Abstract:Due to the high mobility and toxicity of Cr(VI), it is of significance to develop a low-cost and effective method to treat Cr(VI) contained wastewater. Currently, constructed wetland combined with microbial fuel cell (CW-MFC) technique has exhibited the possibilities in Cr(VI) removal. However, the influence of filler media was still unclear. In this study, the up-flow CW-MFC systems with different fillers were constructed to investigate Cr(VI) removal and electricity generation, including bio-ceramic (CW-MFC1), zeolite (CW-MFC2), calcite (CW-MFC3), and volcanic rock (CW-MFC4). Cr(VI) absorption ability of fillers was negligible during the long operation period. Over 93% COD removal was observed in all systems, and Cr(VI) removal rate was as follow: CW-MFC4 (99.0%) > CW-MFC2 (95.5%) > CW-MFC3 (89.7%) > CW-MFC1 (72.2%). Most of Cr(VI) ions were converted to Cr(III) precipitation and immobilized in the anode layer, followed by the bottom layer. There was a competitive relationship between the bottom microbes and anode layer microbes. Bio-ceramic is easy to realize immobilization of microorganisms, which as filler (CW-MFC1) showed the lowest removal rate of Cr(VI) in CW-MFC1 system, due to superabundant organic matter consumed by microorganisms of filler layer weakening the action of anodic microbes. Besides, calcite with lower specific surface area and less porous structure than volcanic rock and zeolite was unbeneficial to microbial living, leading to bottom layer lower Cr(VI) removal in CW-MFC3. Both output voltage and maximum power density of CW-MFC system were as the following order: CW-MFC3 > CW-MFC 4 > CW-MFC2 > CW-MFC1. This was mainly because higher organic matter were consumed (higher COD removal rate) in anode layers, more electricity was generated by exoelectrogenic microbes. Therefore, volcanic rock as fillers was the best choice, which could maximize Cr(VI) removal (99.0%) and obtain the preferable electricity generation (0.595 ± 0.019 V of output voltage, 0.462 W/m3 of power density). In addition, microbial communities analysis indicated that microbial richness of cathode was higher than anode due to the long Cr(VI) stress, and Acetoanaerobium and Exiguobacterium were the dominant genera in anode and cathode, respectively.

Optimization of a constructed wetland-microbial fuel cell system for Cr(VI) removal from wastewater and power generation performance

Treatment mechanism of hexavalent chromium wastewater in constructed wetland-microbial fuel cell coupling system

Performance of lab-scale microbial fuel cell coupled with unplanted constructed wetland for hexavalent chromium removal and electricity production

Acorus calamus L. constructed wetland-microbial fuel cell for Cr(VI)-containing wastewater treatment and bioelectricity production

Simultaneous Treatment of Chromium-Containing Wastewater and Electricity Generation Using a Plant Cathode-Sediment Microbial Fuel Cell: Investigation of Associated Mechanism and Influencing Factors

Efficacy and Mechanism of Microbial Fuel Cell Treating Cr(VI)-containing Wastewater with Anaerobically Fermented Sludge As Substrate

Removal of Cr(VI) and electricity production by constructed wetland combined with microbial fuel cell (CW-MFC): Influence of filler media

Simultaneous removal of heavy metals and bioelectricity generation in microbial fuel cell coupled with constructed wetland: an optimization study on substrate and plant types

Removal and reduction mechanism of Cr (VI) in Leersia hexandra Swartz constructed wetland-microbial fuel cell coupling system

Electricity generation during wastewater treatment by a microbial fuel cell coupled with constructed wetland

Enhancement of hexavalent chromium reduction and electricity production from a biocathode microbial fuel cell

Potential of Novel Wastewater Treatment System Featuring Microbial Fuel Cell to Generate Electricity and Remove Pollutants

Cr(Ⅵ)-containing wastewater treatment coupled with electricity generation using microbial fuel cell

Optimization of Bioelectricity Generation in Constructed Wetland-Coupled Microbial Fuel Cell Systems

Accelerated Pb(II) removal and concurrent bioelectricity production via constructed wetland-microbial fuel cell: Structural orthogonal optimization and microbial response mechanism

Application of microbial fuel cells with tungsten-based semiconductor modified electrode in the treatment of Cr (VI) pollutions

Research Progress of Constructed Wetlands Coupled with Microbial Fuel Cells for the Treatment of Heavy Metal Wastewater

Engineering extracellular electron transfer to promote simultaneous brewing wastewater treatment and chromium reduction

Performance optimization of two-stage constructed wetland-microbial fuel cell system for the treatment of high-concentration wastewater

Effects of Hydraulic Retention Time on Removal of Cr (VI) and p-Chlorophenol and Electricity Generation in L. hexandra-Planted Constructed Wetland–Microbial Fuel Cell

Constructed wetland-microbial fuel cells enhanced with zero-valent iron for wastewater treatment and power generation