Abstract:This study analyzes the economics of combined cargo containment systems and boil-off hydrogen (BOH) handling systems for large-scale liquid hydrogen (LH 2 ) transportation. In large-scale LH 2 transportation, addressing the issue of pressure increase in LH 2 storage tanks due to BOH is the most critical technical challenge. To handle this, there are three options: using high-pressure storage tanks, reducing pressure by reliquefying BOH through a reliquefaction system, and utilizing BOH as fuel for ship propulsion. This study conducts a comprehensive economic analysis of these three options using life-cycle cost (LCC) analysis. Additionally, the impact of the insulation-layer thickness of the LH 2 storage tank on economic feasibility was examined, using the concept of the levelized shipping cost of hydrogen (LSCOH), which represents the cost of transporting a unit of hydrogen. Among the options, Option 1 involving high-pressure storage using high design-pressure tanks indicate the lowest LSCOH value of 0.394/kgH2 and $0.421/kgH2, respectively, at insulation-layer thicknesses of 0.7 and 1.0 m, respectively. These results indicate that the thermodynamic and structural analysis, along with the economic evaluation of LH 2 storage tanks, suggest that designing high-pressure storage tanks capable of withstanding the pressure increase during navigation is more economical than adding and operating re-liquefaction system or using expensive hydrogen as ship propulsion fuel to manage BOH. Additionally, sensitivity analysis is performed on the main cost-influencing factors and a larger-scale LH2 carrier is analyzed. The results of this study present both absolute and relative economic analysis results for BOH handling options and suggest that there is an optimal insulation-layer thickness of LH 2 storage tanks that can transport LH 2 most economically.

Development of Strength Evaluation Methodology for Independent IMO TYPE C Tank with LH2 Carriers

DESIGN AND OPTIMIZATION OF HIGH-PRESSURE HYDROGEN CYLINDERS FOR INTERMODAL CONTAINER TRANSPORTATION

A Study on Welding Sensitivity Assessment and Deformation Control of International Maritime Organization Type C Liquefied Natural Gas Fuel Tank Support Structures Using the Direct Inherent Strain Method

Finite element analysis of strength of mobile cryogenic LNG storage tank

Structural Strength Assessment of 20-ft LNG ISO Tank: an Investigation of Finite Element Analysis and ASME Design Guidance

Instability Analysis and Development of High Pressure Hydrogen Storage Vessels

Fatigue Analysis of a 40 ft LNG ISO Tank Container

Procedure for evaluation of LNG CCS with reference vessel using nonlinear dynamic analysis

Design Fatigue Life Evaluation of High-Pressure Hydrogen Storage Vessels Based on Fracture Mechanics

Strength analysis measures of LNG ship with independent type B tanks under sloshing load

A review of methods to study the fatigue life of nodes connecting marine composite hydrogen storage tanks to ships under the action of external forces

Thermal Stress Analysis of Process Piping System Installed on LNG Vessel Subject to Hull Design Loads

Multimode Coupled Failure Assessment of an LNGC Cargo Containment System Considering Flexible Boundary Condition

Research on the strength assessment method of large LNG tank’s pump tower based on API rules

Micromechanics-based Burst Failure Analysis of Composite Vessel Used for Hydrogen Storage

CFD Analysis on Heat Leakage, Self-Pressurization in Liquid Hydrogen Storage Tank

A Study on the Thermal Behavior of Series and Parallel Connection Methods in the Process of Hydrogenation of Ship-Borne Hydrogen Storage Cylinder

Economic analysis of cargo containment systems and boil-off hydrogen handling options for large-scale liquid hydrogen carriers considering insulation-layer thickness of liquid-hydrogen storage tank

Strength analysis of LNG tank container for trains under inertial force

Numerical Simulation and Experiment Verification of the Static Boil-off Rate and Temperature Field for a New Independent Type B Liquefied Natural Gas Ship Mock Up Tank

Modelling of Boil-Off and Sloshing Relevant to Future Liquid Hydrogen Carriers