Abstract:Hybrid fuel cell and battery systems are currently among the most promising options for increasing the flight autonomy of unmanned aircraft systems. The ratio between the size of the battery and the fuel cell is a delicate issue in power system design. Both devices are necessary; the battery, with a quick response, to respond to demand peaks, and the fuel cell, with a slow dynamic response, but greater energy density, to increase its autonomy. One of the most important tasks in designing the hybrid system is selecting the appropriate size of each component so that it can respond to peak demands, extend its autonomy as far as possible and reduce its weight. The purpose of this research was to establish a design procedure for hybrid power systems for unmanned aerial systems, which means selecting the best size for each component. The hybrid system's modeling and the dynamic simulation of its response to demand curves are the foundation of this procedure. The simulation results include the consumption of the fuel cell as a function of time, the battery's charge status and an estimate of its autonomy for each demand curve. The analysis of the simulation results guides the choice of component size, adapting each one to achieve minimum fuel consumption for the characteristic demand curves for which the unmanned aircraft system is designed. After modeling the components of the hybrid system and describing the simulation procedure, this contribution proposes an example of a design for an unmanned aircraft system with a maximum takeoff weight of 20 kg. In this case, the most appropriate size for the fuel cell was 2000 W and a 3000 mAh 10S Lithium-Polymer battery. Fitted with a 12-liter hydrogen tank, stored at a maximum pressure of 300 bar, an estimated autonomy of 1.5 h can be expected.

The perspective of application and calculation of hybrid power plants in vertical take-off and landing aircraft Part 2. Calculation of the main parameters of the hybrid power plant

Analysis of prospects for the use of hybrid power plants in vertical takeoff and landing aircraft

Performance Analysis and Optimization of Hybrid-electric-propulsion Aircraft with Multidisciplinary Surrogate Models

Investigating the Potential of Parallel Hybrid-Electric Retrofit of Narrow-Body Airliner for Emission Reduction

Overall Evtol Aircraft Design for Urban Air Mobility

Retrofit and New Design of Regional Aircraft with Hybrid Electric Propulsion

Research on Large Hybrid Electric Aircraft Based on Battery and Turbine-Electric

Optimization and Analysis of Hybrid Electric System for Distributed Propulsion Tilt-Wing UAV

Method of first-approximation calculation of take-off weight of a light aircraft with a hybrid propulsion system

An Optimal Design of Aircraft Hybrid Powertrain Based on a Coupled Method

A Comparative Assessment of Hybrid Parallel, Series, and Full-Electric Propulsion Systems for Aircraft Application

Conceptual study of a mechanically integrated parallel hybrid electric turbofan

Design methodology and simulation analysis of hybrid fuel cell and battery systems for powering unmanned aircraft systems

Fuzzy Logic-Based Energy Management Strategy of Hybrid Electric Propulsion System for Fixed-Wing VTOL Aircraft

A rule-based energy management strategy for hybrid powered eVTOL

Analysis of a hydrogen fuel cell-PV power system for small UAV

Optimal sizing of hybrid electric propulsion system for eVTOL

Optimization Design of SOFC-GT Hybrid Power System for Aviation Application

A coordinated optimization method of energy management and trajectory optimization for hybrid electric UAVs with PV/Fuel Cell/Battery

Hybridization of training aircraft with real world flight profiles

Energy management strategy of hybrid energy system for a multi-lobes hybrid air vehicle