Abstract:Natural gas with methane as the main constituent is a natural resource that exceeds the reserves of oil in abundance. With inevitable depletion of crude oil, methane will become the major resource for chemicals and liquid fuels in future decades. Extensive efforts have been afforded to both direct and indirect conversion of methane. The direct-conversion approaches involve, for example, the selective oxidation of methane to methanol or formaldehyde, the oxidative coupling of methane (OCM) to C2 species (C2H6 and C2H4) and so on. Since the pioneering work of Keller and Bhasin, much research has been carried out into developing highly efficient catalysts for OCM. Unfortunately, the per pass C2 yields on nearly all reported catalysts are less than 30 %. OCM is believed to occur through a heterogeneous–homogeneous pathway. The mechanism proposes first the catalytic formation of methyl groups on catalyst surface, which desorb as free radicals (CH3·) into the gas phase and ultimately react by predominantly homogeneous pathways. 8] It is generally agreed that some oxygen species O* adsorbed on the catalyst surface are the active oxygen species for the activation of methane to form methyl radicals and play a key role in the selective generation of C2, whereas gaseous oxygen molecules mainly favor the formation of COx. [9–12] By assuming a reaction mechanism via methyl radicals formed by the reaction of methane with surface oxygen species, an upper limit of 28 % for the C2 yield is forecasted for a continuous, CH4/O2 co-fed, single pass process under conventional conditions, such as those used for laboratory screening. The inherent reason for such a limited C2 yield is that the gaseous oxygen—as required oxidant for OCM—can react with the more reactive C2 product to form COx and, thus, a higher C2 selectivity is always compromised with a lower CH4 conversion. [14] To attain a high C2 yield, it is necessary to reduce the nonselective gaseous oxygen concentration. Perovskite oxides with mixed conductivities have been attracting increasing attention due to their potential applications in air separation, as catalysts for selective oxidation, and as reactors for the partial oxidation of hydrocarbons or for other oxygen-involving reactions. Moreover, in the past decade, halide-modified oxides have been widely studied for oxidative dehydrogenation of ethane (ODE) to ethylene and were proven to offer a significant improvement in the performance of the selective oxidation. In this study, a novel chlorinedoped Ba0.5Sr0.5Fe0.2Co0.8O3 d (denoted as BSCFCls) was used as catalyst for the OCM in a fixed-bed reactor. Furthermore, N2O was chosen as the oxygen source because it is a relatively weak oxidant, which is suitable for selective oxidation. Herein, we want to show that (a) the introduction of Cl into Ba0.5Sr0.5Fe0.2Co0.8O3 d enhances the selectivity for the methyl radical formation and (b) N2O as oxidant can effectively reduce gaseous oxygen concentration, since it provides oxygen in the form of surface oxygen species rather than gas-phase oxygen molecules by decomposition on the catalyst surface. Figure 1 shows the concept of OCM on perovskite oxide catalysts using N2O as oxidant.

Oxychlorination of methane over FeOx/CeO2 catalysts

Room-Temperature Conversion of Methane to Methanediol by [Feo2].

Room-Temperature Conversion of Methane to Methanediol by [FeO<sub>2</sub>]<sup>+</sup>

CO and Methane Oxidation Over CeXZr1-XO2 Mixed Oxide Supported PdO Catalysts

Reaction of Methane with MOx/CeO2 (M = Fe, Ni, and Cu) Catalysts: in Situ Studies with Time-Resolved X-ray Diffraction

Study on direct aromatization reaction of methane: I. The reaction performance of supported Mo catalysts under oxygen-free conditions

Aqueous‐Phase Selective Oxidation of Methane with Oxygen over Iron Salts and Pd/C in the Presence of Hydrogen

High-efficiency electrochemical methane conversion using Fe2O3-based catalysts assisted by thermochemical active oxygen

Oxidative Coupling of Methane with High C2 Yield by Using Chlorinated Perovskite Ba0.5Sr0.5Fe0.2Co0.8O3−δ As Catalyst and N2O As Oxidant

Selective Oxidation of Methane to Methanol over Ceria‐Zirconia Supported Mono and Bimetallic Transition Metal Oxide Catalysts

Chemical looping combustion of ultra low concentration of methane with Fe2O3/Al2O3 and CuO/SiO2

Oxidative carbonylation of methane to acetic acid on an Fe-modified ZSM-5 zeolite

Oxidant-assisted methane pyrolysis

CePMo 12 O 40 / TiO 2 Catalysts for Photocatalytic Oxidation of Methane to Value‐added Organic Oxygenates

Fabrication of FeO3 sites in FeOx/ZnO for efficient and selective photo-catalytic oxidation of methane to liquid oxygenates

Operando XAS Study of Pt-Doped CeO 2 for the Nonoxidative Conversion of Methane

CH4 and CH2O Oxidation in Lean Gas Engine Exhaust Using Fe2O3 Catalysts

Confined Oxygen Promotes Radical Generation for Methane Oxidation Toward Liquid Oxygenates

Selective Oxidation Of Methane To Methanol Over Wo3/Co-Fe-Mo-O Catalysts.

Selective electrochemical oxidative coupling of methane mediated by Sr2Fe1.5Mo0.5O6-δ and its chemical stability

Synthesis of Nanoparticle Ce–Mg–O Mixed Oxide As Efficient Support for Methane Oxidation