Abstract:Background: Isocyanates are highly reactive chemicals used widely in metal structure coating applications in construction. Isocyanates are potent respiratory and skin sensitizers and a leading cause of occupational asthma. At present, there is no cure for isocyanate asthma and no biomarkers of early disease. Exposure reduction is considered the most effective preventive strategy. To date, limited data are available on isocyanate exposures and work practices in construction trades using isocyanates, including metal structure coatings. Objectives: The primary objectives of this work were: i) to characterize isocyanate inhalation and dermal exposures among painters during metal structure coating tasks in construction; and ii) to assess the adequacy of existing work practices and exposure controls via urinary biomonitoring pre- and post-shift. Methods: Exposures to aliphatic isocyanates based on 1,6-hexamethylene diisocyanate (1,6-HDI) and its higher oligomers (biuret, isocyanurate and uretdione) were measured among 30 workers performing painting of bridges and other metal structures in several construction sites in the Northeastern USA. Exposure assessment included simultaneous measurement of personal inhalation exposures (n = 20), dermal exposures (n = 22) and body burden via urinary biomonitoring pre- and post-shift (n = 53). Contextual information was collected about tasks, processes, materials, work practices, personal protective equipment (PPEs) and exposure controls, work histories, and environmental conditions. Results: Breathing zone concentrations were the highest for biuret (median, 18.4 μg/m3), followed by 1,6-HDI monomer (median, 3.5 μg/m3), isocyanurate (median, 3.4 μg/m3) and uretdione (median, 1.7 μg/m3). The highest exposures, measured during painting inside an enclosed bridge on a hot summer day, were: 10,288 μg/m3 uretdione; 8,240 μg/m3 biuret; and 947 μg/m3 1,6-HDI. Twenty percent of samples were above the NIOSH ceiling exposure limit for 1,6- HDI (140 μg/m3) and 35% of samples were above the UK-HSE ceiling for total isocyanate group (70 μg NCO/m3). Isocyanate loading on the gloves was generally high, with a median of 129 μg biuret/pair and maximum of 60.8 mg biuret/pair. The most frequently used PPEs in the workplace were half-face organic vapor cartridge (OVC) respirators, disposable palmar dip-coated polymer gloves, and cotton coveralls. However, 32% of workers didn't wear any respirator, 47% wore standard clothing with short-sleeve shirts and 14% didn't wear any gloves while performing tasks involving isocyanates. Based on biomonitoring results, 58.4% of urine samples exceeded the biological monitoring guidance value (BMGV) of 1 μmol hexamethylene diamine (HDA)/mol creatinine. Post-shift geometric mean HDA normalized to specific gravity increased by 2.5-fold compared to pre-shift (GM, 4.7 vs. 1.9 ng/mL; p value, < 0.001), and only 1.4-fold when normalized to creatinine. Conclusions: Exposure and biomonitoring results, coupled with field observations, support the overall conclusions that (i) substantial inhalation and dermal exposures to aliphatic isocyanates occur during industrial coating applications in construction trades; that (ii) the current work practices and exposure controls are not adequately protective. High urinary creatinine values in the majority of workers, coupled with significant cross-shift increases and filed observations, point to the need for further investigations on possible combined effects of heat stress, dehydration, and nutritional deficiencies on kidney toxicity. Implementation of comprehensive exposure control programs and increased awareness are warranted in order to reduce isocyanate exposures and associated health risks among this cohort of construction workers.

232 The hunt for the mysterious isocyanic acid

A survey of airborne isocyanate exposure in 13 Swedish polyurethane industries

The stability and generation pattern of thermally formed isocyanic acid (ICA) in air - potential and limitations of proton transfer reaction-mass spectrometry (PTR-MS) for real-time workroom atmosphere measurements

Determining the Exposure Routes and Risk Assessment of Isocyanates in Indoor Environments

[New data on occupational exposure to isocyanates]

Calibration of Hydroxyacetonitrile (HOCH2CN) and Methyl isocyanate (CH3NCO) Isomers using I- Chemical Ionization Mass Spectrometry (CIMS)

Biomarker Analysis of Hemoglobin Adducts of Acrylamide and Glycidamide Enantiomers for Mid-Term Internal Exposure Assessment by Isotope Dilution Ultra-High Performance Liquid Chromatography Tandem Mass Spectrometry.

Polyisocyanates in Occupational Environments: A Critical Review of Exposure Limits and Metrics

Exposures and urinary biomonitoring of aliphatic isocyanates in construction metal structure coating

"Isocyanates and isocyanides - life-threatening toxins or essential compounds?"

An FTIR Investigation of Isocyanate Skin Absorption Using in Vitro Guinea Pig Skin.

Fast Sensing of Hydrogen Cyanide (HCN) Vapors Using a Hand-Held Ion Mobility Spectrometer with Nonradioactive Ionization Source

Skin Exposure to Isocyanates: Reasons for Concern

Emission of methylene diphenyl diisocyanate and methylene dianiline during use of cure-in-place methylene diphenyl diisocyanate-based consumer products

High Concentrations of Atmospheric Isocyanic Acid (HNCO) Produced from Secondary Sources in China

Toluene diisocyanate occupational exposure data in the polyurethane industry (2005–2020): A descriptive summary from an industrial hygiene perspective

Nine years of patch testing with isocyanates in a clinic of occupational dermatology

Polychlorinated alkanes in indoor environment: A review of levels, sources, exposure, and health implications for chlorinated paraffin mixtures

The Simplest, Isolable, Alkynyl Isocyanate HC≡CNCO: Synthesis and Characterization.

Analytical chemistry of carbonyl compounds in indoor air

First detection of C$_2$H$_5$NCO in the ISM and search of other isocyanates towards the G+0.693-0.027 molecular cloud