Abstract:The Space Propulsion Laboratory (SPL) of the Massachusetts Institute of Technology (MIT) is developing the Ion Electrospray Propulsion System (iEPS), designed to address a current need in CubeSat technology: miniaturized electric thrusters. These could be used for different applications, ranging from attitude control to interplanetary flights. In this work, performed together with the Space Systems Laboratory of the Costa Rica Institute of Technology (SETEC Lab), we explore a case study in which the iEPS is used for constellation management in Low Earth Orbit (LEO) when integrated in a 3U CubeSat. We analyze how a 180° separation in the Right Ascension of the Ascending Node (RAAN) between two CubeSats (SatA and SatB) starting in the same orbit can be achieved by modifying one of the spacecraft's orbital altitude, resulting in a difference in their rate of nodal precession (defined as the drift rate) due to the J 2 effect, and therefore a difference in their relative RAAN. The method consists of SatB increasing its semi-major axis, drifting in a higher orbit with a lower drift rate, and returning to the original semi-major axis once the desired difference in RAAN in achieved relative to the other spacecraft. SatA will stay in its original orbit, using its thruster to compensate for orbital energy loss due to atmospheric drag, therefore demonstrating another application of iEPS for constellation management. Three different simulations were studied, defined as the minimum time trajectory, minimum propellant trajectory and a hybrid trajectory, consisting of reaching a higher altitude orbit, but actively changing the RAAN using the propulsion system instead of drifting. It was observed that the difference in this orbital element could be achieved using 85 g of propellant in as little as 164 days for the minimum time trajectory. The same difference could also be achieved using only 44 g of propellant in 245 days for the minimum propellant trajectory. Furthermore, the results of the hybrid trajectory showed that the goal could be achieved in 161 days, but using 158 g of propellant mass, demonstrating the benefit of using a drift orbit. The results proved the feasibility of implementing iEPS for constellation management using 3U CubeSats in LEO.

FemtoSats for Exploring Permanently Shadowed Regions on the Moon

A lunar reconnaissance drone for cooperative exploration and high-resolution mapping of extreme locations

The EarthASAP mission concept for a Lunar orbiting cubesat

MoonLITE: a CLPS-delivered NASA Astrophysics Pioneers lunar optical interferometer for sensitive, milliarcsecond observing

On orbit validation of solar sailing control laws with thin-film spacecraft

GNC Challenges and Opportunities of CubeSat Science Missions Deployed from the Lunar Gateway

Exploring the Design Space of Lunar GNSS in Frozen Orbit Conditions

3Cat-8 Mission: A 6-Unit CubeSat for Ionospheric Multisensing and Technology Demonstration Test-Bed

FIRST Explorer -- An innovative low-cost passive formation-flying system

How to Deploy a 10-km Interferometric Radio Telescope on the Moon with Just Four Tethered Robots

A Lightweight Space-based Solar Power Generation and Transmission Satellite

For submission to Icarus special issue on lunar polar volatiles lunar flashlight science ground and flight measurements and operations using a multi-band laser reflectometer

Unified Approach to Photon-Counting Microlaser Rangers, Transponders, and Altimeters

BLISS: Interplanetary Exploration with Swarms of Low-Cost Spacecraft

Pyxis: A ground-based demonstrator for formation-flying optical interferometry

Science on the Lunar Surface Facilitated by Low Latency Telerobotics from a Lunar Orbiting Platform-Gateway

CubeSat constellation management using Ionic Liquid Electrospray Propulsion

Prospects for using drones to test formation-flying CubeSat concepts, and other astronomical applications

Future Astrometric Space Missions for Exoplanet Science

An On-Orbit CubeSat Centrifuge for Asteroid Science and Exploration