Abstract:A new photocatalyst called Co3O4‐Bi2O3 was created utilizing a simple affordable co‐precipitation process with cobalt nitrate and bismuth nitrate as metal precursors. The structural and optical characteristics of the produced material were characterized using XRD, FTIR, TEM, SEM‐EDS, XPS, UV‐DRS, PL, BET, and TGA.The band gap energy of virgin Co3O4 and Bi2O3 was found to be 2.4 and 2.7 eV, respectively, whereas that of the heterojunction composite was lowered to 2.1 eV.The modified cobalt oxide composites perform better as photocatalysts than the pure ones due to their narrow band gap energy, increased surface area, excellent absorption in the visible range, and decreased charge carrier recombination.The photocatalytic activity of the composite was assessed by altering factors such as pH, dye concentration, catalyst dosage, temperature, and duration. Within 60 minutes, the heterojunction composite degraded MB and MG to 98 % (at pH=11) and 97 % (at pH=9), respectively.The photodegradation of both dyes follows a pseudo‐first order kinetic model, and the thermodynamic investigation revealed that the process is spontaneous and endothermic.To investigate the function of radicals in degradation mechanisms, a reactive species trapping analysis was performed, and the important participation of the hydroxyl radical was discovered.The modified catalyst demonstrated a modest decrease in degrading efficiency after the fifth cycle, making it suitable for practical application. In the photodegradation method, electrons in the Valence band of cobalt oxide and bismuth oxide were stimulated and hopped to the conduction band when exposed to sun radiation. The electrons from the CB of Bi2O3 transferred to the CB of Co3O4 resulting reduction in the charge carrier recombination. A cost‐effective and simple co‐precipitation approach was used to create an efficient photocatalyst Co3O4‐Bi2O3 with identical stoichiometry (1 : 1 of both Co3O4 and Bi2O3). XRD, FTIR, TEM, SEM‐EDS, XPS, UV‐DRS, PL, BET, and TGA were used to characterize the produced material's structural and optical properties. The presence of a single phase spinel structure with a distinctive plane (311) was verified by the XRD peak of 2 at 36.9° for Co3O4‐Bi2O3. The SEM pictures revealed clustered consolidated spheres, suggesting particle homogeneity and high interconnectedness. The HR‐TEM and SAED pictures revealed an average crystallite size of 28 nm for the Co3O4‐Bi2O3 heterojunction. The UV‐DRS spectral data demonstrated a 2.1 eV reduction in band gap energy for Co3O4‐Bi2O3 (whereas Co3O4 is 2.4 eV and Bi2O3 is 2.7 eV). Under solar light irradiation, pristine Co3O4, Bi2O3, and Co3O4‐Bi2O3 composites were investigated for photocatalytic degradation of Methylene Blue (MB) and Malachite green (MG) dyes. By adjusting factors such as pH, starting dye concentration, catalyst dosage, and agitation duration, the optimal efficiency was determined. The acquired results showed Co3O4‐Bi2O3 ′s superior activity over both precursors. The composite obtained maximal degradation of 98 % (at pH=11) and 97 % (at pH=9) for MB and MG, respectively. The enhanced photo degradation activity of Co3O4‐Bi2O3 can be due to larger visible light absorption, increased surface area, and decreased h+/e− recombination. The reactive species trapping study was performed to determine the importance of superoxide and hydroxyl radicals during photo degradation. Dye degradation was governed by a pseudo‐first‐order kinetic model. The reusability and stability of Co3O4‐Bi2O3 were confirmed by utilizing the same material for five consecutive runs with both MB and MG dyes. Mass spectra analysis provided insights into the successful degradation of dyes, elucidating intermediate products. The synthesized Co3O4‐Bi2O3 nanocomposite offers unrivalled advantages in terms of structural and optical properties, superior photocatalytic activity, and remarkable stability, making it a promising candidate for efficient dye degradation applications without the formation of toxic by‐products.

Synthesis and structure of a bismuth-cobalt bimetal coordination polymer for green efficient photocatalytic degradation of organic wastes under visible light

Z-scheme Bismuth-Rich Bismuth Oxide Iodide/bismuth Oxide Bromide Hybrids with Novel Spatial Structure: Efficient Photocatalytic Degradation of Phenolic Contaminants Accelerated by in Situ Generated Redox Mediators.

Rod-like Bi4O7 Decorated Bi2O2CO3 Plates: Facile Synthesis, Promoted Charge Separation, and Highly Efficient Photocatalytic Degradation of Organic Contaminants

A novel cobalt-based coordination polymer for rapid degradation of organic dyes in water by visible light assistance

Ligand-induced synthesis of two Cu-based coordination polymers and derived carbon-coated metal oxide heterojunction for enhanced photocatalytic degradation

Enhanced photocatalytic degradation of imidacloprid and RhB by the precursor derived Bi12.7Co0.3O19.35 under different pH value

Boosting photocatalytic activity through in-situ phase transformation of bismuth-based compounds on carbon dots and quantification analysis of intrinsically reactive species in photocatalysis

Hierarchical Bi2MoO6 microsphere photocatalysts modified with polypyrrole conjugated polymer for efficient decontamination of organic pollutants

Enhancement of photocatalytic activity of BiOCl by doping with variable metal Co and related studies on degradation of organic pollutants

Enhanced Photocatalytic Degradation of Bisphenol A by Co-doped BiOCl Nanosheets under Visible Light Irradiation

Fabrication of Hierarchical BiOI/Bi2MoO6 Heterojunction for Degradation of Bisphenol A and Dye under Visible Light Irradiation

Photocatalytic degradation of imidacloprid by optimized Bi2WO6/NH2-MIL-88B(Fe) composite under visible light

BiMO3 (M = Co, Fe, Mn) perovskite activating peroxymonosulfate-based advanced oxidation process in imidacloprid degradation

Heterostructured Bismuth Molybdate Composite: Preparation and Improved Photocatalytic Activity under Visible-Light Irradiation

The core-shell structure of C/BiOBr@Co-MOF for efficient degradation of organic dyes under visible light

Effortless Fabrication of Bi2O3‐Co3O4 Nanocomposite Catalyst: Harnessing Photocatalytic Power for Efficient Cationic Dye Degradation

Facile interface engineering of hierarchical flower spherical-like Bi-metal-organic framework microsphere/Bi2MoO6 heterostructure for high-performance visible-light photocatalytic tetracycline hydrochloride degradation

Visible-light sensitive cobalt-doped BiVO4 (Co-BiVO4) photocatalytic composites for the degradation of methylene blue dye in dilute aqueous solutions

Preparation of visible-light photocatalysts of Bi2O3/Bi embedded in porous carbon from Bi-based metal organic frameworks for highly efficient Rhodamine B removal from water

Photocatalytic activity of (002) crystalline facets for novel Bi-sourced Bi-MOF nanoparticles enhanced degradation of rhodamine B and reduction of hexavalent chromium

Preparation of Bi3.64Mo0.36O6.55 by reflux method and its application in photodegradation of organic pollution