Abstract:The effect of cooling on the brittleness of glasses in general, and bulk metallic glasses (BMGs) in particular, is usually studied with continuously varying cooling rates; slower cooling rates lead to stiffer, harder, and more brittle glasses than higher cooling rates. These protocols obscure any potential discontinuity that a glass might experience depending on whether its microstructure resembles that of a fragile or a strong glass-forming liquid. Here, we use large-scale molecular dynamics to simulate the nanoindentation behavior of model BMGs (Zr$_{0.6}$Cu$_{0.3}$Al$_{0.1}$) obtained by rapidly quenching equilibrium melts from temperatures above and below the fragile-to-strong transition temperature $T_\textrm{fst}$, leading to fragile and strong glasses, respectively. While the contact modulus deduced from the indentation simulation evolves smoothly with the temperature $T_\text{q}$ from which the melt is quenched, the plastic response changes quasi-discontinuously as $T_\text{q}$ passes through $T_\textrm{fst}$. In particular, strong glasses develop highly asymmetric flow profiles with mature shear bands, in contrast to fragile glasses. Quantitative differences reveal themselves not only through a formal von Mises localization parameter analysis but also through image analysis of flow patterns using pre-trained artificial intelligence models. Moreover, seemingly erratic flow profiles for our indentation geometry produced surprisingly reproducible and, thus, deterministic features. It remains to be determined to what extent other classes of glass formers follow our observation that the degree of brittleness is significantly influenced by whether the melt is fragile or strong when it falls out of equilibrium at the glass transition temperature.

Wavelike fracture pattern in metallic glasses: a Kelvin-Helmholtz flow instability

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Evolution of nanoscale morphology on fracture surface of brittle metallic glass

Ductile to brittle transition of fracture of a Zr-based bulk metallic glass: Strain rate effect

Structural Processes That Initiate Shear Localization in Metallic Glass

Tension Fracture Behavior of Zr41.25ti13.75ni10cu12.5be22.5 Bulk Metallic Glass

Deformation Behavior of Metallic Glasses with Shear Band Like Atomic Structure: a Molecular Dynamics Study.

"Ductile" Fracture of Metallic Glass Nanolaminates

Flow serration and shear-band viscosity during inhomogeneous deformation of a Zr-based bulk metallic glass

Ductile Fracture of Bulk Metallic Glass Zr 50 Cu 40 Al 10 under High Strain-Rate Loading

Atomic Scale Fluctuations Govern Brittle Fracture and Cavitation Behavior in Metallic Glasses

Crack tip cavitation in metallic glasses

Fractal analysis on the uniformity between the shear bands and serrated flows of a Zr-based bulk metallic glass

Densification and Strain Hardening of a Metallic Glass under Tension at Room Temperature.

Investigation on Structural Instability Induced Relaxation and Crystallization in ZrCuAlNi Bulk Metallic Glass

Tensile fracture morphologies of bulk metallic glass

Brittleness of metallic glasses dictated by their state at the fragile-to-strong transition temperature

Unravel Unusual Hardening Behavior of a Pd–Ni–P Metallic Glass in Its Supercooled Liquid Region

Structural heterogeneity governing deformability of metallic glass

Cavitation in materials with distributed weak zones: Implications on the origin of brittle fracture in metallic glasses

A new constitutive model for shear banding instability in metallic glass