Abstract:Recent developments indicate that the application of pultruded FRP profiles has been continuously growing in the construction industry. Generating more complex structures composed of pultruded FRP profiles requires joining them. In particular, I-shape glass fiber pultruded profiles are commonly used and the possible joints to connect them should be specifically studied. The mechanical behavior of adhesively and bolted joints for pultruded Glass FRP (GFRP) profiles has been experimentally addressed and numerically modeled. A total of nine specimens with different configurations (bolted joints, adhesive joints, web joints, web and flange joints, and two different angles between profiles) were fabricated and tested, extending the available published information. The novelty of the research is in the direct comparison of joint technologies (bolted vs. adhesive), joint configuration (web vs. flange + web) and angles between profiles in a comprehensive way. Plates for flange joints were fabricated with carbon fiber FRP. Experimental results indicate that adding the bolted flange connection allowed for a slight increase of the load bearing capacity (up to 15%) but a significant increase in the stiffness (between 2 and 7 times). Hence, it is concluded that using carbon FRP bolted flange connection should be considered when increasing the joint stiffness is sought. Adhesively connections only reached 25% of the expected shear strength according to the adhesive producer if comparing the numerically calculated shear strength at the failure time with the shear strength capacity of the adhesive. Apart from assessing adhesive connections, the implemented 3D numerical model was aimed at providing a simplified effective tool to effectively design bolted joints. Although the accurate fitting between experimental and numerical results of the mechanical response, especially the stiffness of the joint, the local failure experimentally observed was not automatically represented by the model, because of the simplified definition of the materials oriented to make the model available for a wide range of practitioners.

Strengthening of glass fiber sheets for multi-bolted pultruded GFRP connections: Effects of connection type and bolt-tightening force

Experimental Study on Dynamic Behavior of GFRP-to-concrete Interface

Mechanical Behavior of Glued-in GFRP Rod in Glubam: Experimental and Analytical Study

Experimental Studies on Bolted Glubam Connections

Pull-Out Behavior of CFRP Bars in Glued-In Glubam Joints

Mechanical Behavior of Loose High-Strength Bolted Connections with Thin Sheet Steels

Experimental and Numerical Investigation of Joints for a Pultruded Fiber-Reinforced Polymer Truss

Comparative Study on Static and Fatigue Performances of Pultruded GFRP Joints Using Ordinary and Blind Bolts

Experimental and Numerical Study of Adhesively and Bolted Connections of Pultruded GFRP I-Shape Profiles

Behavior of hybrid bonded/bolted GFRP single-lap joint under static tensile loading: An experimental and numerical study

Experimental and numerical investigation on failure behavior of hybrid bonded/bolted GFRP single-lap joints under static shear loading

Quasi-plastic flexural behavior of adhesive-bolt hybrid connection for large scale pultruded GFRP frame

Buckling Analysis of Pultruded Glass Fiber Reinforced Polymer (GFRP) Angle Sections

Experimental study for the effect of hole notched in fracture mechanics of GLARE and GFRP composites subjected to quasi-static loading

Damage tolerance of adhesively bonded pultruded GFRP double-strap joints

EXPERIMENTAL STUDY ON MECHANICS PERFORMANCE OF GFRP TUBE ANTI-BUCKLING STRENGTHENING ANGLE STEEL MEMBERS

GFRP reinforced high performance glass–bolted joints: Development of a simplified finite element-based method for analysis

FIELD TEST ON LOAD-BEARING CHARACTER OF GLASS FIBER REINFORCED POLYMER BOLT

Experimental Study on Bond Performance of Carbon- and Glass-Fiber Reinforced Polymer (CFRP/GFRP) Bars and Steel Strands to Concrete

Group effect of GFRP-timber bolted connections in tension

Experimental study and finite element analysis on the joining performance of GF/PP rivets