Abstract:Concrete structures often fail to perform their original functions due to problems such as deterioration and damage over time. Therefore, various repair materials have been studied to maintain deteriorated concrete structures. This study experimentally investigated the mechanical properties of high-early-strength cement-based repair materials for spraying. For spraying, the cement-based materials should have adoptable fluidity and strength: 200 ± 100 mm for flow; 20 MPa at 24 h and 40 MPa at 28 days for compressive strength, and 8 MPa at 28 days for flexural strength. Wollastonite mineral fibers (3–5 wt.%) and styrene–butadiene (SB) latex (5–7 wt.%) were studied to enhance this requirement. Fluidity was evaluated by flow test and measuring the heat of hydration; mechanical properties were evaluated in terms of compressive and flexural strength. The cement-to-silica sand ratio (C:S ratio) was also applied differently to adjust the pot life of polymer cement-based material (1:1 and 1:1.5) as a binder. Because wollastonite mineral fibers and SB latex affect workability, the water-to-binder ratio was regulated to reach the target flow according to the amount of wollastonite mineral fibers and SB latex. Regardless of the C:S ratio, all studied mixtures met the target 28 day compressive strength at 24 h, decreasing in strength with increasing amounts of wollastonite mineral fibers and latex. Flexural strength also fulfilled the target value, and it increased with increasing amounts of wollastonite mineral fibers and latex, unlike compressive strength. The optimal mix proportion of high-early-strength cement-based repair materials constituted 3 wt.% wollastonite mineral fibers and 5 wt.% SB latex as the binder in a C:S ratio of 1:1.5.

Evaluation of self-compacting concrete for concrete repair applications

Development of Sustainable Self-Compacting Concrete Using Recycled Concrete Aggregate and Fly Ash, Slag, Silica Fume

Mechanical and Durability Properties of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregate and Fly Ash, Slag and Silica Fume

Study of effect of paste volume, water to cementitious materials and fiber dosages on rheological properties and in-situ strength of self-compacting concrete

Experimental Investigation of Self-Compacting Concrete with Recycled Concrete Aggregate

Performance and Uniformity of Self-Compacting Concrete

Investigation of self-compacting concrete utilizing different supplementary pozzolanic materials for cement replacement

Properties and durability of self‐compacting concrete incorporated with nanosilica, fly ash, and limestone powder

Evaluation of Fluidity and Strength of High-Early-Strength Cement-Based Repair Materials by Adding SB Latex and Wollastonite Mineral Fibers

Shrinkage and Creep of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregates, Fly Ash, Slag, and Silica Fume

Experimental and predictive study of self-compacting concrete containing reclaimed asphalt pavement

Fresh and Mechanical Properties of Self-Consolidating Concrete Incorporating Silica Fume and Metakaolin

Influence of Mixture Proportions on Fresh and Mechanical Properties of Self-consolidating Concrete

Synergizing Portland Cement, high-volume fly ash and calcined calcium carbonate in producing self-compacting concrete: A comprehensive investigation of rheological, mechanical, and microstructural properties

The Effect of Low Velocity Impact Loading on Self-Compacting Concrete Reinforced with Carbon Fiber Reinforced Polymers

Assessment of fluidity retention, mechanical strength and cost production of blended cement self-compacting concrete using the concept of a performance index

Effect of Micro-Silica on Fresh and Hardened Properties of Self-Compacting Concrete Reinforced with Glass and Polyvinyl Alcohol Fibres

Study of the durability of self-compacting concrete made from recycled gravel

Utilization of waste concrete recycling materials in self-compacting concrete

Modeling the Properties of Sustainable Self-Compacting Concrete Containing Marble and Glass Powder Wastes Using Response Surface Methodology

Examination of the Physical–Mechanical Properties of Sustainable Self-Curing Concrete Using Crushed Ceramic, Volcanic Powder, and Polyethylene Glycol