Abstract:Ti3C2Tx MXene has drawn remarkable attention in electronic sensors. Existing MXene-based pressure sensors generally have a narrow linear sensing range, which limits their wide application. Moreover, previous studies on MXene-based pressure sensors were mainly focused on increasing sensitivity via various microengineering techniques, but little attention has been paid to environmental stability and biocompatibility of these sensors. Herein, a highly flexible, biocompatible, and environmentally stable Ti3C2Tx MXene/bamboo cellulose fiber (BCF)/poly(dimethylsiloxane) (PDMS) composite pressure sensor with an ultrawide working range (up to 2 MPa), a high linearity (R2 = 0.966), and long-term stability is demonstrated. First, the MXene/BCF (MB) foam with well-optimized porosity and connectivity was prepared through an efficient freeze-drying method. Then, the MB-based piezoresistive composite (PMB) was obtained by directly embedding the MB foams into PDMS elastomers. In striking contrast to previous MXene composite-based pressure sensors, the PMB pressure sensor exhibits not only excellent pressure sensing performance and good biocompatibility but also prominent work reliability to resist temperature fluctuation, moisture/water, and UV irradiation. Furthermore, to demonstrate the potential of the PMB pressure sensor, various human movements under both ambient and harsh environmental conditions were monitored. Finally, the PMB pressure sensor was also successfully integrated with soft robotic hands to show its great potential in robotic tactile sensation.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c07994.SEM image of Ti3AlC2 particles (Figure S1); SEM images of the MB foams with 20, 40, and 50 wt % MXene nanosheets (Figure S2); typical compressive stress–strain curves of the MB foam, neat PDMS, and the PMB composite; compressive stress–strain curves of the PMB composite under varied applied strains from 5 to 80%, cyclic compressive stress–strain curves of the PMB composite during 1000 loading–unloading cycles with the peak strain of 15%; electrical resistivity of MB and PMB foam with 30 wt % MXene sheets (Figure S3); schematic illustration of the piezoresistive mechanism of the PMB sensor and cyclic RCR response with various pressure levels from 10 to 2000 kPa (Figure S4); contact angles of MB foam, PDMS, and PMB (Figure S5); RCR responses of the sensor for detecting knee flexion, elbow flexion, blowing, and bulging movements (Figure S6); and comparison of the PMB pressure sensor with the pressure sensors reported in the literature (Table S1) (PDF)This article has not yet been cited by other publications.

Hierarchical Porous Biowaste‐Based Dual Humidity/Pressure Sensor for Robotic Tactile Sensing, Sustainable Health, and Environmental Monitoring

A Soft Piezoresistive Pressure Sensor Based on Porous Conductive CB/PDMS Composite

Crosstalk-free Hybrid Integrated Multimodal Sensor for Human Temperature, Humidity, and Pressure Monitoring

Eco-Friendly, High-Performance Humidity Sensor Using Purple Sweet-Potato Peel for Multipurpose Applications

A Highly Sensitive, Breathable, and Biocompatible Wearable Sensor Based on Nanofiber Membrane for Pressure and Humidity Monitoring

Hierarchically structured porous natural dielectric layer for sustainable pressure sensing, gesture monitoring, and detecting spatial pressure distribution

All‐Paper‐Based, Flexible, and Bio‐Degradable Pressure Sensor with High Moisture Tolerance and Breathability Through Conformally Surface Coating

Highly Stretchable Electronic‐Skin Sensors with Porous Microstructure for Efficient Multimodal Sensing with Wearable Comfort

A Pressure and Temperature Dual-Parameter Sensor Based on a Composite Material for Electronic Wearable Devices

Eco-Friendly Textile-Based Wearable Humidity Sensor with Multinode Wireless Connectivity for Healthcare Applications

Highly Sensitive Flexible Piezoresistive Pressure Sensor Developed Using Biomimetically Textured Porous Materials.

A new approach for an ultrasensitive tactile sensor covering an ultrawide pressure range based on the hierarchical pressure-peak effect

Printable, Flexible, Breathable and Sweatproof Bifunctional Sensors Based on an All-Nanofiber Platform for Fully Decoupled Pressure–temperature Sensing Application

Biodegradable pressure sensors with high sensitivity and wide detection range via a piezoresistive/capacitive dual response

Self-Powered Resilient Porous Sensors with Thermoelectric Poly(3,4-ethylenedioxythiophene):Poly(styrenesulfonate) and Carbon Nanotubes for Sensitive Temperature and Pressure Dual-Mode Sensing

Highly sensitive and wide-detection range pressure sensor constructed on a hierarchical-structured conductive fabric as a human-machine interface

A Dual‐Mode Wearable Sensor Based on Bacterial Cellulose Reinforced Hydrogels for Highly Sensitive Strain/Pressure Sensing

Ultra-Wide Range, High Sensitivity Piezoresistive Sensor Based on Triple Periodic Minimum Surface Construction

Ti 3 C 2 T x MXene/Bamboo Fiber/PDMS Pressure Sensor with Simultaneous Ultrawide Linear Sensing Range, Superb Environmental Stability, and Excellent Biocompatibility

Porous Polydimethylsiloxane Elastomer Hybrid with Zinc Oxide Nanowire for Wearable, Wide-Range, and Low Detection Limit Capacitive Pressure Sensor

A Hybrid Response Driven Hierarchical Porous Flexible Pressure Sensor