and independently enhance lift and thrust, respectively. An increase in the angle-of-attack increases lift but decreases thrust. The model can also generate a significant rolling moment when set at a bank angle of 20 $^\circ$ and operated with independently controlled flapping amplitudes for the wings (45 $^\circ$ for the left wing and 90 $^\circ$ for the right wing). Based on the optimal values for the flapping amplitude (45 $^\circ$ ), flapping frequency (2.5Hz) and flying velocity (4m/s), the Strouhal number (St) of the Robogull model is 0.24, lying in the optimal range ( $0.2 < \mathrm{St} < 0.4$ ) for natural flyers and swimmers.

Biomimetic Airfoil Optimization to Supplement Flight Efficiency in Unmanned Aerial Vehicles

Towards Virtual Testing of Flapping Flight

Aerodynamic performance investigation on a morphing unmanned aerial vehicle with bio-inspired discrete wing structures

Influence of bioinspired morphing on the flow field characteristics of UAV wings at low Reynolds number

Research on Improvement Methods for Driven System of Bio-Inspired Aircraft to Increase Flight Speed

Bioinspired Morphing Wings: Mechanical Design and Wind Tunnel Experiments.

Realisation and testing of novel fully articulated bird-inspired flapping wings for efficient and agile UAVs

Efficiency Change of Control Surface of a Biomimetic Wing Morphing UAV

Trim Optimizations of an Adaptive Tailless Aircraft with Composite Wing

Pitch-axis supermanoeuvrability in a biomimetic morphing-wing UAV

A Multi-Objective Optimization Design Method for High-Aspect-Ratio Wing Structures Based on Mind Evolution Algorithm Backpropagation Surrogate Model

Enhancing Longitudinal Flight Performance of Drones Through the Coupling of Wings Morphing and Deflection of Aerodynamic Surfaces

Bird-inspired robotics principles as a framework for developing smart aerospace materials

Designing a Morphing Wing for Fixed-Wing UAVs By IJISRT

A review of bird-like flapping wing with high aspect ratio

Gull-inspired joint-driven wing morphing allows adaptive longitudinal flight control

A review of avian-inspired morphing for UAV flight control

Adaptive morphing of wing and tail for stable, resilient, and energy-efficient flight of avian-informed drones

The function of the alula on engineered wings: a detailed experimental investigation of a bioinspired leading-edge device

Wing Optimisation for a tractor propeller driven Micro Aerial Vehicle

The Progress of Aerodynamic Mechanisms Based on Avian Leading-Edge Alula and Future Study Recommendations