Abstract:Cellulose nanofibers (CNFs) have been widely used as functional fillers in polymer composites. In the present study, polymer composite nanofibrous nonwoven air filters containing CNFs were prepared, and the additive effect of CNFs on their performance was then investigated. CNFs with an average diameter of approximately 25–37 nm were obtained by water-jet nanofibrillation of pulps from dominant tree species in Japan, Japanese cedar, Japanese white birch, and bamboo. The filters were prepared by coating polymer/CNF composite nanofibers on polyester nonwoven substrates by Zetta spinning from poly(ethersulfone) (PES)/CNF composite solutions. The average diameter of the prepared composite nanofibers ranged from 67 to 89 nm. Aerosol filtration tests clearly indicate that the addition of a small amount of CNFs (∼0.8 wt %) to the PES nanofibers improves the filtration efficiency without reducing the transport properties. The maximum quality factor of PM0.4 at a face velocity of 5.3 cm/s is ∼0.08 Pa–1, verifying the superior quality of the prepared composite nanofibrous filters. Our transmission electron microscopy observation and nitrogen gas and water vapor adsorption experiments suggest that the improvement in filtration efficiency occurs due to the surface functions of the added CNFs. These findings indicate that CNFs are a promising green filler for improving air filtration performance without the chemical modification of polymeric nanofibers.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsapm.0c00374.Data on compositions of CNFs from Japanese trees, filtration performances from the literature, schematic of Zs process, chemical structure of PES, schematic of the apparatus for the aerosol filtration tests, N2 gas and water vapor absorption isotherms of the nanofibrous web layers with and without CNFs, schematic of the scaled-up manufacturing process of the PES/CNF composite nanofiber nonwoven air filters for the prototype air filter unit, surface SEM images of the scaled-up manufactured PES/CNF1 composite nanofibrous nonwoven filters by Zs, and photograph of the prototype air filter unit containing the PES/CNF1 composite nanofibrous nonwoven filters (PDF)This article has not yet been cited by other publications.

Nanoparticle-Modified Cassia Fistula Sawdust-Based G-Filters for Fluoride Removal from Drinking Water

Synthesis of multifunctional activated carbon nanocomposite comprising biocompatible flake nano hydroxyapatite and natural turmeric extract for the removal of bacteria and lead ions from aqueous solution

Assessment of the physiochemical properties and sustainability of locally produced ceramic G-filter in a long term experiment

Robust and Highly Efficient Free‐Standing Carbonaceous Nanofiber Membranes for Water Purification

Preparation of affordable and multifunctional clay-based ceramic filter matrix for treatment of drinking water

Ceramic Filters Coated with Green Ag-Nanoparticles for Drinking Water Treatment in Rural Households of Nigeria

A Bio-Based Nanofibre Hydrogel Filter for Sustainable Water Purification

Investigations and comparison of a conventional sand filter and a modified sand filter for water purification.

Low-Cost ceramic disk filters coated with Graphitic carbon nitride (g-C3N4) for drinking water disinfection and purification

Utilization of Chitosan and Cassia (Cassia fistula) Seed Extract Based Filters in Efficient Wastewater Management

Cellulose nanofiber aerogels modified with titanium dioxide nanoparticles as high-performance nanofiltration materials

Heavy metal ions and particulate pollutants can be effectively removed by a gravity-driven ceramic foam filter optimized by carbon nanotube implantation

Wood‐Derived Nanofibrillated Cellulose Hydrogel Filters for Fast and Efficient Separation of Nanoparticles

High-Quality Nanofibrous Nonwoven Air Filters: Additive Effect of Water-Jet Nanofibrillated Celluloses on Their Performance

Activated Alumina Granules with nanoscale porosity for water defluoridation

Hybrid Hollow Fiber Nanofiltration-Calcite Contactor: A Novel Point-of-Entry Treatment for Removal of Dissolved Mn, Fe, NOM and Hardness from Domestic Groundwater Supplies

Development of free flowing granular hybrid functionalized clay sorbent filters for chromium removal from waste water

Cellulose nanocrystal/halloysite nanotube composite aerogels for water purification

An Evaluation of Carbon Nanotube-Based and Activated Carbon-Based Nanocomposites for Fluoride and other pollutant Removal from water: A Review

Developing Cost-Effective and Efficient Drinking Water Treatment Technology for the Removal of Salinity and Suspended Solids

PERFORMANCE EVALUATION OF CLAY-SAWDUST COMPOSITE FILTER FOR POINT OF USE WATER TREATMENT