Study on oxidation and pyrolysis characteristics of lignite damaged by liquid CO2 at low-temperature

Zhuangzhuang Shao,Bo Tan,Tianze Li,Yan Guo,Haiyan Wang,Xiaomeng Li,Gang Cheng,Pengchao Wang
DOI: https://doi.org/10.1016/j.fuel.2022.124371
IF: 7.4
2022-09-01
Fuel
Abstract:In order to study the oxidation and pyrolysis characteristics of lignite damaged by liquid CO2 (L-CO2) at low-temperature, the coal sample was treated by L-CO2 leaching device, TG-DSC-FTIR experiment and scanning electron microscopy were carried out to study the variation characteristics of parameters such as TG-DSC characteristic temperature, gas generation, functional groups and surface structure of lignite damaged by L-CO2 at low-temperature. The results show that the coal pores change from micropore (<2nm) to mesopore (2–50 nm) to macropore (>50 nm) after low-temperature L-CO2 leaching; The spectral peak intensity and peak area of the coal samples treated with L-CO2 increased in different degrees compared with that of the raw coal. The absorption strength of C(DH) coal samples increased by 500% compared with that of R(DH), and the relative contents of CO, CO and COOH increased by 54.9%, 121.4% and 700%, respectively; The critical temperature and drying temperature of L-CO2 leached coal sample decreased by 1.5–10℃ compared with that of raw coal sample, and the growth rate temperature, weight loss temperature, ignition temperature, maximum weight loss temperature and burnout temperature advanced by 8–20℃; The total heat release of treated coal samples is higher than that of raw coal, among which the change of coal samples with particle size of DH is the most obvious, and Its heat release reaches 5.18×103J·g−1, increased by 175%; The contents of CO decreased after the treatment of three coal samples with particle sizes of DH, DM and DL, while the contents of H2O and CO2 increased. The intensity of CO2 absorption peak was 1.65 times, 1.57 times and 1.29 times of raw coal respectively; The research results have important theoretical and practical significance for the prevention and control of coal reburning after L-CO2 fire extinguishing.
energy & fuels,engineering, chemical
What problem does this paper attempt to address?