Joining mechanism evolution of fusion welded TC4 titanium alloy/304 stainless steel dissimilar joint by GTAW
Xiaohu Hao,Xinlong Wei,Shuhua Li,Zeqin Cui,Wenxian Wang,Honggang Dong,Weiguo Li,Xiaohu HaoXinlong WeiShuhua LiZeqin CuiWenxian WangHonggang DongWeiguo Lia College of Materials Science and Engineering,Taiyuan University of Technology,Taiyuan,People's Republic of Chinab Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering,Taiyuan,People's Republic of Chinac Key Enterprise Laboratory of Ship Advanced Welding Technology,CSSC Huangpu Wenchong Shipbuilding Company Limited,Guangzhou,People's Republic of Chinad School of Materials Science and Engineering,Dalian University of Technology,Dalian,People's Republic of Chinae Engineering Training Center,Taiyuan University of Technology,Taiyuan,People's Republic of China
DOI: https://doi.org/10.1080/13621718.2023.2264572
2023-10-07
Science and Technology of Welding & Joining
Abstract:Gas tungsten arc welding with a pure Cu filler wire was carried out to join the TC4 titanium alloy and 304 stainless steel. Filling pure Cu filler wire assisted with regulating welding current could effectively restrain the concentrated generation of Ti–Fe brittle intermetallic compounds. Three joining modes exist in the fusion welding titanium alloy and stainless steel. In the partial fusion welding mode, the TiCu phase decreased and the fine granular τ 2 phase formed in the Ti/Cu interfacial zone, simultaneously, the molten zone consisted of a Cu solid solution and α-(Fe, Cr) phase formed at the Cu/Fe interface, resulting in mechanical interlocking effect and consequent high tensile strength of 363 MPa. Increasing the welding current would lead to the alloying of Ti x Cu y phases, and then enhance the Ti/Cu interface.
materials science, multidisciplinary,metallurgy & metallurgical engineering