Mitigation of fouling problem and optimization of treatment effect in the polyvinylidene fluoride (PVDF) based electrochemical membrane bioreactor (EMBR)
Zhongyuan Mao,Hongju Liu,Bihui Niu,Waheed Ali Bhagat,Wenhong Fan,Dawei Liang,Linyan Yang,Qian Zhao,Shujuan Meng
DOI: https://doi.org/10.1016/j.seppur.2024.126340
IF: 8.6
2024-01-11
Separation and Purification Technology
Abstract:The hydrophobic polyvinylidene fluoride (PVDF) membrane is one of the most widely used membrane material in the treatment of domestic sewage, while it still endures the fouling problem. Many studies have focused on the fouling control, among which the electrochemical membrane bioreactor (EMBR) is promising because of its chemical-free nature, but the specific influence of applied electric field on the mitigation of membrane fouling and the treatment effect are unclear and need further exploration. In this work, the influence and interaction of operation parameters (operation voltage, electrode spacing, power-on mode, and hydraulic retention time) on fouling development and pollutants removals in a PVDF based EMBR were carefully explored for the optimal operating conditions. Results showed that the run time of EMBR system under optimal conditions was 23.4 % longer than that of the MBR system without a weak electric field, indicating that the membrane fouling problem was well alleviated. In addition, the effluent quality of EMBR was also improved than that treated by the MBR system. The removal rates of chemical oxygen demand, ammonia nitrogen, total phosphorus, and total nitrogen were increased by 2.25 %, 2.64 %, 9.02 %, and 12.1 %, respectively, revealing the improvement of this EMBR system in sewage treatment. This work shows that introduction of a weak electric field in MBR system not only effectively controls membrane fouling, but also increases the effluent quality, and thus endows EMBR as a candidate for sustainable and green technique in sewage treatment.
engineering, chemical