Abstract:Lithium Ion batteries (LIB) demand has shown an exciting increase lately, particularly looking for light-weight solution for portable devices [1], [2]. Recently, The development and implementation of electrode material production techniques pushed the LIB's current state performance to further improvement. Silicon (Si) anode-based electrodes are considered an attractvie alternative to conventional graphite electrodes due to their high specific capacity [3]. Theoretically, Si could alloy with Li up to Li 4.4 Si and result in a specific capacity of 4200 mAh/g, where the mechanical stress within the electrode material causes loss in the conductivity and breaking of the cell. To overcome this issue, different methodologies have been tested for further improvement of Si implementation with different nanostructures [4]. On the other hand, the production rate of LIB is very important to meet the high demand for different technologies. and, a commercial Si grade is highly recommended along with the conventional tape-casting production method. Furthermore, water-based binders, such as Polyacrylic Acid and Carboxy methyl Cellulose (cellulose-based binders) plays an important role in electrode preparation, where it is supporting the volume expansion of Si and preserveing electrode morphology [5]. Herein, we focus on producing a high-quality Si electrode with cellulose binder, enhanced by conductive carbon allotrope additives. In this study, different Si grades will be tested with different concentrations along with conductive and binder [6]. Electrochemical characterization of the Si anode half cell , such as cycling, cyclic voltammetry, and Impedance spectroscopy vs Li + metal shows extended and stabilized cycling performance, inferring a reduced anode pulverization. References [1] M. Wakihara, ‘Recent developments in lithium ion batteries’, Mater. Sci. Eng. R Rep. , vol. 33, no. 4, pp. 109–134, Jun. 2001, doi: 10.1016/S0927-796X(01)00030-4. [2] B. Scrosati, ‘Recent advances in lithium ion battery materials’, Electrochimica Acta , vol. 45, no. 15, pp. 2461–2466, May 2000, doi: 10.1016/S0013-4686(00)00333-9. [3] S. Chae, M. Ko, K. Kim, K. Ahn, and J. Cho, ‘Confronting Issues of the Practical Implementation of Si Anode in High-Energy Lithium-Ion Batteries’, Joule , vol. 1, no. 1, pp. 47–60, Sep. 2017, doi: 10.1016/j.joule.2017.07.006. [4] J. Cho, ‘Porous Si anode materials for lithium rechargeable batteries’, J. Mater. Chem. , vol. 20, no. 20, pp. 4009–4014, May 2010, doi: 10.1039/B923002E. [5] P. Parikh et al. , ‘Role of Polyacrylic Acid (PAA) Binder on the Solid Electrolyte Interphase in Silicon Anodes’, Chem. Mater. , vol. 31, no. 7, pp. 2535–2544, Apr. 2019, doi: 10.1021/acs.chemmater.8b05020. [6] A. Meyer, F. Ball, and W. Pfleging, ‘The Effect of Silicon Grade and Electrode Architecture on the Performance of Advanced Anodes for Next Generation Lithium-Ion Cells’, Nanomaterials , vol. 11, no. 12, Art. no. 12, Dec. 2021, doi: 10.3390/nano11123448.

Investigating of Carbon Agent Distribution Using Long-Chain Alkyl in Grafted Binder for High-Capacity SiOx/Graphite Anode

A Robust Network Binder Via Localized Linking by Small Molecules for High-Areal-capacity Silicon Anodes in Lithium-Ion Batteries

Epoxy and Amide Crosslinked Polarity Enhanced Polysaccharides Binder for Silicon Anode in Lithium-Ion Batteries

Improving the Performance of the SiO/C Anode by Employing theTriblock Copolymer Binder and Copper Nanowires

Modified Polyacrylonitrile Cross-Linked with Carboxymethyl Cellulose Constructing a Hydrogen Bonding Network for High-Performance Silicon Anodes

Inorganic/organic Composite Binder with Self-Healing Property for Silicon Anode in Lithium-Ion Battery

Building an Elastic Mechanical Network for Highly Efficient Silicon‐Based Anodes

Enhancing performance of Si/C composite anode in high energy density lithium-ion batteries with CMC-CPAM-SBR binder

Ion-conductive and mechanically robust chitosan-based network binder for silicon/graphite anode

Improving Fundamental Understanding of Si-Based Anodes Using Carboxymethyl Cellulose (CMC) and Styrene-Butadiene Rubber (SBR) Binder for High Energy Lithium Ion Battery Applications

Novel alginate-based binders for silicon–graphite anodes in lithium-ion batteries: effect of binder chemistry on the electrochemical performance

In Situ Room-Temperature Cross-Linked Highly Branched Biopolymeric Binder Based on the Diels–Alder Reaction for High-Performance Silicon Anodes in Lithium-Ion Batteries

Understanding Electrochemical Properties for a Bio-Based Silicon Anode Electrode Enhanced with Carbon Nanostructure Conductive Additives and Water-Based Binders

A Robust Network Sodium Carboxymethyl Cellulose-Epichlorohydrin Binder for Silicon Anodes in Lithium-Ion Batteries

High-Performance Carboxymethyl Cellulose Integrating Polydopamine Binder for Silicon Microparticle Anodes in Lithium-Ion Batteries

Multiple Network Binders via Dual Cross-Linking for Silicon Anodes of Lithium-Ion Batteries

A Novel Gelatin Binder with Helical Crosslinked Network for High-Performance Si Anodes in Lithium-Ion Batteries

Interface‐Adaptive Binder Enabled by Supramolecular Interactions for High‐Capacity Si/C Composite Anodes in Lithium‐Ion Batteries

Preparation of an Amorphous Cross-Linked Binder for Silicon Anodes

Biomass-derived fluorinated corn starch emulsion as binder for silicon and silicon oxide based anodes in lithium-ion batteries

Influence of different Alginate and CMC binders on moisture content, electrode structure and electrochemical properties of graphite based anodes for lithium‐ion batteries