Abstract:Lithium-ion battery separators play a role in maintaining battery safety and providing a path for ion transfer in the electrolyte. Polyolefin polymers such as polypropylene and polyethylene are the most common basic separator materials and have been commercialized. However, this type of separator has a weakness, namely low ion conductivity because the material is hydrophobic. Therefore, the separator is modified by adding inorganic materials such as mesoporous silica to increase ion conductivity so that battery performance increases. This research aims to synthesize mesoporous silica as a filler in polyvinyl alcohol/chitosan (PVA/CS) composite membranes as a candidate separator for lithium-ion batteries. Mesoporous silica was synthesized using the hydrothermal method. Then, the obtained mesoporous silica was applied as a filler in the PVA/CS mixture membrane using the phase inversion method. The results of FTIR characterization show that the mesoporous silica sample has vibration peaks indicating the presence of siloxane (Si-O-Si) and silanol (Si-OH) groups. Based on the acidity test results, SM11 and SM12 each contain a Lewis acid site, and the same Bronsted site detected in the FTIR absorption peak. Mesoporous silica added to the PVA/CS composite membrane causes a decrease in the resistance value of the material and indicates an increase in the membrane's ability to conduct ions. Apart from that, the addition of mesoporous silica material also reduces the membrane resistance value which has implications for increasing the porosity of the composite membrane.

SYNTHESIS OF POLYVINYL ALCOHOL/CHITOSAN COMPOSITE MEMBRANES WITH MESOPOROUS SILICA FILLER AS A CANDIDATE LITHIUM-ION BATTERY SEPARATOR

Preparation and Characterization of PVDF/P（MMA-co-DMAEMA） Separators for Lithium Battery

Effects of PDMS with Polyether Side Chains on the Fluoropolymer Based Gel Lithium Electrolytes

High Thermal Resistance Polyimide Separators Prepared Via Soluble Precusor and Non-Solvent Induced Phase Separation Process for Lithium Ion Batteries

Fabrication of PVA/SiO2 (Nanofiber) Membranes Prepared Using Electrospinning Method for Lithium Battery Separator

Preparation Of Poly (Dimethylsiloxane) Graft (Poly(Propylene Oxide)-Block-Poly (Ethylene Oxide) Modified Pvdf Separator And Its Use In Lithium Ion Batteries

Optimizing Lithium-Ion Battery Discharge Capacity Performance by Nanosilica-Modified Poly (Vinyl Alcohol) Separator

Effect of Silica/Polyvinyl Alcohol Porous Layers on Performance of Polypropylene Separators for Lithium ion Batteries

Preparation and Properties of Poly (vinylidene Fluoride)/poly(dimethylsiloxane) Graft (poly(propylene Oxide)-Block-poly(ethylene Oxide)) Blend Porous Separators and Corresponding Electrolytes

The Physicochemical Properties of PVDF/SiO2 Composite Nanofibers for Potential Application of Lithium-Ion Battery Separators

Fabrication and Investigation of PE-SiO2@PZS Composite Separator for Lithium-Ion Batteries

Cellulose/Polysulfonamide Composite Membrane as a High Performance Lithium-Ion Battery Separator

Fabrication electro-spun Poly(vinyl alcohol)-Melamine nonwoven membrane composite separator for high-power lithium-ion batteries

A Nano-Silica Modified Polyimide Nanofiber Separator with Enhanced Thermal and Wetting Properties for High Safety Lithium-Ion Batteries

Preparation and Performance of Silica/polypropylene Composite Separator for Lithium-Ion Batteries

Thermally stable and green cellulose-based composites strengthened by styrene-co-acrylate latex for lithium-ion battery separators

Gel polymer electrolytes based on active PVDF separator for lithium ion battery. I: Preparation and property of PVDF/poly(dimethylsiloxane) blending membrane

A Thin Inorganic Composite Separator for Lithium-Ion Batteries

A Novel Composite Microporous Polymer Electrolyte Prepared with Molecule Sieves for Li-ion Batteries

Preparation and Characterization of Safety Pvdf/P(Mma-Co-Pegma) Active Separators by Studying the Liquid Electrolyte Distribution in This Kind of Membrane

Effect of SiO₂ Nanoparticles on the Performance of PVdF-HFP/Ionic Liquid Separator for Lithium-Ion Batteries