Abstract:Hydropower has been the leading renewable source and cheapest ways to generate electrical energy in the world. In recent years, there has been a major upsurge in the hydropower development because of the use of pump as turbine (PAT). However, the operational reliability of a PAT is greatly affected by the unsteady flow fields; therefore, it is important to examine the unsteady flow behavior which can be used as a reference to reduce the noise, vibration, and cavitation performance for centrifugal pumps working as turbines. Thus, the objective of this study was to evaluate the unsteady flow fields by analyzing the distribution of the pressure pulsations using both numerical and experimental measurements in a PAT operating in pump mode. Firstly, the three‐dimensional (3D) unsteady flow equations were solved using SST <i>k‐</i>ω turbulence model during the numerical calculations. Secondly, the numerical results of the hydraulic pump performance were validated by the experimental measurements for numerical accuracy. Lastly, pressure transducers are positioned at certain monitoring points to measure the pressure in the PAT investigated. The numerical and experimental results show that the main frequency of the pressure pulsation is equal to the blade frequency, and as it deviates from the design operating condition, the magnitude of pressure pulsation intensifies. Furthermore, the impeller eye marked the lowest pressure coefficients especially at the design condition and makes it highly susceptible to cavitation. High pressure coefficients were obviously seen at the pressure side on the blade surface closer to the trailing edge at all studied operating conditions. Meanwhile, the rotor‐stator interaction generated the highest pressure pulsation distribution at the volute tongue. Thus, modification of the volute tongue is an optimal approach of reducing the pressure pulsation intensity in the volute and pump as a whole.

Effect of blade profile on the hydraulic performance of a double-suction centrifugal pump as turbine based on enstrophy dissipation theory

Effect of blade curve shape on the hydraulic performance and pressure pulsation of a pump as turbine

CFD Simulation and PIV Measurement of the Flow Field Generated by Modified Pitched Blade Turbine Impellers

Experimental and numerical investigations on pressure pulsation in a pump mode operation of a pump as turbine

Performance and unsteady flow characteristic of forward-curved impeller with different blade inlet swept angles in a pump as turbine

Study on the Impact of Blades Wrap Angle on the Performance of Pumps As Turbines Used in Water Supply System of High-Rise Buildings

Energy loss analysis of a double-suction centrifugal pump using in pump mode and turbine mode

Numerical investigation of splitter blades on the performance of a forward-curved impeller used in a pump as turbine

Experimental study of centrifugal pump as turbine with S-blade impeller

Study on energy conversion characteristics and pressure fluctuation interference characteristics between two stage impellers of the pump as turbine

Numerical and Experimental Investigations on Inflow Loss in the Energy Recovery Turbines with Back-Curved and Front-Curved Impeller Based on the Entropy Generation Theory

A Numerical Analysis of the Effect of Impeller Rounding on Centrifugal Pump as Turbine

Unsteady flow characteristics of energy conversion in impeller of centrifugal pump as turbine

Application of enstrophy dissipation to analyze energy loss in a centrifugal pump as turbine

The role of bionic tubercle leading-edge in a centrifugal pump as turbines(PATs)

Geometrical Optimization of Pump-As-Turbine (PAT) Impellers for Enhancing Energy Efficiency with 1-D Theory

Energy performance evaluation of an axial-flow pump as turbine under conventional and reverse operating modes based on an energy loss intensity model

Hydraulic Optimization and Loss Analyses of a Low Specific-Speed Centrifugal Pump with Variable-Thickness Blades

Theoretical, experimental, and numerical methods to predict the best efficiency point of centrifugal pump as turbine

Numerical Investigation of Flow Field and Energy Loss in a Centrifugal Pump as Turbine

Performance Prediction and Geometry Optimization for Application of Pump as Turbine: A Review