Abstract:Kim, S.; Park, J.S.; Boo, S.Y., and Park, J.-S., 2023. Development of floating tidal current energy systems to support energy independence in island areas. In: Lee, J.L.; Lee, H.; Min, B.I.; Chang, J.-I.; Cho, G.T.; Yoon, J.-S., and Lee, J. (eds.), Multidisciplinary Approaches to Coastal and Marine Management. Journal of Coastal Research, Special Issue No. 116, pp. 26-30. Charlotte (North Carolina), ISSN 0749-0208. Some of the optimum sites for the tidal current energy system in Korea are suggested to be in island regions with a deep-water depth. It is known that floating systems are more advantageous than fixed systems for a water depth of 20 m or deeper. In this study, a floating tidal current energy system development, thus, considered for sites deeper than 20 m such as Incheon, Gyeonggi, or Chungnam province. Floating systems with a total power rating of 100 kW were developed combining two 50 kW vertical axis turbines. The systems have a hybrid mooring configuration with catenary and taut mooring. Two different types of steel hull systems were sized and configured considering the turbine operating loads and sea states. The first one, the base platform is consisted of a circular pontoon barge, four cylinders, a damping plate, and turbine supporting structures. The other one, the pontoon platform is consisted of a circular pontoon barge and turbine supporting structures. Both platform displacements and weights are similar, but platform dimensions differ greatly. Platform motions and mooring line strength analysis were carried out for the site operating and extreme conditions. Results demonstrate that the design requirements are met so that the platform and mooring systems are technically feasible. The pontoon platform has shown somewhat better than the base platform in the performances of the motions, tensions, and costs. A single unit, excluding turbine cost, is estimated to be around $4.7 to $5.0 million depending upon the platform configurations and anchor options. Due to the slight cost difference, further analysis is recommended in the next phase, to identify the most viable option. Results suggest that drilled and grouted anchors may be a more cost-effective solution. However, further seabed study will be required to confirm an optimum anchor type.

Estimation of Underwater Workable Time Considering Tidal Currents: A Review of Diving Equipment

Exploring Subsea Dynamics: A Comprehensive Review of Underwater Pipelines and Cables

A Current Meter Used for the Estimation of Water Flow Rate in the Upwelling Pipe

Numerical Analysis Impact of Ship Building & Repairing on Surrounding Waters

A Kinematic Approach for Rip Current Identification from ADCP Observation Data at Haeundae Beach, Korea

Prediction of Pier Scour Depth under Extreme Typhoon Storm Tide

High-resolution 3D Hydrodynamic Modeling and Comprehensive Assessment of Tidal Current Energy Resources

Bathymetric Survey for Seabed Topography using Multibeam Echo Sounder in Wando, Korea

CFD-based calculation of hydrodynamic resistance coefficient for divers with equipment

Development of Floating Tidal Current Energy Systems to Support Energy Independence in Island Areas

Effects of tidal variation characteristics on analysis results in coastal pumping test

Improving a ship's energy efficiency in Korean coastal waters using tidal current information

Improved empirical formulation for seabed trench and its influence on fatigue performance of steel catenary risers under directional waves and currents

Measurement of backscattering strength of artificial bubbles in the Southern Sea of the Korean Peninsula

Safety criteria on water depth, offshore distance and dredging volume in marine sand mining operation in Kyunggi Bay, Korea

Hydrodynamic simulation of coastal reservoir in response to flow control: a numerical study of the Saemangeum reservoir

Numerical model assessment of tidal stream energy resources in the Severn Estuary, UK

Numerical investigation of depth-varying currents on ship hydrodynamics in confined water

Development of Continuous Monitoring System for Seawater Discharging

Estimating Waves and Currents at the Saltmarsh Edge Using Acoustic Doppler Velocimeter Data

CFD and machine learning approach based-predictive modeling of scouring below submarine pipeline under wave and current condition