Abstract:Optimization of three-dimensional (3D) print conditions for material extrusion of plastics by fused filament fabrication typically involves trade-offs between mechanical properties and dimensional accuracy due to their orthogonal requirements. Increased polymer mobility improves the mechanical properties by chain diffusion to strengthen the interfaces between printed roads, but flow associated with the high polymer mobility leads to inaccuracies. Here, we describe the application of a model core–shell geometry in filaments to address these trade-offs and understand the material requirements to achieve improved dimensional accuracy. Systematic variation of the core with commercial polycarbonate-based plastics and a common high-density polyethylene (HDPE) shell illustrates that tensile properties obtained with these filaments are relatively insensitive to printing conditions and selection of the core polymer, but the dimensional accuracy of the printed part improves markedly as the glass transition temperature of the core polymer increases. The impact resistance of the core–shell-based parts is dependent on the selection of the core polymer with a significant decrease in impact resistance for the lowest modulus core examined. Although warping can be mostly mitigated with the core–shell filaments, the printed object is generally smaller than the digital source due to large volume change associated with HDPE crystallization. The dimensional accuracy is dependent on the solidification temperature and mechanical properties of the polymers comprising the filament, print conditions, and the local geometry of the object as quantified by layer-by-layer analysis of 3D scanned images of the printed objects. Both processing changes and some structures in the digital object that can degrade the dimensional accuracy are identified through this analysis. The core–shell filament structure represents a model geometry to understand the potential for the printing of polymer blends where separation of solidification temperatures in cocontinuous blends could provide a route to improve performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsapm.1c00110?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsapm.1c00110</a>.Additional experimental protocols, filament cross-sections, DSC thermograms, images and characterization of printed impact bars, local deviations in dimensions between print and digital source, raw impact data, void fraction analysis, and tensile stress–strain curves (<a class="ext-link" href="/doi/suppl/10.1021/acsapm.1c00110/suppl_file/ap1c00110_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

The effect of heating temperature on 3D print filament diameter consistency produced by HDPE and LDPE plastic extrusion machine

The effect of nozzle hole diameter of 3D printing on porosity and tensile strength parts using polylactic acid material

Effect of Printing Parameters on the Thermal and Mechanical Properties of 3D-Printed PLA and PETG, Using Fused Deposition Modeling

Influence of Ambient Temperature and Crystalline Structure on Fracture Toughness and Production of Thermoplastic by Enclosure FDM 3D Printer

Enhanced Dimensional Accuracy of Material Extrusion 3D-Printed Plastics through Filament Architecture

Effects of Printing Temperature and Filling Percentage on the Mechanical Behavior of Fused Deposition Molding Technology Components for 3D Printing

Effects of heat treatment on the mechanical properties of 3D-printed polylactic acid: Study of competition between crystallization and interlayer bonding

Effects of Steam Heat and Dry Heat Sterilization Processes on 3D Printed Commercial Polymers Printed by Fused Deposition Modeling

Effect of Extrusion Temperature on the Physico-Mechanical Properties of Unidirectional Wood Fiber-Reinforced Polylactic Acid Composite (WFRPC) Components Using Fused Deposition Modeling

Exit morphology and mechanical property of FDM printed PLA: influence of hot melt extrusion process

Effects of Nozzle Temperature on Mechanical Properties of Polylactic Acid Specimens Fabricated by Fused Deposition Modeling

Pengaruh Parameter Proses 3D Printing Terhadap Kuat Bentur Menggunakan Fiamen Polycarbonate

Simulation of temperature profile in fused filament fabrication 3D printing method

Material Characterizations of the Polymers Reinforced with Recycled Flexible Plastic Blends as Filament for 3D Printing

Effect of Temperature History During Additive Manufacturing on Crystalline Morphology of Polyether Ether Ketone

Mechanical Performance of 3D-Printed Polyethylene Fibers and Their Durability Against Degradation.

Peningkatan Kuat bentur Produk 3D Printing Fused Deposition Modeling menggunakan Filamen Polypropylene

Improving the Impact Strength and Heat Resistance of 3D Printed Models: Structure, Property, and Processing Correlationships during Fused Deposition Modeling (FDM) of Poly(Lactic Acid)

Effect of annealing treatment and infill percentage on 3D-printed PEEK samples by Fused Filament Fabrication

Numerical Investigation of Deposition Characteristics of PLA on an ABS Plate Using a Material Extrusion Process

Fused Deposition Modelling (FDM) of Thermoplastic-Based Filaments: Process and Rheological Properties-An Overview