Abstract:Abstract The standard torque and drag (T&D) modeling programs have been extensively used in the oil and gas industry to predict and monitor the T&D forces. In the majority of cases, there has been variability in the accuracy between the pre-calculated (based on a T&D model) and actual T&D values, because of the dependence of the model’s predictability on guessed inputs (matching parameters) which may not be correctly predicted. Therefore, to have a reliable model, program users must alter the model inputs and mainly the friction coefficient to match the actual T&D. This, however, can conceal downhole conditions such as cutting beds, tight holes, and sticking tendencies. The objective of this study is to develop an intelligent machine to predict the continuous profile of the surface drilling torque to enable the detection of operational problems ahead of time. This paper details the development and evaluation of an intelligent system that could promote safer operation and extend the response time limit to prevent undesired events. Actual field data of Well-1, starting from the time of drilling a 5-7/8-in. horizontal section until 1 day prior to the stuck pipe incident, were used to train and test three models: random forest, artificial neural network, and functional network, with an 80/20 training-to-testing data ratio, to predict the surface drilling torque. The independent variables for the model are the drilling surface parameters, namely: flow rate (Q), hook load (HL), rate of penetration (ROP), rotary speed (RS), standpipe pressure (SPP), and weight-on-bit (WOB). The prediction capability of the models was evaluated in terms of correlation of coefficient (R) and average absolute error percentage (AAPE). The model with the highest R and lowest AAPE was selected to continue with the analysis to detect downhole abnormalities. The best-developed model was used to predict the surface drilling torque on the last day leading up to the incident in Well-1, which represents the normal and healthy trend. Then, the model was coupled with a multivariate metric distance called “Mahalanobis” to be used as a classification tool to measure how close an actual observation is to the predictive normal and healthy trend. Based on a pre-determined threshold, each actual observation was labeled “NORMAL” or “ANOMAL.” Well-2 with a stuck pipe incident was used to assess the capability of the developed system in detecting downhole abnormalities. The results showed that in Well-1, where a stuck pipe incident was reported, a continuous alarm was detected by the developed system 9 h before the drilling crew observed any abnormality, while the alarm was detected 7 h prior to any observation by the crew in Well-2. The developed intelligent system could help the drilling crew to detect downhole abnormalities in real-time, react, and take corrective action to mitigate the problem promptly.

A data-driven risk assessment approach for electronic boards used in oil well drilling operations

Risk pre-assessment method for regional drilling engineering based on deep learning and multi-source data

Dynamic risk assessment of deepwater drilling using data-based and probabilistic approach

Deployment of a Hybrid Machine Learning and Physics Based Drilling Advisory System at the Rig Site for ROP Optimization

Intelligent Real-time Drilling Operations Classification Using Trend Analysis of Drilling Rig Sensors Data

Dynamic risk assessment methodology of operation process for deepwater oil and gas equipment

Use of Machine Learning and Data Analytics to Detect Downhole Abnormalities While Drilling Horizontal Wells, With Real Case Study

Real-time Risk Analysis Method for Diagnosis and Warning of Offshore Downhole Drilling Incident

Digital Wellbore Stability Prediction with Machine Learning

Determining Severity of Lateral and Torsional Downhole Vibrations While Drilling Surface Holes Using Three Machine Learning Techniques

Enhancing Intelligent Drilling Rate of Penetration PredictionModeling Through Anomalous Drilling Data Handling Methodology

Real Time Cloud-Based Automation for Formation Evaluation Optimization, Risk Mitigation and Decarbonization

Estimating Downhole Vibration via Machine Learning Techniques Using Only Surface Drilling Parameters

Rotary-percussive drill bit condition prediction using traditional feature engineering and neural network-based feature extraction

Machine Learning Solution for Predicting Vibrations while Drilling the Curve Section

Six Years Operating a Real Time Drilling Problem Detection Software in Deepwater Environments: Results and Challenges

Application of Artificial Intelligence and Machine Learning to Detect Drilling Anomalies Leading to Stuck Pipe Incidents

Dynamic risk assessment of deep-water dual gradient drilling with SMD system using an uncertain DBN-based comprehensive method

New Approach in Real-Time Bit Wear Prediction

Dynamic Bayesian Network-Based Risk Assessment for Arctic Offshore Drilling Waste Handling Practices

Detecting downhole vibrations through drilling horizontal sections: machine learning study