Abstract:Titanium alloys are notoriously difficult to machine. They are used in the manufacture of various types of lightweight components. It is therefore important to improve their machinability and thus achieve sustainability in machining such alloys, by selecting appropriate influential factors: cutting parameters, tool material, geometric form, coolant types, and hybrid machining methods, to deliver efficient output. Nowadays, meta-heuristic algorithms effectively solve multi-objective optimization in machining problems instead of single-objective one. Along with that, the mathematical predictive models used for single-objective optimization are gradually being replaced by machine learning algorithms, which are highly robust and efficient in terms of prediction performance. Therefore, this work addresses the prediction and optimization of average surface roughness (Ra) and tool wear (VB) in Ti 6 Al 4 V alloy turning, using a WC tool coated by chemical vapor deposition (CVD) and physical vapor deposition (PVD), with dry machining. We apply a two-pronged approach combining machine learning (ML) and Non-Dominated Sorting Genetic Algorithm (NSGA-II), to model and optimize Ra and VB. The four ML models – Linear Regression (LIN), Support Vector Machine Regression (SVR), Extreme Gradient Boosting (XGB), and Artificial Neural Network (ANN) – are used to predict Ra and VB. The input variables of the turning process – feed rate, depth of cut, cutting speed, cutting time, and tool materials – are the major factors affecting surface quality and tool wear. By the error metrics such as root mean squared error (RMSE), mean absolute error (MAE), and coefficient of determination (R 2 ), ANN is found to offer the best predictive performance. An ML and NSGA-II-based approach is then employed for multi-objective optimization of cutting parameters in Ti 6 Al 4 V turning. Fifty Pareto solutions are identified in the range of Ra and VB between (1.332 and 1.441 μm) and (0.100 and 0.125 mm), respectively. In this work, the Pareto solutions are selected based on their ranked performances. This aligns with the decision criterion employed to select the most robust cutting parameters. The definitive optimal Ra and VB are obtained by formulating a robust decisive multi-criterion function which integrates performance, preferred decision criterion, and trustworthiness. Finally, this produces the optimal solution for Ra and VB − 1.439 μm and 0.100 mm, respectively. Experimental validation confirms that the final optimum solution is within the acceptable range.

Estimation of surface quality for turning operations using machine learning approach

Surface quality prediction by machine learning methods and process parameter optimization in ultra-precision machining of AISI D2 using CBN tool

Prediction of Surface Roughness Using Machine Learning Approach in MQL Turning of AISI 304 Steel by Varying Nanoparticle Size in the Cutting Fluid

Optimization of Machining Parameters in Mild Steel Turning Operation by Response Surface Methodology

Multi-objective optimization based on machine learning and non-dominated sorting genetic algorithm for surface roughness and tool wear in Ti6Al4V turning

Experimental Optimization of High-precision Turning Parameters of AL6061 Materials for Automotive Industry Based on Grey Relational Analysis

Modelling and Optimization of Machining parameters for Turning Automotive Shafts using RSM and Grey Relational Analysis

Evaluation of machinability performance of T51603 using response surface methodology and grey relational analysis

Understanding Machining Process Parameters and Optimization of High-Speed Turning of NiTi SMA Using Response Surface Method (RSM) and Genetic Algorithm (GA)

Optimization of machining parameters while turning AISI316 stainless steel using response surface methodology

Optimization of Surface Quality and Power Consumption in Machining Hardened AISI 4340 Steel

Optimization of ultra-precision CBN turning of AISI D2 using hybrid GA-RSM and Taguchi-GRA statistic tools

A novel approach for prediction of surface roughness in turning of EN353 steel by RVR-PSO using selected features of VMD along with cutting parameters

Machine learning based modelling and optimization in hard turning of AISI D6 steel with newly developed AlTiSiN coated carbide tool

Modeling of Cutting Parameters and Tool Geometry for Multi-Criteria Optimization of Surface Roughness and Vibration via Response Surface Methodology in Turning of AISI 5140 Steel

Roughness prediction using machine learning models in hard turning: an approach to avoid rework and scrap

Process parameters optimization by bat inspired algorithm of CNC turning on EN8 steel for prediction of surface roughness

Estimation of machining responses in hard turning under dry and HPC conditions using different AI based and statistical techniques

A Comprehensive Analysis of Surface Roughness, Vibration, and Acoustic Emissions Based on Machine Learning during Hard Turning of AISI 4140 Steel

Optimization of CNC End Milling Process Parameters of Low-Carbon Mold Steel Using Response Surface Methodology and Grey Relational Analysis

A new intelligent approach of surface roughness measurement in sustainable machining of AM-316L stainless steel with deep learning models