Abstract:By adjusting the content of geopolymer in geopolymer stabilized phosphogypsum (GSP) as roadbed filler, along with the mixing ratio, this paper mainly explores tendencies in the mechanical properties and water stability of GSP. This research is based on macro-mechanical properties such as unconfined compressive strength, resilience modulus, California bearing ratio and shear strength. It is also based on water stability tests, such as the water soaking test, dry and wet cycle test and expansion test, to explore changes in water stability. As for the durability of GSP, this paper is mainly based on the realization of a long time observation of mechanical properties and water stability. In the existing research, most of the stabilized phosphogypsum (PG) base material or roadbed filler consists of cement, lime, etc. In this paper, a new exploration is carried out on the composition of stabilized PG material, realized without the participation of cement. The 28 d compressive strength of GSP reaches 2.5 MPa, and over time this strength grows, which prevents the phenomenon of strength inversion that may occur in conventional cement-stabilized PG. In addition, a long-term soaking experiment was designed in this study based on the material after the strength was stabilized for up to 90 d. After the strength was steady, the GSP with the best water stability still had a softening coefficient of 80% after experiencing water immersion for 7 d. After determining the feasibility of the mechanical properties and water stability of GSP as roadbed filler, we further explored the strength formation mechanism of GSP by microscopic tests (XRD and SEM). This shows that geopolymer can stabilize PG in two main ways: one is the hydration reaction with PG to generate C-S-H gel and ettringite, and the other is to connect PG not involved in the chemical reaction to form a dense whole through generated hydration products. Geopolymer, stabilizing a high amount of PG, not only provides a new method for the consumption of PG, but also has more stable performance than cement, and has certain advantages in economy. In addition, the advantage of this study is that good performance can be achieved by simply sieving PG and adjusting the geopolymer ratio in practical engineering projects.

Sustainable use of recycled glass powder-based geopolymer of organic soil stabilization

Enhancing the Corrosion Resistance of Recycled Aggregate Concrete by Incorporating Waste Glass Powder

Performance enhancement of road base material using calcium carbide residue and sulfonic acid dilution as a geopolymer stabilizer

Improvement of mechanical strength of low-plasticity clay soil using geopolymer-based materials synthesized from glass powder and copper slag

Experimental Feasibility Study of Geopolymer As the Next-Generation Soil Stabilizer

Synergistic effects of recycled demolition waste and GGBS-FA based geopolymers on the mechanical properties and stabilization mechanism of high plasticity clay

Experimental Investigation of Unconfined Compression Strength and Microstructure Characteristics of Slag and Fly Ash-Based Geopolymer Stabilized Riverside Soft Soil

Use of Waste Glass Powder toward more Sustainable Geopolymer Concrete

Evaluation on the Mechanical Properties of Ground Granulated Blast Slag (GGBS) and Fly Ash Stabilized Soil via Geopolymer Process

Characteristic evaluation of geopolymer based lateritic soil stabilization enriched with eggshell ash and rice husk ash for road construction: An experimental investigation

Geotechnical Behaviour of Gypseous Soil Treated by Geopolymer Additives

Factors Affecting the Strength Formation Mechanism and Water Stability of Geopolymer Stabilized Phosphogypsum in Road Construction

Chemical stabilization of demolition wastes in pavement bases using one–part fly ash and slag based geopolymers

Study on basic performance and drying shrinkage of binary solid waste geopolymer prepared with recycled powders and slag

Mechanical characteristics of Soil-RAP-Geopolymer mixtures for road base and subbase layers

The Synergistic Mechanism and Stability Evaluation of Phosphogypsum and Recycled Fine Powder-Based Multi-Source Solid Waste Geopolymer

Calcium-Free Geopolymer As A Stabilizer for Sulfate-Rich Soils

Multiscale experimental analysis of marine clay stabilized with coal gangue–calcium carbide residue geopolymer

Strength Performance of Soft Clayey soil Solidified by Slag- Fly Ash – Metakaolin Based Geopolymer

Performances of Using Geopolymers Made with Various Stabilizers for Deep Mixing

Modeling and optimization of fly ash–slag-based geopolymer using response surface method and its application in soft soil stabilization