Abstract:This paper investigates the concept of pre-combustion carbon capture (Pre-CCS) with a combined cycle gas turbine (CCGT) propulsion system to achieve energy efficient carbon capture onboard a Liquid Natural Gas fuelled vessel. A basic CCGT model with energy efficiency of 51.6 % when using LNG as fuel was integrated with a Pre-CCS system composed of a steam methane reformer, water–gas shift reactors, pressure swing adsorption (SMR-PSA), and liquid CO 2 storage. Various waste heat utilisation schemes integrated with the CCGT-reformer were modelled in Aspen HYSYS. The modelling of the waste heat recovery networks as energy streams integrating between various processes and unit of operations has facilitated a closed-loop simulation of various systems. It was concluded that a proper utilisation of the high-grade heat from the gas turbine (GT) exhaust and from the reformer is crucial to improve the overall energy efficiency and carbon capture rate, exemplified by a scheme where the heating needs for the SMR and the cooling needs from the water–gas-shift reactors are fully integrated. When optimised, the integrated system had an overall energy efficiency of 41.5 % and 43.2 % (i.e. an efficiency loss of 10.2–10.5 percentage points from the base CCGT system) accompanied with specific GHG emission reduction of 51.2 % and 52.3 % for operation of the GT at a turbine entry temperature of 1700 K and 1850 K, respectively. Intermediate levels of reforming, where the GT uses a mix of LNG and reformate gases, were also simulated, showing an almost linear evolution from the 100 % LNG feed to the GT to the 100 % reformate case. Such a strategy could be used for gradual evolution to meet the required CO 2 reduction timeline. It was determined that the 100 % reformate case provides the highest CO 2 capture rate. Estimates of other emissions from the GT assuming typical combustor residence times for the whole range of fuel blends were also carried out, showing that the overall greenhouse gas emission is dominated by CO 2 , given that the GT emits negligible N 2 O and unburnt methane. Some capital cost estimates were also made to determine the unit price of hydrogen fuel produced onboard, suggesting that the CAPEX was not prohibitive. These findings support the pre-combustion CCS − CCGT integrated system as a promising long-term decarbonisation and propulsion strategy to comply with emissions regulations, displaying good performance in terms of cost, energy consumption, and CO 2 reduction. The scalability and adaptability of the proposed system for existing and new-built ships across the decarbonisation timeline is also discussed.

Design and optimization of a cold energy and waste heat utilization system for LNG-powered ships with post-combustion carbon capture

Design and Optimization of a Zero Carbon Emission System Integrated with the Utilization of Marine Engine Waste Heat and LNG Cold Energy for LNG-powered Ships

Techno-economic Analysis on a Hybrid System with Carbon Capture and Energy Storage for Liquefied Natural Gas Cold Energy Utilization

Utilizing waste heat from natural gas engine and LNG cold energy to meet heat-electric-cold demands of carbon capture and storage for ship decarbonization: Design, optimization and 4E analysis

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Novel fuel-efficient cryogenic carbon capture system for the combustion exhaust of LNG-powered ships

Advanced Design and Analysis of BOG Treatment Process in LNG Fueled Ship Combined with Cold Energy Utilization from LNG Gasification

Research on Process of SCV Flue Gas Carbon Capture Based on LNG Cold Energy

Performance of a Novel Waste Heat-Powered Ionic Liquid-Based CO2 Capture and Liquefaction System for Large-Scale Shipping

Performance of a novel waste heat-powered ionic liquid-based CO 2 capture and liquefaction system for large-scale shipping

Construction and Optimization of Liquefied Natural Gas Regasification Cold Energy Comprehensive Utilization System on Floating Storage Regasification Unit

Energy optimization of a non-aqueous solvent CO 2 absorption system with pressure swing regeneration

A combined energy recovery system for comprehensive utilization of both low-grade waste heat and cold energy in LNG

Thermo-economic Analysis and Multi-Objective Optimization of Cryogenic CO2 Capture Systems Based on Liquefied Natural Gas Cold Energy Utilization

Design and Simulation Analysis of Cold Energy Utilization System of LNG Floating Storage Regasification Unit

Energy, exergy and economic benefits deriving from LNG-fired power plant: Cold energy power generation combined with carbon dioxide capture

The Application of Cryogenic Carbon Capture Technology on the Dual-Fuel Ship through the Utilisation of LNG Cold Potential

Onboard pre-combustion carbon capture with combined-cycle gas turbine power plant architectures for LNG-fuelled ship propulsion

Optimization and 4E analysis of integration of waste heat recovery and exhaust gas recirculation for a marine diesel engine to reduce NOx emissions and improve efficiency

Thermodynamic analysis and performance optimization of the supercritical carbon dioxide Brayton cycle combined with the Kalina cycle for waste heat recovery from a marine low-speed diesel engine

A Novel Combined System for LNG Cold Energy Utilization to Capture Carbon Dioxide in the Flue Gas from the Magnesite Processing Industry