Abstract:The information required for construction quantities surveying is not only generated by various participants in different construction phases but also stored in different forms including graphics, text, tables, or various combinations of the three. To report a bill of quantities (BOQ), the project manager has to continuously excerpt information from various resources and record it on papers. Without adequate staff and time, this repetitive and tedious process is difficult for the project manager to handle properly and thus reduces the effectiveness and the accuracy of the quantities surveying process which creates problems during the design, tender, and construction supervision of construction projects for designers and contractors practicing because receipts are based upon actual quantities, such variations have an obvious impact on the contractor’s cash flow, once the actual quantities frequently vary from the estimated quantities listed in the BOQ. Hence, automation quantity surveying system has been developed by using GIS to extract the data required for the quantity of different components of any construction project from AutoCAD drawings (spatial data), to report a BOQ after querying, manipulation, and analyzing these data. The system has been implemented on the construction project of Al khawarizmy College at Baghdad University in Baghdad. The main results of using this system are automatic generation a bill of quantity (BOQ) directly from design drawing, with overcome to design changing, accurate, fast, and effective method for estimating the quantities, fewer errors in cost estimating, and better documentation for continuously reusing information in all construction phases. The accuracy of GIS quantities had been proved by comparing these quantities with the quantities of site surveying. Then determining the accuracy percentage (A%) of GIS quantities which equals (98.85%), and the regression line that equals 0.999. These values mean; there are big correlation between the estimated quantities by GIS and the quantities of site surveying.

Establishing A Three-Dimensional Geodetic Point Network Inside the University of Technology, Iraq - Baghdad

Combined Adjustment Project of National Astronomical Geodetic Networks and 2000' National GPS Control Network*

Planning, emphasis and proposal for implementation of gravimetric control network in Israel

Investigation of Stability of Precise Geodetic Instruments Used in Deformation Monitoring

Construction of precise three-dimensional engineering control network with total station and laser tracker

Evaluation of the Performance of Online GPS/GNSS Data Processing Services for Monitoring the Land Deformations and Movements

Application of Geographic Information System for Preparing the Bill of Quantities of Construction Projects

Application of GIS technologies in the improvement of geodetic and cartographic works in land cadastre

Application of GIS to assess the accessibility of urban streets in Baghdad city

Geospatial Information System Establishment Based on Digital Photogrammetry and High Resolution Remote Sensing Image

Implementation in monitoring of an UiTM building by using [GNSS] & total station to ensure the safety of future geomatic laboratory / Farah Atiqah Kamil

Application of RTK GPS Network in Cadastral Surveys

Documentation of construction project using integration of BIM and GIS technique

Geodetic control extension at erosion prone areas using integrated CORS-GNSS in Benin City, Edo State Nigeria

GIS-based Smart Campus System using 3D Modeling

Spatial coordinate autonomous establishment technique for high-precision local positioning system

Remote Sensing and GIS Techniques in Monitoring Land Use Land Cover Change

New Approach for Earthquake/tsunami Monitoring Using Dense GPS Networks.

A Railway Track Geometry Measuring Trolley System Based On Aided Ins

Simulate High Traffic and Effective Cost an Academic Kurdistan Network Based on DWDM using OPNET

Assessing the accuracy of online GNSS processing services and commercial software on short baselines