Abstract:Aggressive salts contained in formation waters accelerate the processes of corrosion and salt deposition in oilfield equipment, which leads to unforeseen accidents, contamination of soil and groundwater with harmful substances, as a result of which the ecological balance of the environment is disrupted. Corrosion and scaling that occur during oil production create difficulties during the operation of wells, and, consequently, increase the cost of produced oil.This article covers the results of studies concerning two compositions developed from technical phosphatide - an emulsion obtained by hydration of vegetable oils, as well as sodium hexametaphosphate, ammophos and polypropylene glycol bottoms. When vegetable oils are treated with water and steam (hydration process), the phospholipids contained in the oils combine with water and are released in the form of precipitates called phosphatide emulsions. Such emulsions consist of 45–75 % water, and the rest is phospholipids in the vegetable oil sediment.Technical phosphatides are a group of esters that contain a phosphoric acid residue associated with an amino alcohol. They are natural surfactants and are non-toxic.Preliminary studies have shown that each of the chemical compounds included in the developed reagents has certain inhibitory properties, but when formulated, these compounds provide a synergistic effect.Based on the results of laboratory studies, it was found that at an optimal concentration of reagents of 200 mg/l, the developed compositions provide protection of equipment from corrosion destruction by 94–95 %, and from scaling by 87–88 %. The developed mixed-type inhibitors at optimal concentrations equally effectively inhibit both cathodic and anodic processes on the electrode.The use of these inhibitors leads to the prevention of steel corrosion in the two-phase oil-electrolyte system, as well as to a significant reduction in the rate of scaling.The proposed new compositions can be used in oil wells and in-field transport systems, as well as in reservoir pressure maintenance systems to protect against corrosion and scale deposits.Field tests of the corrosion inhibitor were carried out in deep pumping wells at the Bibieybatneft oil and gas production department. Tests have shown that as a result of using the inhibitor, the protective effect at a concentration of 200 mg/l was 89–90 %, and the effect of salt deposition was 70 %.

Application of Sodium Methyl Ester Sulfonate Anionic Surfactants as Corrosion Inhibitors for Carbon Steel in Oilfield Injection Water

Synthesis, characterization and evaluation of some anionic surfactants with phosphate group as a biodegradable corrosion inhibitor for carbon steel in acidic solution

Novel Natural Surfactant-Based Fatty Acids and Their Corrosion-Inhibitive Characteristics for Carbon Steel-Induced Sweet Corrosion: Detailed Practical and Computational Explorations

Anticorrosion Effect of Ethoxylate Sulfanilamide Compounds on Carbon Steel in 1 M Hydrochloric Acid: Electrochemical and Theoretical Studies

ρ-Substituted imine cationic surfactants as carbon steel corrosion inhibitors: Experimental and theoretical (DFT and MCs) approaches

Theoretical and electrochemical evaluation of tetra-cationic surfactant as corrosion inhibitor for carbon steel in 1 M HCl

An Eco-Friendly Quaternary Ammonium Salt as a Corrosion Inhibitor for Carbon Steel in 5 M HCl Solution: Theoretical and Experimental Investigation

Anionic Surfactant as a Corrosion Inhibitor for Synthesized Ferrous Alloy in Acidic Solution

Some New Synthesized Gemini Cationic Surfactants as Corrosion Inhibitors for Carbon Steel in Hydrochloric Acid Solution

Novel Anionic 4-Tert-Octyl Phenol Ethoxylate Phosphate Surfactant as Corrosion Inhibitor for C-steel in Acidic Media

Synthesis of Novel Nano-Sulfonamide Metal-Based Corrosion Inhibitor Surfactants

Synthesis and Characterization of a Novel Nonionic Gemini Surfactant as Corrosion Inhibitor for Carbon Steel in Acidic Solution

Biodegradable polysaccharide grafted polyacrylamide inhibitor for corrosion in CO2- saturated saline solution

Experimental and theoretical simulations to examine the influence of nonionic surfactant on the corrosion control of mild steel in hydrochloric acid

A study of the inhibitive effect for corrosion of steel in 1.0 M HCl using a new nonionic surfactant based on coumarin moiety: chemical, electrochemical and quantum mechanics calculations

Synergism of alkylbenzene sulfonate and cetyltrimethylammonium bromide on corrosion inhibition of carbon steel in CO2 -saturated solutions

Effect of oil displacement agent on corrosion behavior of NaCl - Alkali/ surfactant/ polymer flooding pipeline steel

Eco-Friendly Plant Extract of Medicago sativa (Alfalfa) as Corrosion Inhibitor for Carbon Steel in Marine Environment

Electrochemical and Theoretical Study of Corrosion Inhibition on Carbon Steel in 1M HCl Medium by 1,10-Bis(4-Amino-3-Methyl-1,2,4-Triazole-5-Thioyl)Decane

STUDYING THE INFLUENCE OF NEW COMBINED INHIBITORS ON THE PROCESSES OF CORROSION AND SALT DEPOSITION IN OIL-FIELD EQUIPMENT

Effect of anionic surfactants as pitting corrosion inhibitors for stainless steels