Abstract:An accurate description of the formability and failure behavior of sheet metal materials is essential for an optimal forming process design. In this respect, the forming limit curve (FLC) based on the Nakajima test, which is determined in accordance with DIN EN ISO 12004-2, is a wide-spread procedure for evaluating the formability of sheet metal materials. Thereby the FLC is affected by influences originating from intrinsic factors of the Nakajima test-setup, such as friction, which leads to deviations from the linear strain path, biaxial prestress and bending superposition. These disadvantages can be circumvented by an alternative test combination of uniaxial tensile test and hydraulic bulge test. In addition, the forming limit capacity of many lightweight materials is underestimated using the cross-section method according to DIN EN ISO 12004-2, due to the material-dependent occurrence of multiple strain maxima during forming or sudden cracking without prior necking. In this regard, machine learning approaches have a high potential for a more accurate determination of the forming limit curve due to the inclusion of other parameters influencing formability. This work presents a machine learning approach focused on uniaxial tensile tests to define the forming limit of lightweight materials and high-strength steels. The transferability of an existing weakly supervised convolutional neural network (CNN) approach was examined, originally designed for Nakajima tests, to uniaxial tensile tests. Additionally, a stereo camera-based method for this purpose was developed. In our evaluation, we train and test materials, including AA6016, DX54D, and DP800, through iterative data composition, using cross-validation. In the context of our stereo camera-based approach, strains for different materials and thicknesses were predicted. In this cases, our method successfully predicted the major strains with close agreement to ISO standards. For DX54D, with a thickness of 0.8 mm, the prediction was 0.659 (compared to ISO's 0.664). Similarly, for DX54D, 2.0 mm thickness, the predicted major strain was 0.780 (compared to ISO 0.705), and for AA6016, at 1.0 mm thickness, a major strain of 0.314 (in line with ISO 0.309) was estimated. However, for DP800 with a thickness of 1.0 mm, the prediction yielded a major strain of 0.478 (as compared to ISO 0.289), indicating a divergence from the ISO standard in this particular case. These results in general, generated with the CNN stereo camera-based approach, underline the quantitative alignment of the approach with the cross-section method.

Modelling stress-strain curves and forming limit curves using deep learning

Unsupervised Deep Learning for Advanced Forming Limit Analysis in Sheet Metal: A Tensile Test-Based Approach

Multi-scale Modelling of Evolving Plastic Anisotropy During Al-alloy Sheet Forming

Application of Machine Learning to Bending Processes and Material Identification

Application of machine learning-based algorithms to predict the stress-strain curves of additively manufactured mild steel out of its microstructural characteristics

Modeling and Analysis of the Plastic Flow Curves of a Duplex Stainless Steel Using Artificial Intelligence

Virtual Laboratory Enabled Constitutive Modelling of Dual Phase Steels

An Experimental and Theoretical Study on Constitutive Model of Al-2024T4 for Sheet Metal Incremental Forming

Prediction of defects in deep drawn rectangular parts using Finite Element Analysis (FEA) and Response Surface Methodology (RSM)

Application Of A New Semi-Empirical Model For Forming Limit Prediction Of Sheet Material Including Superposed Loads Of Bending And Shearing

Deep Learning in Sheet Metal Bending With a Novel Theory-Guided Deep Neural Network

Analysis of Forming Limits in Sheet Metal Forming with Pattern Recognition Methods. Part 1: Characterization of Onset of Necking and Expert Evaluation

Numerical Modeling and Deformation Analysis for Electromagnetically Assisted Deep Drawing of AA5052 Sheet

Numerical prediction and experimental validation of forming limit curves of laminated half-hard aluminum sheets

Deep learning prediction of stress fields in additively manufactured metals with intricate defect networks

Implementation of finite element analysis for solving the constraints in forming process of large steel parts

Gathering of Process Data through Numerical Simulation for the Application of Machine Learning Prognosis Algorithms

Deep alloys: Metal materials empowered by deep learning

Failure Prediction in Bulk Metal Forming Process

The Use of Machine-Learning Techniques in Material Constitutive Modelling for Metal Forming Processes

Forming process prediction of a self-piercing riveted joint in carbon fibre reinforced composites and aluminium alloy based on deep learning