Abstract:Guided waves (GW) allow fast inspection of a large area and hence have received great interest from the structural health monitoring (SHM) community. Fiber Bragg grating (FBG) sensors offer several advantages but their use has been limited for the GW sensing due to its limited sensitivity. FBG sensors in the edge-filtering configuration have overcome this issue with sensitivity and there is a renewed interest in their use. Unfortunately, the FBG sensors and the equipment needed for interrogation is quite expensive, and hence their number is restricted. In the previous work by the authors, the number and location of the actuators was optimized for developing a SHM system with a single sensor and multiple actuators. But through the use of the phenomenon of acoustic coupling, multiple locations on the structure may be interrogated with a single FBG sensor. As a result, a sensor network with multiple sensing locations and a few actuators is feasible and cost effective. This paper develops a two-step methodology for the optimization of an actuator–sensor network harnessing the acoustic coupling ability of FBG sensors. In the first stage, the actuator–sensor network is optimized based on the application demands (coverage with at least three actuator–sensor pairs) and the cost of the instrumentation. In the second stage, an acoustic coupler network is designed to ensure high-fidelity measurements with minimal interference from other bond locations (overlap of measurements) as well as interference from features in the acoustically coupled circuit (fiber end, coupler, etc.). The non-sorting genetic algorithm (NSGA-II) is implemented for finding the optimal solution for both problems. The analytical implementation of the cost function is validated experimentally. The results show that the optimization does indeed have the potential to improve the quality of SHM while reducing the instrumentation costs significantly.

Modeling of Fiber Optic Acoustic Coupler for Ultrasonic Sensing

Coherent OTDR Based Ultra-High Sensitive Acoustic Sensor Assisted with Distributed Microstructured Optical Fiber(DMOF) and Hollow Cylinder Transducer

Research of a Reflective Fiber-Optic Displacement Sensor with Intensity Compensation

Interaction Model for A Hi-Bi Fiber Optic Ultrasonic Sensor and the Host Material

Modeling of the Influence of Coupling in Optical Microfiber Resonators

Modeling of ultrasound generation by a polymer composite based fiber-optic photoacoustic transducer

State-of-the-Art Optical Microfiber Coupler Sensors for Physical and Biochemical Sensing Applications

Modeling of fiber-optic vibration sensor based on attached bragg grating

Optimal Design of a Sensor Network for Guided Wave-Based Structural Health Monitoring Using Acoustically Coupled Optical Fibers

Advanced suspended-core fiber sensor for seismic physical modeling

Modeling And Implementation Of A Fiber-Based Quartz-Enhanced Photoacoustic Spectroscopy System

Analysis and Optimization of Acoustic Sensor Based on Fiber Fabry-Pérot Etalon

A Comprehensive Study of Optical Fiber Acoustic Sensing

Modeling and analysis of vibration characteristics of all fiber current sensor

Ultrasonic optical fiber sensing for composite structural health monitoring

Analysis of a tunable single mode optical fiber coupler

Shear Lag Model for Embedded Interferometric Optical Fiber Sensors

A Broadband Optical Fiber Coupler Based on Dual-Hollow Core Fiber

Design Optimization of Sensitivity-Enhanced Structure for Fiber Bragg Grating Acoustic Emission Sensor Based on Additive Manufacturing

Interaction Model Between Fiber Optic Ultrasonic Sensor and Matrix Materials

Design of a Novel Fiber Grating Acoustic Emission Sensor based on Coupling Cone Structure