Abstract:The emerging photovoltaic technology, namely perovskite photovoltaics, follows a style to the blooming flower with superficial prosperity described by the ancient poet Yuxi Liu. Metal-halide perovskite has become one of the most promising photovoltaic materials for thin-film solar-cell applications, mainly due to its exellent visible light capture capability, large diffusion coefficients and long diffusion lengths of charge carriers (both electrons and holes). The reported power conversion efficiency of laboratory produced perovskite solar cells (PSCs) has exceeded 25%. However, this value was only achieved for devices of less than 0.1 cm(2)dimensions, and decreases significantly with the increase in area (for example, down to 11.6% for a device area of similar to 800 cm(2), showing the issues with the scalability). In PSCs, the electron transport layer (ETL) has to perform two essential functions, which are related: (i) to collect and transfer charges after the injection of electrons from the perovskite light harvester; and (ii) to block the backflow of holes, thus realizing effective charge separation and suppressing charge carrier recombination. However, there are several critical issues associated with the ETLs which limit the further development of the PSCs. For example, the experimentally obtained open-circuit voltages in PSCs are typically much lower compared to the theoretical voltage limit with their optical bandgaps between 1.59 and 1.63 eV. This is mainly attributed to inefficient charge transport in the PSCs due to inhomogeneous charge accumulation and serious interfacial recombination at the interfaces between the ETL and the perovskite active layer. We scan recent developments of ETLs in PSCs, and discuss design methodologies, mechanisms, processing and characterization of new types of ETLs. High power conversion efficiency with large open-circuit voltages/photo-currents could be achieved through designing materials and microstructures for high-quality ETLs with a high electron mobility, high electrical conductivity and pinhole-free film morphology. It is crucial to balance the charge diffusion processes in the respective charge collective layers of PSCs as the interfaces between the ETLs and perovskites along with their interfacial structures play key roles in achieving new solid-state mesoscopic solar cells optimized open circuit voltages and output photocurrents.

Enhancing Electron Transport through Metal Oxide Adjustments in Perovskite Solar Cells and Their Suitability for X-ray Detection

Metal Organic Framework Doped Spiro-OMeTAD with Increased Conductivity for Improving Perovskite Solar Cell Performance

Magnesium-Doped Zinc Oxide As Electron Selective Contact Layers for Efficient Perovskite Solar Cells

Investigation of Structural, Morphological, and Optical Properties of Novel Electrospun Mg-Doped TiO2 Nanofibers as an Electron Transport Material for Perovskite Solar Cells

Metal oxide alternatives for efficient electron transport in perovskite solar cells: beyond TiO<sub>2</sub>and SnO<sub>2</sub>

Multifunctional MgO Layer in Perovskite Solar Cells

Enhancement of Electron Transport Characteristics Using MXene-MnFeO3 Nanocomposite Integration with Fullerene Derivatives for the Perovskite-Based Solar Cells and Detectors

To Be Higher and Stronger-Metal Oxide Electron Transport Materials for Perovskite Solar Cells

Mg Doped CuCrO2 As Efficient Hole Transport Layers for Organic and Perovskite Solar Cells

Oxygen Vacancy Management for High‐Temperature Mesoporous SnO2 Electron Transport Layers in Printable Perovskite Solar Cells

Heterovalent Samarium Cation‐Doped SnO2 Electron Transport Layer for High‐Efficiency Planar Perovskite Solar Cells

Enhanced Performance for Planar Perovskite Solar Cells with Samarium-Doped TiO2 Compact Electron Transport Layers

Synergistical Transition Metal Ion Co-Doping and Multiple Functional Additive Passivation for Realizing 25.30% Efficiency Perovskite Solar Cells

Metal-Doped TiO2 Thin Film as an Electron Transfer Layer for Perovskite Solar Cells: A Review

Unveiling the Critical Role of Oxidants and Additives in Doped Spiro-OMeTAD toward Stable and Efficient Perovskite Solar Cells

Advances in design engineering and merits of electron transporting layers in perovskite solar cells

Recent Advances in Metal Oxide Electron Transport Layers for Enhancing the Performance of Perovskite Solar Cells

Multi-functional MXene quantum dots enhance the quality of perovskite polycrystalline films and charge transport for solar cells

Multi-cation hybrid stannic oxide electron transport layer for high-efficiency perovskite solar cells

Iodine-doped g-C3N4 modified zinc titanate electron transporting layer for highly efficient perovskite solar cells

Enhanced performance of perovskite solar cells using ZnO electron transport layer prepared under simultaneous UV irradiation and magnetic field