Abstract:The Atmospheric Radionuclide Transport Model (ARTM) operates at the meso- γ scale and simulates the dispersion of radionuclides originating from nuclear facilities under routine operation within the planetary boundary layer. This study presents the extension and validation of this Lagrangian particle dispersion model and consists of three parts: (i) a sensitivity study that aims to assess the impact of key input parameters on the simulation results, (ii) the evaluation of the mixing properties of five different turbulence models using the well-mixed criterion, and (iii) a comparison of model results to airborne observations of carbon dioxide ( CO 2 ) emissions from a power plant and the evaluation of related uncertainties. In the sensitivity study, we analyse the effects of the stability class, roughness length, zero-plane displacement factor, and source height on the three-dimensional plume extent as well as the distance between the source and maximum concentration at the ground. The results show that the stability class is the most sensitive input parameter as expected. The five turbulence models are the default turbulence models of ARTM 2.8.0 and ARTM 3.0.0, one alternative built-in turbulence model of ARTM, and two further turbulence models implemented for this study. The well-mixed condition tests showed that all five turbulence models are able to preserve an initially well-mixed atmospheric boundary layer reasonably well. The models deviate only 6 % from the expected uniform concentration below 80 % of the mixing layer height, except for the default turbulence model of ARTM 3.0.0 with deviations of up to 18 %. CO 2 observations along a flight path in the vicinity of the lignite power plant Bełchatów, Poland, measured by the Deutsches Zentrum für Luft- und Raumfahrt (DLR) Cessna aircraft during the Carbon Dioxide and Methane Mission (CoMet) campaign in 2018 allowed for evaluation of model performance for the different turbulence models under unstable boundary layer conditions. All simulated mixing ratios are of the same order of magnitude as the airborne in situ data. An extensive uncertainty analysis using probability distribution functions, statistical tests, and direct spatio-temporal comparisons of measurements and model results help to quantify the model uncertainties. With the default turbulence setups of ARTM versions 2.8.0 and 3.0.0, the plume widths are underestimated by up to 50 %, resulting in a strong overestimation of the maximum plume CO 2 mixing ratios. The comparison of the three alternative turbulence models shows good agreement of the peak plume CO 2 concentrations, the CO 2 distribution within the plumes, and the plume width, with a 30 % deviation in the peak CO 2 concentration and a less than 25 % deviation in the measured CO 2 plume width. Uncertainties in the simulations may arise from the different spatial and temporal resolutions of simulations and measurements in addition to the turbulence parametrisation and boundary conditions. The results of this work may help to improve the accurate representation of real plumes in very unstable atmospheric conditions through the selection of distinct turbulence models. Further comparisons at different stability regimes are required for a final assessment of model uncertainties.

Updating the radiation infrastructure in MESSy (based on MESSy version 2.55)

Development of aerosol optical properties for improving the MESSy photolysis module in the GEM-MACH v2.4 air quality model and application for calculating photolysis rates in a biomass burning plume

Response to Referee Comments

The fully coupled regionally refined model of E3SM version 2: overview of the atmosphere, land, and river results

SCIATRAN software package (V4.6): update and further development of aerosol, clouds, surface reflectance databases and models

NRLMSIS 2.0: A whole‐atmosphere empirical model of temperature and neutral species densities

A grid of self-consistent MSG (MARCS-StaticWeather-GGchem) cool stellar, sub-stellar, and exoplanetary model atmospheres

Twelve Times Faster yet Accurate: A New State‐Of‐The‐Art in Radiation Schemes via Performance and Spectral Optimization

NRLMSISE-00 empirical model of the atmosphere: Statistical comparisons and scientific issues

MPI-AMRVAC 3.0: updates to an open-source simulation framework

How non-equilibrium aerosol chemistry impacts particle acidity: the GMXe AERosol CHEMistry (GMXe–AERCHEM, v1.0) sub-submodel of MESSy

Harmonized Emissions Component (HEMCO) 3.0 As a Versatile Emissions Component for Atmospheric Models: Application in the GEOS-Chem, NASA GEOS, WRF-GC, CESM2, NOAA GEFS-Aerosol, and NOAA UFS Models

A simple and realistic aerosol emission approach for use in the Thompson–Eidhammer microphysics scheme in the NOAA UFS Weather Model (version GSL global-24Feb2022)

M3DIS -- A grid of 3D radiation-hydrodynamics stellar atmosphere models for stellar surveys

M3DIS - A grid of 3D radiation-hydrodynamics stellar atmosphere models for stellar surveys. I. Procedure, validation, and the Sun

(ESMAC Diags) Version 1: Assessing E3SM Aerosol Predictions

Better calibration of cloud parameterizations and subgrid effects increases the fidelity of the E3SM Atmosphere Model version 1

The Aerosol Module in the Community Radiative Transfer Model (v2.2 and v2.3): accounting for aerosol transmittance effects on the radiance observation operator

Modules for Experiments in Stellar Astrophysics (MESA): Time-dependent Convection, Energy Conservation, Automatic Differentiation, and Infrastructure

Implementation of the ISORROPIA-lite aerosol thermodynamics model into the EMAC chemistry climate model (based on MESSy v2.55): implications for aerosol composition and acidity

The Lagrangian Atmospheric Radionuclide Transport Model (ARTM) – sensitivity studies and evaluation using airborne measurements of power plant emissions