Abstract:Abstract. The mining system has the potential for mining water problems that have an impact on the entry of water into the mine openings, thus affecting working conditions with a decrease in rock strength resulting in instability. The mining water problem occurred at PT PPA Site Job PT MLP disposal area and pit. This research was conducted to determine the value of the actual rock strength (strength material), runoff water management in the form of determining the dimensions of the drains, sump dimensions, the number and specifications of the pump to be used, and the value of the safety factor (FK) on the slopes. The research method used is the geotechnical analysis of slope stability with the Finite Element Method and the Limit Equilibrium Method and is simulated with Phase2 and Slide software. The study was conducted in the disposal area divided into 5 sections (A-E). The input material parameters used are the internal shear angle (Ø), cohesion (c) and the density of the embankment material (ɤ) which are obtained based on the results of testing the physical and mechanical properties of the bulk and core samples. Runoff water management is carried out by hydrological analysis using the Gumbel distribution method and the Mononobe equation, while the planning of the dimensions of the water channel uses the Manning formula and the sump dimension by trial and error based on the amount of water discharge entering the pit. The test results show the lowest cohesion (c) value is 0.22 kg/m2 and the lowest internal shear angle (Ø) is 15.30o. Hydrological analysis for recommendations for the dimensions of waterways in the management of runoff water outside the pit, namely the width of the base (B) 0.4 meters; optimal water height (h) 0.21 meters; channel height (H) 0.45 meters and top length (L) 0.90 meters. The dimensions of the sump in the management of runoff and groundwater in the pit are 26 meters long, 19 meters wide and 6 meters high with a volume capacity of 2,964 m3, and the pump used is Multiflo® RF-420EXHV which has specifications with a maximum rotation speed of 1700 rpm, head 250 meters and pumping capability of 450 l/s. Geotechnical analysis in the disposal area shows that section A of the slopes (a) and E and in the area of the pit section Y there is no need for slope geometry recommendations based on KEPMEN 1827K/MEM/30/2018 with a safety factor value (FK) 1,3. Abstrak. Sistem penambangan memiliki potensi permasalahan air tambang yang berdampak dengan masuknya air kedalam bukaan tambang sehingga mempengaruhi kondisi kerja dengan penurunan kekuatan batuan yang mengakibatkan ketidakstabilan. Permasalahan air tambang tersebut terjadi pada PT PPA Site Job PT MLP area disposal dan pit. Penelitian ini dilakukan untuk mengetahui nilai kekuatan batuan (strength material), pengelolaan air limpasan berupa penentuan dimensi saluran air, dimensi sump, jumlah dan spesifikasi pompa yang akan digunakan, serta nilai faktor keamanan (FK) pada lereng. Metode penelitian yang digunakan adalah analisis geoteknik kestabilan lereng dengan metode elemen hingga (Finite Element Method) dan metode kesetimbangan batas (Limit Equilibrium Method) serta disimulasikan dengan software Phase2 dan Slide. Penelitian dilakukan pada area disposal yang dibagi menjadi 5 section (A-E). Input parameter material yang digunakan adalah sudut geser dalam (Ø), kohesi (c) dan berat jenis material timbunan (ɤ) yang diperoleh berdasarkan hasil pengujian sifat fisik dan sifat mekanik pada bulk dan core sample. Pengelolaan air limpasan dilakukan dengan analisis hidrologi menggunakan metode Distribusi Gumbel dan persamaan Mononobe, sedangkan perencanaan dimensi saluran air menggunakan rumus Manning dan dimensi sump dengan trial and error berdasarkan jumlah debit air yang masuk ke dalam pit. Hasil pengujian menunjukkan nilai kohesi (c) terendah sebesar 0,22 kg/m2 dan nilai sudut geser dalam (Ø) terendah sebesar 15,30o. Analisis hidrologi untuk rekomendasi dimensi saluran air dalam pengelolaan air limpasan di luar pit yaitu lebar dasar (B) 0,4 meter; tinggi air optimal (h) 0,21 meter; tinggi saluran (H) 0,45 meter dan panjang atas (L) 0,90 meter. Dimensi sump dalam pengelolaan air limpasan dan air tanah di dalam pit yaitu panjang 26 meter, lebar 19 meter dan tinggi 6 meter dengan kapasitas volume 2.964 m3, serta pompa yang digunakan adalah Multiflo® RF-420EXHV memiliki spesifikasi dengan kecepatan putaran maksimal 1700 rpm, head 250 meter dan kemampuan pemompaan 450 l/s. Analisis geoteknik pada area disposal menunjukkan section A lereng (a) dan E serta pada area pit section Y tidak diperlukannya rekomendasi geometri lereng berdasarkan KEPMEN 1827K/MEM/30/2018 dengan nilai faktor keamanan (FK) ≥ 1,3.

Analysis Use of PERT/CPM: Optimizing Manufacturing Production Process Resources for Building Construction Projects on Kunjang River Region, East Kalimantan

Optimalisasi Penjadwalan Proyek Pembangunan Gedung Puskesmas Badas Menggunakan Critical Path Method-Project Evaluation and Review Technique (CPM-PERT)

PENERAPAN MANAJEMEN PROYEK DENGAN METODE CPM (Critical Path Method) PADA PROYEK PEMBANGUNAN SPBE

Analisis Penjadwalan Proyek Menggunakan Critical Path Method (CPM) Studi Kasus pada Pembangunan Gapura Taman Hutan Lindung Kota Langsa

Biophysics indicators as the sustainable strategy for river pollution control (case study in Jangkok River, Mataram City, West Nusa Tenggara)

Analysis of Domestic Component Level (TKDN) and Company Benefit Weight (BMP) in Construction Projects

Analysis of The Construction Management Application to Project Success Using Importance Performance Analysis on Superflat Concrete Floor Work

ANALYSIS OF PROJECT TIME AND COST CONTROL WITH CPM, PERT AND CRASHING PROJECT METHODS IN SHOP BUILDING PROJECTS AT CV. MENTARI PERMAI

Pemanfaatan Tanaman Bambu dan Kaliandra untuk Perkuatan Lereng sebagai Upaya Mitigasi terhadap Longsor di Desa Sinarresmi Sukabumi

OPTIMALISASI PENJADWALAN DAN EFISIENSI BIAYA PADA PROYEK PEMBANGUNAN GEDUNG (Studi Kasus Pembangunan RSUD Ketanggungan Kabupaten Brebes)

Community Movement for Sustainable Use of Natural Resources: Case study of North Kendeng Mountain Area, Central Java, Indonesia

VARIABLES AND INDICATORS TO MEASURE THE PERFORMANCE OF SUSTAINABLE CONSTRUCTION PROJECT MANAGEMENT OF CITY PARK

Penjadwalan Ulang Pekerjaan Finishing Proyek Shangrila Hotel Resort and Spa Menggunakan Metode PERT dan FLASH

Analysis of the Effect of Sustainable Business Practices on the Financial Performance of Manufacturing Companies in Jakarta: Case Study on Renewable Energy Use, Waste Management, and Environmental Economic Principles

Participatory Rural Appraisal (PRA) For The Development Of Safe Weaving Bamboo Production Through Community Empowerment To Improve Health And Safety Of Bamboo Weaving Craftsmen In Mojorejo, Ponorogo,East Java, Indonesia

THE INFLUENCE OF SAFETY INDUCTION DESIGN AND MANUFACTURE AT PT. KUNANGO JANTAN PEKANBARU

Optimization of M-PERT & BIM 5D to Minimize the Risk of Time Delay & Overrun in Stadium Project Structure Works: Key Success Factors

Human Resources Management Planning for Increasing Precast Productivity Based on PMBOK at XYZ Company

Analysis of inundation reduction in drainage channels in the coastal area of the City of Palu with environmental insights

Optimalisasi Material Strength Properties Timbunan untuk Kestabilan Lereng Timbunan PT Putra Perkasa Abadi, Site Job PT Makmur Lestari Primatama, Kecamatan Langgikima, Kabupaten Konawe Utara, Provinsi Sulawesi Tenggara

Assessing the sustainability of small hydropower sites in the Citarum Watershed, Indonesia employing CA-Markov and SWAT models