Abstract:Upconversion nanoparticles (UCNPs) and carbon quantum dots (CQDs) have emerged as promising candidates for enhancing both the stability and efficiency of perovskite solar cells (PSCs). Their rising prominence is attributed to their dual capabilities: they effectively passivate the surfaces of perovskite-sensitive materials while simultaneously serving as efficient spectrum converters for sunlight. In this work, we synthesized UCNPs doped with erbium ions as down/upconverting ions for ultraviolet (UV) and near-infrared (NIR) light harvesting. Various percentages of the synthesized UCNPs were integrated into the mesoporous layers of PSCs. The best photovoltaic performance was achieved by a PSC device with 30% UCNPs doped in the mesoporous layer, with PCE = 16.22% and a fill factor (FF) of 74%. In addition, the champion PSCs doped with 30% UCNPs were then passivated with carbon quantum dots at different spin coating speeds to improve their photovoltaic performance. When compared to the pristine PSCs, a fabricated PSC device with 30% UCNPs passivated with CQDs at a spin coating speed of 3000 rpm showed improved power conversion efficiency (PCE), from 16.65% to 18.15%; a higher photocurrent, from 20.44 mA/cm2 to 22.25 mA/cm2; and a superior fill factor (FF) of 76%. Furthermore, the PSCs integrated with UCNPs and CQDs showed better stability than the pristine devices. These findings clear the way for the development of effective PSCs for use in renewable energy applications.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to improve the efficiency and stability of perovskite solar cells (PSCs). Specifically, researchers synthesize erbium - doped up - conversion nanoparticles (UCNPs) and carbon quantum dots (CQDs) and integrate them into perovskite solar cells to achieve the following goals: 1. **Enhance light - absorption ability**: UCNPs can convert near - infrared (NIR) light into visible light, thus expanding the absorption range of perovskite materials for the solar spectrum. 2. **Improve photovoltaic performance**: By optimizing the doping ratio of UCNPs in the mesoporous layer and using CQDs with different spin - coating speeds for passivation treatment, the photoelectric conversion efficiency (PCE), short - circuit current density ($J_{sc}$), open - circuit voltage ($V_{oc}$) and fill factor (FF) of perovskite solar cells are further improved. 3. **Enhance device stability**: UCNPs and CQDs not only improve the light - absorption efficiency, but also enhance the environmental stability of the perovskite layer, enabling it to maintain high efficiency during long - term storage. ### Main achievements - **Optimal UCNP doping ratio**: When the doping ratio of UCNPs in the mesoporous layer is 30%, the performance of PSCs reaches the optimum, with a PCE of 16.22% and an FF of 74%. - **Performance improvement after introducing CQDs**: After further passivation treatment by spin - coating CQDs (3000 rpm), the PCE is increased from 16.65% to 18.15%, the short - circuit current density is increased from 20.44 mA/cm² to 22.25 mA/cm², and the FF is increased to 76%. - **Enhanced stability**: PSCs integrated with UCNPs and CQDs show better stability than the original devices. These results indicate that through rational design and optimization of the application of UCNPs and CQDs, the performance of perovskite solar cells can be significantly improved, providing a new approach for the development of renewable energy technologies.

Fabrication of Erbium-Doped Upconversion Nanoparticles and Carbon Quantum Dots for Efficient Perovskite Solar Cells

Carbon Quantum Dot-Passivated Perovskite/Carbon Electrodes for Stable Solar Cells

Dye Sensitization and Local Surface Plasmon Resonance-Enhanced Upconversion Luminescence for Efficient Perovskite Solar Cells

Carbon Quantum Dot Additive Engineering for Efficient and Stable Carbon-Based Perovskite Solar Cells

Dual-interface modification effect of Carbon Quantum Dots on the performance of Polymer Solar Cells

Synergetic Exterior and Interfacial Approaches by Colloidal Carbon Quantum Dots for More Stable Perovskite Solar Cells Against UV

Dual interfacial engineering to improve ultraviolet and near-infrared light harvesting for efficient and stable perovskite solar cells

Application of quantum dots in perovskite solar cells

High-Performance Perovskite Solar Cells Based on NaCsWO3@ NaYF4@NaYF4:Yb,Er Upconversion Nanoparticles

Enhancing photovoltaic efficiency in flexible perovskite solar cells through the incorporation of up-conversion Er 3+ doped forsterite thin films

Boosting Multiple Interfaces by Co-Doped Graphene Quantum Dots for High Efficiency and Durability Perovskite Solar Cells.

Exploring various Integration Methods of carbon quantum dots in CsPbCl3 perovskite solar cells for enhanced power conversion efficiency

Enhancing the Efficiency of Perovskite Solar Cells through Interface Engineering with MoS2 Quantum Dots

Design and Synthesis of Fluorinated Quantum Dots for Efficient and Stable 0D/3D Perovskite Solar Cells

Synergistic Passivation and Down‐Conversion by Imidazole‐Modified Graphene Quantum Dots for High Performance and UV‐Resistant Perovskite Solar Cells

Nanoscale enhancements in perovskite-based photovoltaics

Improving PSCs' Short-circuit Current by Adding NaErF4:0.5%Tm@NaLuF4 Up-conversion Nanoparticles Insertion Layer

Tunable Photoluminescent Nitrogen-Doped Graphene Quantum Dots at the Interface for High-Efficiency Perovskite Solar Cells

Efficient and stable perovskite solar cells thanks to dual functions of oleyl amine-coated PbSO4(PbO)4 quantum dots: Defect passivation and moisture/oxygen blocking

Enhanced photoelectric performance of dual cations quantum dots carbon-based perovskite solar cells with stacked structure

Synergetic modification on buried and upper surfaces of perovskites with nitrogen-doped carbon quantum dots for efficient and stable solar cells