Effect of liquid viscosity on the gas–liquid two phase countercurrent flow in the wellbore of bullheading killing
Hui Liu,Hongtao Liu,Quan Zhang,Ming Fan,Bangtang Yin,Xuerui Wang,Xiaohui Sun,Zhiyuan Wang
DOI: https://doi.org/10.1016/j.petrol.2022.111274
IF: 5.168
2022-11-30
Journal of Petroleum Science and Engineering
Abstract:Studying the gas–liquid two-phase countercurrent flow under high liquid viscosities is key in designing the well-killing parameters of the bullheading method; however, currently, in-depth research on this issue is limited. Herein, using a self-designed vertical visualization wellbore gas–liquid two-phase flow experimental system with a tube diameter of 0.1 m and liquid viscosity in the range of 1–50 mPa s, a simulation experiment of bullheading killing was conducted. The effects of liquid viscosity on the bubble morphology, bubble migration, and gas–liquid countercurrent flow pattern were analyzed, and the mechanism of back pressing of gas during the well-killing process of the bullheading method in a large-scale tube was revealed. Moreover, the influencing factors and variation in the critical displacement of bullheading were analyzed. The results revealed that the stability of Taylor bubbles increased and the number of small bubbles decreased with the increase in liquid viscosity, resulting the gradual shrinkage or disappearance of the churn flow and bubbly flow, expansion of the region of slug flow, and downward movement of the transition boundary between bullet-cup flow and slug flow. On approaching the critical liquid displacement during the process of simulated bullheading, Taylor bubbles rapidly dissociated into small bubbles and turned around during the rising process, forming a gas–liquid downward flow, following which the gas was successfully pressed back. In addition, our analysis revealed that the press-back effect is not always positively correlated with the viscosity of the kill fluid. The critical displacement of the well-killing fluid first decreased and then increased with an increase in the liquid viscosity. Finally, based on the experimental results, an improved calculation method for the critical displacement of bullheading considering the influence of liquid viscosity was established, which could provide important theoretical guidance for the parameter design of bull heading.
energy & fuels,engineering, petroleum