Abstract:Due to its simple structure and lack of moving parts, the supersonic air ejector has been widely applied in the fields of machinery, aerospace, and energy-saving. The performance of the ejector is influenced by the flow channel structure and the velocity of the jet, thus the confined jet is an important limiting factor for the performance of the supersonic air ejector. In order to investigate the effect of the confined jet on the performance of the ejector, an air ejector with a rectangular section was designed. The effects of the section width (W-c) on the entrainment ratio, velocity distribution, turbulent kinetic energy distribution, Mach number distribution, and vorticity distribution of the rectangular section air ejector were studied numerically. The numerical results indicated that the entrainment ratio of the rectangular section air ejector increased from 0.34 to 0.65 and the increment of the ER was 91.2% when the section width increased from 1 mm to 10 mm. As W-c increased, the region of the turbulent kinetic energy gradually expanded. The energy exchange between the primary fluid and the secondary fluid was mainly in the form of turbulent diffusion in the mixing chamber. In addition to W-c limiting the fluid flow in the rectangular section air ejector, the structure size of the rectangular section air ejector in the XOY plane also had a limiting effect on the internal fluid flow. In the rectangular section air ejector, the streamwise vortices played an important role in the mixing process. The increase of W-c would increase the distribution of the streamwise vortices in the constant-area section. Meanwhile, the distribution of the spanwise vortices would gradually decrease.

Experimental study of the influence of nozzle and mixing chamber dimensions on the performance of the ejector

An Investigation on the Component Efficiencies of a Small Two-Phase Ejector

Experimental investigation on two-phase driven ejector performance in a novel ejector enhanced refrigeration system

Numerical Investigation on the Effect of Section Width on the Performance of Air Ejector with Rectangular Section

Effect of Mixing Chamber Diameter on Performance of Transcritical CO2 Heat Pump System with Ejector

Experimental and numerical studies on the performance of supersonic multi-nozzle ejector

Numerical Investigation of Geometry Parameters for Design of High Performance Ejectors

Experimental Investigation of an Adjustable Ejector for Co2 Heat Pump Water Heaters

Numerical investigation of the effect of primary nozzle geometries on flow structure and ejector performance for optimal design

Experimental and Numerical Analysis of Supersonic Air Ejector

Experimental Investigation of the Performance of a Novel Ejector–Diffuser System with Different Supersonic Nozzle Arrays

Numerical Investigation on the Performance of Different Primary Nozzle Structures in the Supersonic Ejector

Experimental and numerical investigation of the effect of shock wave characteristics on the ejector performance

Investigation on the Influence of Geometric Parameters on Two-Phase Ejector Performance with R290

Experimental and Numerical Analysis on the Internal Flow of Supersonic Ejector Under Different Working Modes

Analysis on the Optimal Mixing Pressure and Efficiency Limit of an Ideal Ejector

Numerical Simulation Study on the Influence of Primary Nozzle Deviation on the Steam Ejector Performance

A Parametric Study on the Effect of Mixing Chamber for Expansion Work Recovery CO2 Ejector

Numerical Study on the Structural Optimization of R290 Two-Phase Ejector with a Non-Equilibrium CFD Model

A theoretical model for performance evaluation of a novel configuration of supersonic ejectors

Experimental Investigation of the Performance and Spray Characteristics of a Supersonic Two-Phase Flow Ejector with Different Structures