Abstract:Publication date: 22 July 2022 Source: Key Engineering Materials Vol. 926 Author(s): Christian Strobl, Paul Alexander Vogel, Anh Tuan Vu, Hendrik Mende, Tim Grunwald, Robert H. Schmitt, Thomas Bergs Numerous optical applications have rising demands for ever increasing quantities from lighting and projection optics for modern vehicles to home or street lighting using LED technology. Glass is the material of choice for most of those application fields. It has several advantages over polymers, including heat and scratch resistance as well as longevity and recyclability. Non-isothermal glass molding has become a viable hot forming technology for mass production of optics. The major challenge is enabling a scalable replication process allowing the optical glass elements to be manufactured with high form accuracy and at low-cost production with low reject rates. This work introduces recent developments in glass optics manufacturing that allow the fulfilment of seemingly contradicting criteria: the economic growth and the need for less consumption of resources and energy. While single cavity non-isothermal molding is state-of-the-art, a manufacturing innovation through wafer-scale molding enables an exponentially increasing number of optics to be produced per production shift, allowing a significant reduction of unit costs. In parallel, as multiple optics are produced in one manufacturing cycle, the energy consumption and the consequent CO2 emission can be reduced. In contrast, the technological development arises several challenges that will be discussed in this work. Besides the selection of suitable mold concepts and materials, the challenges also include the temperature control of the mold and the blank up to the optimization of flow and shrinking mechanisms of the glass during rapid forming. Another difficulty in the non-isothermal glass molding is to maintain the low form deviation required for precision optics, repeatability, and low failure rates through process optimization. Finally, detail calculations of cost, energy and CO2 consumption, in comparison with conventional fabrication of glass components using grinding and polishing as well as single cavity molding, will be demonstrated. The non-isothermal wafer-level glass molding is a new technological solution for the sustainable manufacturing of optics at large-scaled production.

Review on Fabrication Technologies for Optical Mold Inserts

Injection molding of high-precision optical lenses: A review

Micro Aspheric Glass Lens Molding Process

A review of the techniques for the mold manufacturing of micro/nanostructures for precision glass molding

The Use of Additive Manufacturing Techniques in the Development of Polymeric Molds: A Review

A Comprehensive Review of Micro/Nano Precision Glass Molding Molds and Their Fabrication Methods

Fabrication of Polymer Microfluidics: An Overview

Precision glass molding: Toward an optimal fabrication of optical lenses

Micro-nanostructured polymer surfaces using injection molding: A review

Recent advancements in optical microstructure fabrication through glass molding process

Evaluation of mold materials for precision glass molding

Study of Injection Molding Process to Improve Geometrical Quality of Thick-Walled Polycarbonate Optical Lenses by Reducing Sink Marks

Study on Preparation of Microstructured Optical Membrane

The Additive Manufacturing Approach to Polydimethylsiloxane (PDMS) Microfluidic Devices: Review and Future Directions

A review of recent advances in fabrication of optical Fresnel lenses

Enabling Sustainability in Glass Optics Manufacturing by Wafer Scale Molding

Recent Advances in Polymer Science and Fabrication Processes for Enhanced Microfluidic Applications: An Overview

A comprehensive review of theory and technology of glass molding process

Cost-effective fabrication of photopolymer molds with multi-level microstructures for PDMS microfluidic device manufacture

Review of small aspheric glass lens molding technologies