Abstract:The absorption heat exchanger is a key component in the novel district heating systems based on absorption cycles. It can maintain the primary water return temperature at a quite low level and realize covering more waste heat recycle. Because in most working conditions the temperature drop and rise in a single absorber or evaporator is as high as 20-30 K, the multi-stage structure of this device has been proposed. The theoretical analysis have shown that this kind of structure can make heat transfer process more matched to realize much lower outlet temperature of primary water, while single-stage structure can only achieve a relatively high level. This is because of the multi-stage pressure and temperature gradient. In this study, based on the absorption heat exchanger technology, a vertical three-stage absorber-evaporator experiment unit was designed and built. On a large vacuum test bench, experiments were carried out in different conditions to test the performance. The result shows the experiment unit can achieve large temperature difference on the water side and form three stages of evaporating pressure gradient. With three-stage evaporating pressure gradient, the large triangle heat transfer process disappeared. The most important thing is that it can reduce the water temperature of evaporator side to a low level. Compared with traditional single-stage absorption heat pump, the heat transfer process in the whole absorber and evaporator is more matched and the performance can be better. In the experiment, an important phenomenon shows that the outlet water temperature of the first stage absorber is even higher than the inlet solution temperature. A 1-D differential model was built to analyze and explain the temperature variation inside the device so this experimental phenomenon can be reasonably explained. Finally the experiment unit was directly applied in a real district heating system. It worked as part of a complete multi-stage absorption heat exchanger in one thermal station of the district heating system. The machine has great performance in different heating conditions. It also formed three stages of evaporating pressure gradient. The primary water return temperature, that is, the water outlet temperature of the evaporator, can be as low as 25℃. The temperature level is satisfying and brings lots of benefits to the whole heating system.

Geometry optimization of plate heat exchangers as absorbers in compact absorption refrigeration systems using H2O/ionic liquids

Analysis of a Hybrid System of Adiabatic Absorption two-stage Liquid Desiccant and CO2 Transcritical Cycles

Experimental study on heat/mass transfer and pressure drop of plate heat exchanger desorber for compact and efficient absorption cooling

Theoretical Investigations on the Cycle Performance of a Single-Pressure Diffusion Absorption Heat Transformer with LiBr–H2O-R134a-TEGDME

Design of an H2O-LiBr absorption system using PCMs and powered by automotive exhaust gas

Flow Boiling in Dimpled Plate Heat Exchangers with Different Geometric Parameters: Analysis of Asymmetric Channels

Parametric and comparative study on enhanced microchannel membrane-based absorber structures for compact absorption refrigeration

Heat and mass transfer performance comparison of various absorbers/desorbers towards compact and efficient absorption heat pumps

Performance optimization and comparison towards compact and efficient absorption refrigeration system with conventional and emerging absorbers/desorbers

Experimental assessment of a detachable plate falling film heat and mass exchanger couple using lithium bromide and water as working fluids

Performance Comparison of Absorption Heating Cycles Using Various Low-Gwp and Natural Refrigerants

Experimental Study of a New Ejector-Absorption Refrigeration Cycle Driven by Multi-Heat Sources

Membrane-based absorption cooling and heating: Development and perspectives

Entropy and exergy analysis of a liquid-liquid air-gap hollow fiber membrane contactor

Experimental evaluation on heat/mass transfer and pressure drop of a microchannel membrane‐based desorber for compact and efficient H 2 O/LiBr absorption refrigeration

Experimental parameter study and correlation development of microchannel membrane-based absorption process for efficient thermal cooling with high compactness

Application of hollow fiber membrane solution heat exchanger to absorption refrigeration systems

Performance and optimization of absorption heat exchanger under different flow rate ratio conditions

Experimental Study and Application of Multi-Stage Absorber/ Evaporator Based on Absorption Heat Exchanger

A Novel H2O/LiBr Absorption Heat Pump with Condensation Heat Recovery for Combined Heating and Cooling Production: Energy Analysis for Different Applications

An optimal plate fin heat exchanger for adsorption chilling: Theoretical consideration