Abstract:The paper presents research results and a comparative analysis of the load-bearing deformability and crack resistance of basalt concrete beams brought to the limit state (ULS) in previous tests. The beams were reinforced with prestressed metal clips under high-level static and low-cycle alternating loads. The work performed comparative calculations of reinforced building structures using proprietary methods and existing regulatory methods. A comparison of the experimental and calculated values of the bearing capacity of damaged experimental beam samples showed their unsatisfactory convergence because the well-known regulatory and proprietary methods provide for the calculation of the bearing capacity of damaged reinforced concrete structures along a dangerous inclined crack under the predominant action of transverse force, i.e. the top of a dangerous inclined crack and clamps and vertical elements of external reinforcement. However, experimental and theoretical studies have shown that the destruction of prototype beams with large and medium shear spans under a variable low-cycle load occurs along dangerous inclined through cracks, from the overwhelming action of bending moments, in the longitudinal reinforcement elements of the frame, in the longitudinal tensile reinforcement, as well as transverse beam beams and yield stress cages. That is, the real physical picture of the operation of the system “damaged reinforced concrete beam – prestressed metal reinforcement cage” under alternating transverse load at high levels differs significantly from the physical model of previously existing regulatory and proprietary methods. All existing regulatory and proprietary methods provide for the calculation of the bearing capacity of damaged reinforced concrete structures along a dangerous inclined crack under the predominant action of transverse force, that is, the components of the bearing capacity of inclined sections on concrete above the top of a dangerous inclined crack and clamps and external elements are taken into account. Experimental and theoretical studies have shown that the destruction of prototype beams with large and medium shear spans, under alternating low-cycle loads, occurs along dangerous inclined through cracks from the overwhelming action of bending moments in the longitudinal tensile reinforcement, as well as in the transverse rods of the beam and the cage yield strength.

LOAD-BEARING CAPACITY OF LIGHTWEIGHT REINFORCED CONCRETE BEAMS BY NON-REMOVABLE SPHERICAL VOID GENERATORS

Experimental study of an innovative steel-concrete composite beam under hogging moment

Numerical Simulation of the Bearing Capacity of Variotropic Short Concrete Beams Reinforced with Polymer Composite Reinforcing Bars

Bearing Capacity near Support Areas of Continuous Reinforced Concrete Beams and High Grillages

AUTHOR'S METHOD FOR DETERMINING THE BEARING CAPACITY OF INCLINED SECTIONS OF BEAM STRUCTURES UNDER REPEATED LOADS

Experiment and Analysis of Mechanical Properties of Lightweight Concrete Prefabricated Building Structure Beams

Comparative analysis of the load-bearing capacity of experimental damaged reinforced concrete elements reinforced with metal clips

Loading capacity of composite slim frame beams

Ultimate Bearing Capacity of Steel-Reactive Powder Concrete Composite Beams

Behavior of a Two-Way Lightweight Steel–Concrete Composite Slab Voided with Thin-Walled Core Boxes towards Sustainable Construction

Available rotation capacity of composite beams with high-strength materials under sagging moment

A New Analytical Model for Deflection of Concrete Beams Reinforced by BFRP Bars and Steel Fibres under Cyclic Loading

Quantifying the Residual Stiffness of Concrete Beams with Polymeric Reinforcement under Repeated Loads

Improvement in the Reinforced Concrete Beam with Embedded Polystyrene under Static Load

Analysing the Confinement Effect in Hollow Core Steel-Concrete Composite Columns under Axial Compression

Experimental investigation on flexural performance of concrete beams strengthened with SMA-GFRP-ECC smart composite materials

Bearing Capacity of Built-Up Structures of Multi-storey Buildings, Taking into Account Ultimate Concrete Strains and Shear Braces

Flexural Capacity Prediction Model for Steel Fibre-Reinforced Concrete Beams

Flexural behavior of 15-year-old full-scale hollow slab beams strengthened with fiber-reinforced composites

Seismic Performance of a Reinforced Lightweight Aggregate Concrete Frame

Lightweight Designs and Improving the Load-Bearing Capacity of Structures by the Method of Aggregation