Abstract:A microneedle (MN) array is a novel biomedical device adopted in medical applications to pierce through the stratum corneum while targeting the viable epidermis and dermis layers of the skin. Owing to their micron-scale dimensions, MNs can minimize stimulations of the sensory nerve fibers in the dermis layer. For medical applications, such as wound healing, biosensing, and drug delivery, the structure of MNs significantly influences their mechanical properties. Among the various microfabrication methods for MNs, fused deposition modeling (FDM), a commercial 3D printing method, shows potential in terms of the biocompatibility of the printed material (polylactic acid (PLA)) and preprogrammable arbitrary shapes. Owing to the current limitations of FDM printer resolution, conventional micron-scale MN structures cannot be fabricated without a post-fabrication process. Hydrolysis in an alkaline solution is a feasible approach for reducing the size of PLA needles printed via FDM. Moreover, weak bonding between PLA layers during additive manufacturing triggers the detachment of PLA needles before etching to the expected sizes. Furthermore, various parameters for the fabrication of PLA MNs with FDM have yet to be sufficiently optimized. In this study, the thermal parameters of the FDM printing process, including the nozzle and printing stage temperatures, were investigated to bolster the interfacial bonding between PLA layers. Reinforced bonding was demonstrated to address the detachment challenges faced by PLA MNs during the chemical etching process. Furthermore, chemical etching parameters, including the etchant concentration, environmental temperature, and stirring speed of the etchant, were studied to determine the optimal etching ratio. To develop a universal methodology for the batch fabrication of biodegradable MNs, this study is expected to optimize the conditions of the FDM-based fabrication process. Additive manufacturing was employed to produce MNs with preprogrammed structures. Inclined MNs were successfully fabricated by FDM printing with chemical etching. This geometrical structure can be adopted to enhance adhesion to the skin layer. Our study provides a useful method for fabricating MN structures for various biomedical applications.

FDM printing of microneedles based on biocompatible and biodegradable thermoplastic polymers

Assessment of fused deposition modeling (FDM) parameters for fabrication of solid and hollow microneedles using polylactic acid (PLA)

Optimization of the fused deposition modeling-based fabrication process for polylactic acid microneedles

3D Printing of Biodegradable Polymeric Microneedles for Transdermal Drug Delivery Applications

A novel and biocompatible photopolymerizable resin based on cyclohexanedimethanol‐dimetacrylate designed to light‐print microneedles

3D printing redefines microneedle fabrication for transdermal drug delivery

Facile fabrication of degradable, serrated polyethylene diacrylate microneedles using stereolithography

Design and fabrication of customizable microneedles enabled by 3D printing for biomedical applications

Design, Development, and Testing of Polymeric Microblades: A Novel Design of Microneedles for Biomedical Applications

Determination of vat-photopolymerization parameters for microneedles fabrication and characterization of HPMC/PVP K90 dissolving microneedles utilizing 3D-printed mold

Low-cost fabrication of digital light processing 3D printed conical microneedles for biomedical applications

Micromolding of Amphotericin-B-Loaded Methoxyethylene-Maleic Anhydride Copolymer Microneedles

Leveraging novel innovative thermoresponsive polymers in microneedles for targeted intradermal deposition

Fabrication Methods of Microneedles with Polymeric Materials

Preparation and characterization of 3D printed PLA microneedle arrays for prolonged transdermal drug delivery of estradiol valerate

Optimizing polymethyl methacrylate (PMMA)-based stretchable microneedle arrays by vat photopolymerization for efficient drug loading

An overview on the advantages and limitations of 3D printing of microneedles

A Review of 3D-Printing of Microneedles

Producing Hollow Polymer Microneedles Using Laser Ablated Molds in an Injection Molding Process

Toward high-resolution 3D-printing of pharmaceutical implants - A holistic analysis of relevant material properties and process parameters

3D Printing—A “Touch-Button” Approach to Manufacture Microneedles for Transdermal Drug Delivery