Abstract:<p>Dynamic failures (e.g., crater, crack and spall) can be observed in concrete structures when suffered from possible blast and impact loadings. Understanding the physical mechanisms behind these failures needs a sound material model that thoroughly considers the damage mechanisms of concrete material, especially under the high confinement situation existed near the projectile and explosion. Modelling the damage mechanisms is a challenging problem that is not fully resolved in the commonly-used concrete material models. In this study, three kinds of damage mechanisms of concrete material, i.e., the hydrostatic damage due to pore collapse, shear damage due to shear-induced microcracking and tensile damage due to tensile microcracking are identified and physically modelled respectively using corresponding damage indexes. The interaction of the three damage is also considered by introducing two stress-dependent factors. The damage model is implemented into the Kong-Fang material model recently proposed, in which improvements on the strength surfaces, strain-rate enhancement and erosion criterion are accompanied made based on a few years use of this model. Numerical triaxial compression test and hydrostatic compression to unconfined compression test are conducted using a single element to validate the proposed hydrostatic damage model and the shear damage model. And the competition mechanism between hydrostatic damage and shear damage during the triaxial compression test is discussed. Then the modified Kong-Fang model is used to numerically simulate the reinforced concrete slabs subjected to a contact explosion load and projectile impact load, in which the physical mechanisms of the experimentally observed crater, crack, tunnel and spall failures are revealed.</p>

Improved fully coupled peridynamic model for analyzing the compressive behaviour of concrete under sulfate attack

Fully coupled peridynamic model for analyzing the chemo-diffusion-mechanical behavior of sulfate attack in concrete

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

An improved mesoscale damage model for quasi-brittle fracture analysis of concrete with ordinary state-based peridynamics

A mechanical-diffusive peridynamics coupling model for meso-scale simulation of chloride penetration in concrete under loadings

New concrete cracking model established based on fracture mechanics and damage theory

Peridynamic modeling for impact failure of wet concrete considering the influence of saturation

A chemo-mechanical coupling model for concrete lining subjected to external sulfate attack

Improved peridynamics approach for the progressive fracture of marine concrete

A chemo-micromechanical damage model of concrete under sulfate attack

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

A rate-dependent dynamic damage model in peridynamics for concrete under impact loading

A Chemical-Transport-Mechanics Numerical Model for Concrete under Sulfate Attack

An enhanced damaged plasticity model for concrete under cyclic and monotonic triaxial compression

Investigation on the quasi-plasticity damage model for concrete with micro-pores based on peridynamics

Damage Constitutive Model and Mechanical Performance Deterioration of Concrete under Sulfate Environment

Peridynamic modeling and simulations on concrete dynamic failure and penetration subjected to impact loadings

An improved damage-plasticity material model for concrete subjected to dynamic loading

Modelling damage mechanisms of concrete under high confinement pressure

Modeling of Concrete Deterioration under External Sulfate Attack and Drying-Wetting Cycles: A Review

Three-Dimensional Bond Model Considering the Coupled Damage Effect for Dowel Action