Abstract:This article shows that the governing equations of any plate theory can be directly obtained by manipulating the three-dimensional (3D) equilibrium indefinite equations. Stress components are transformed into plate stress resultants by implementing a few steps proposed in this article. Such a manipulation is shown for simple and complex deformation states. Various known plate theories are considered, such as membrane and bending ones. The most general equations are obtained by referring to higher-order theories based on the Carrera Unified Formulation. To show the method's effectiveness, the differential equations of known (Reissner–Mindlin, Hildelbrand–Reissner–Thomas) and unprecedented plate theories are derived by simply working on the 3D-equilibrium equations. The introduced manipulation consists of the following steps: Equation (1) (1) −σij,i=Pj,i,j=x,y,z (1) The 3D equilibrium elasticity is formally written for each of the degrees of freedom of the considered plate theories; Equation (2) (2) −Nxx,x=qx,−Nyy,y=qy. (2) the stress resultants are used to replace stress components in the latter equations; Equation (3) (3) ux(x,y,z)=ux0(x,y)+z ux1(x,y)+ezux2(x,y)uy(x,y,z)=uy0(x,y)+z uy1(x,y)+z3uy2(x,y)uz(x,y,z)=uz0(x,y)+z uz1(x,y)+z cos (2zh) uz2(x,y). (3) the derivatives of the stress components along the plate reference surface coordinate x , y do not affect the nature of the indefinite equilibrium equations, and these derivatives are directly moved to the related stress resultants; Equation (4) (4) δu:−Tx,x−Ty,y−Tz,z=P (4) the derivatives over the thickness coordinate z should: (i) change the sign of the related stress resultants and (ii) be applied to the base functions of z used to define the stress resultants (as well as the assumption for the displacement along the thickness). In conclusion, this article presents a straightforward method that can effectively replace the use of Newton and Lagrange methods to derive the equilibrium equations of any plate theory. The four steps introduced in this article demonstrate the simplicity and efficiency of this approach.

The von Karman equations for plates with residual strain

Exact Solution for Axisymmetric Deformation of Laminated Transversely Isotropic Annular Plates

Three-dimensional Elasticity Solutions for Bending of Generally Supported Thick Functionally Graded Plates

Derivation of a von Kármán plate theory for thermoviscoelastic solids

On a Consistent Finite-Strain Plate Theory of Growth

On A Consistent Finite-Strain Plate Theory for Incompressible Hyperelastic Materials

The incompressible von Kármán theory for thin prestrained plates

Variational Problems for Foppl-von Karman plates

Periodically wrinkled plate of the Föppl-von Kármán type

Governing equations of plate theories by direct manipulation of three-dimensional elasticity equilibrium

Revisiting Kirchhoff–Love plate theories for thin laminated configurations and the role of transverse loads

Incompatible Deformations in Hyperelastic Plates

On a Finite-Strain Plate Theory for Growth-Induced Plane-Strain Deformations and Instabilities of Multi-Layered Hyperelastic Plates

Finite Deformation Analysis of the Elastic Circular Plates under Pressure Loading

A microstructure-dependent Kirchhoff plate model based on a reformulated strain gradient elasticity theory

On simplified deformation gradient theory of modified gradient elastic Kirchhoff–Love plate

A simple recovery post-processing of stresses and displacements in Reissner–Mindlin analysis of anisotropic laminated plates

Non-Linear Bending of Functionally Graded Thin Plates with Different Moduli in Tension and Compression and Its General Perturbation Solution

Non-Linear Mathematical Model Of Viscoelastic Thin Plates With Its Applications

Nonlinear Large Deformation Problem of Rectangular Thin Plates and Its Perturbation Solution under Cylindrical Bending: Transform from Plate/membrane to Beam/cable

Analytical solution of cross- and angle-ply nano plates with strain gradient theory for linear vibrations and buckling