Abstract:Lithium-ion batteries (LIBs) are key solutions to clean energy. Their high energy densities have led to the dominance of LIBs in mobile devices and electric vehicles. However, traditional electrolyte limits their operation at high voltage and extreme environmental temperatures. Here, we designed a new multifunctional electrolyte, in which lithium bis(fluorosulfonyl)imide (LiFSI) is used as salt and fluorinated diethyl carbonate (DFDEC) is used as the major solvent. With this optimized electrolyte, the graphite||LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) full cells are capable of fast-charging and can deliver long-term cycling with a cutoff voltage as high as 4.5V. Specifically, the battery shows the capacity retention of 84.3% after 500 cycles with an average coulombic efficiency (CE) as high as 99.93%. Synchrotron-based characterization suggests the formation of anion derived, LiF-rich interphases on the surfaces of both graphite anode and NMC811 cathode. Thanks to the fast ion transport and stable interphase, the cell in the optimized electrolyte demonstrates stable cycling behavior within a wide operating temperature. At high temperature (60 oC), the full cell delivers 88.8% of its initial capacity after 130 cycles at a high current density of 1C. At low temperature (-20 oC), the optimized electrolyte enables a capacity retention of 90.9% after 100 cycles when charging and discharging at 0.2C. Acknowledgment: The work done at Brookhaven National Laboratory was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Vehicle Technology Office of the U.S. DOE through Applied Battery Research for Transportation (ABRT) program under contract no. DE-SC0012704. The electrodes used in this study were produced at the U.S. Department of Energy’s (DOE) CAMP (Cell Analysis, Modeling and Prototyping) Facility, Argonne National Laboratory. The CAMP Facility is fully supported by the DOE Vehicle Technologies Office (VTO). This research used beamline 7-ID-2 (SST-2) of the National Synchrotron Light Source II, U.S. DOE Office of Science User Facilities, operated for the DOE Office of Science by Brookhaven National Laboratory under contract number DE-SC0012704. SEM measurements for this manuscript were performed at Center for Functional Nanomaterials, a U.S. DOE office of Science User Facility, at Brookhaven National Laboratory under the contract number DE-SC0012704.

Non-Combustible Electrolyte for Fast Charging Lithium-Ion Batteries

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

Enhanced Safety, High-Rate and High-Voltage Performance of a Lithium-Ion Battery Using Nonflammable Liquid Electrolyte

Highly safe lithium vanadium oxide anode for fast-charging dendrite-free lithium-ion batteries

Unlocking fast‐charging capabilities of lithium‐ion batteries through liquid electrolyte engineering

Fast‐charging of lithium‐ion batteries: A review of electrolyte design aspects

Designing Electrolytes With Controlled Solvation Structure for Fast‐Charging Lithium‐Ion Batteries

Solid Electrolyte Interphase Stabilization via Trace-Level Additives for Ultrafast Charging of Lithium Metal Battery

Nonflammable Electrolytes for Lithium Ion Batteries Enabled by Ultraconformal Passivation Interphases

Research progress on electrolytes for fast-charging lithium-ion batteries

Non‐Flammable Electrolyte Enables High‐Voltage and Wide‐Temperature Lithium‐Ion Batteries with Fast Charging

Locally Superconcentrated Electrolytes for Ultra-Fast-Charging Lithium Metal Batteries with High-Voltage Cathodes

Recent Achievements on the Liquid Electrolytes for Fast‐charging Lithium Metal Batteries

Non-destructive Fast Charging Algorithm of Lithium-Ion Batteries Based on the Control-Oriented Electrochemical Model

Fast-charging anodes for lithium ion batteries: progress and challenges

Ultrafast Charging of a 4.8 V Manganese‐Rich Cathode‐Based Lithium Metal Cell by Constructing Robust Solid Electrolyte Interphases

Fluorinated and sulfurized solid-electrolyte interface enabling durable and fast-charging graphite/LiFePO4 pouch batteries

Solvent-Assisted Hopping Mechanism Enables Ultrafast Charging of Lithium-Ion Batteries

Fast charging of energy-dense lithium-ion batteries

(Invited) Fluorinated Linear Carbonate Electrolyte for Lithium-Ion Batteries with Fast-Charging, High Voltage, and Wide Operating Temperatures

Advancing Lithium-Ion Battery Anodes Towards a Sustainable Future: Approaches to Achieve High Specific Capacity, Rapid Charging, and Improved Safety