Abstract:This article characterized the mechanical performance and failure mode of single‐lap joints of carbon fiber reinforced boron‐modified phenolic resin plastic (CF/BPR) and TC4 titanium alloy by quasi‐static tensile tests at four temperatures (25, 100, 175, and 250°C). And the validated finite element model was used to analyze the damage propagation of SLJs. This article characterized the mechanical performance and failure mode of single‐lap joints (SLJs) of carbon fiber reinforced boron‐modified phenolic resin plastic (CF/BPR) and TC4 titanium alloy by quasi‐static tensile tests at four temperatures (25, 100, 175, and 250°C). The experimental results indicated that the shear strength of SLJs is 10.8 MPa at 25°C, which experiences monotonic drop to 80%, 42.6%, and 18.5% with temperature increase from 100 to 175°C, and to 250°C, respectively. Additionally, there was a transformation in the failure mode from composite material failure to cohesive failure in the adhesive along with the temperature increase. The intralaminar elasticities of CF/BPR were predicted using representative volume element (RVE), and the mechanical properties of three types of bondlines (i.e., the interlamination, interface of CF/BPR and the epoxy adhesive layer) were determined by both experiment and predictive methods. A finite element model taking into account the intralaminar damage of CF/BPR and the cohesive behavior of three bondlines was established. The simulated results showed good consistency with the experimental data for failure prediction, and the mechanical performance and damage propagation of SLJs at different temperatures were discussed. This research provides reference for the design and manufacture of high‐temperature bonded structures. Highlights RVE and degradation factor methods evaluate the elasticity of composite material. Four types of damage behaviors are considered in the established FE model. The SLJs exhibit single or multiple failure modes at different temperatures. The mechanical properties of SLJs severely degraded with increasing temperature.

Effect of composite lattice on the high-temperature compressive behavior of silicone rubber based ablative materials

Numerical analysis of ablative behavior of silicone resin coated carbon fabric

Comparison of the ablative performance of silicone rubber‐based composites by analyzing a large number of samples

Mechanical Properties and Microstructures of Steel-basalt Hybrid Fibers Reinforced Cement-based Composites Exposed to High Temperatures

Improving high heat flux ablation resistance of silicone rubber composites by laying low-areal-density carbon fiber fabrics

Mechanical performance of adhesively bonded carbon fiber reinforced boron‐modified phenolic resin plastic‐titanium single‐lap joints at high temperature

Evolution of strain-rate dependent compressive failure behavior of ceramifiable FRP composites at high temperature conditions

Improved Thermal Stabilities, Ablation and Mechanical Properties for Carbon Fibers/Phenolic Resins Laminated Composites Modified by Silicon-containing Polyborazine

Effect of SiC on the anti-ablation resistance and flexural strength of (Hf-Ta-Zr)C-C/C composites

Silicone-grafted epoxy/carbon fiber composites with superior mechanical/ablation performance

Improving ablation properties of liquid silicone rubber composites by in situ construction of rich‐porous char layer

Oxidation and ablation behaviors of carbon fiber/phenolic resin composites modified with borosilicate glass and polycarbosilane interface

Understanding the Role of Carbon Fiber Skeletons in Silicone Rubber-Based Ablative Composites

In-situ constructing SiC frame in silicone rubber to fabricate novel flexible thermal protective polymeric materials with excellent ablation resistance

Significantly improved ablation properties under high heat flux environment based on carbon fiber reinforced Zr-doped silicone rubber

Elevated temperature compression behaviors of 3D printed hollow pyramidal lattice sandwich structure reinforced by truncated square honeycomb

Long‐term oxidation and ablation behavior of Cf/ZrB2–SiC composites at 1500, 2000, and 2200°C

Thermal oxidation and compressive failure behavior of ZrSi2–B4C modified phenolic resin-based composite

Numerical Simulation of Compressive Mechanical Properties of 3D Printed Lattice-Reinforced Cement-Based Composites Based on ABAQUS

In situ construction of fiber‐supported micro‐porous char structure to enhance anti‐ablative performance of silicone rubber composites

Ablation properties of zinc borate and aluminum hypophosphite filled silicone rubber composites