Abstract:Separation of dichlorobenzene (DCB) isomers with high purity by time− and energy−saving methods from their mixtures is still a great challenge in the fine chemical industry. Herein, silicalite-1 zeolites/polydimethylsiloxane (PDMS) hybrid membranes (silicalite-1/PDMS) have been successfully fabricated on the porous polyvinylidene fluoride (PVDF) supports to first investigate the pervaporation separation properties of DCB isomers. The morphology and structure of the silicalite-1 zeolites and the silicalite-1/PDMS/PVDF hybrid membranes were characterized by XRD, FTIR, SEM and BET. The results showed that the active silicalite-1/PDMS layers were dense and continuous without any longitudinal cracks and other defects with the silicalite-1 zeolites content no more than 10%. When the silicalite-1 zeolites content exceeded 10%, the surfaces of the active silicalite-1/PDMS layers became rougher, and silicalite-1 zeolites aggregated to form pile pores. The pervaporation experiments both in single-isomer and binary−isomer systems for the separation of DCB isomers was further carried out at 60 °C. The results showed that the silicalite-1/PDMS/PVDF hybrid membranes with 10% silicalite-1 zeolites content had better DCB selective separation performance than the silicalite-1/α−Al2O3 membranes prepared by template method. The permeate fluxes of the DCB isomers increased in the order of m−DCB < o−DCB < p−DCB both in single-isomer and binary-isomers solutions for the silicalite-1/PDMS/PVDF hybrid membranes. The separation factor of the silicalite-1/PDMS/PVDF hybrid membranes for p/o−DCB was 2.9 and for p/m−DCB was 4.6 in binary system. The permeate fluxes of the silicalite-1/PDMS/PVDF hybrid membranes for p−DCB in p/o−DCB and p/m−DCB binary−isomers solutions were 126.2 g∙m−2∙h−1 and 104.3 g∙m−2∙h−1, respectively. The thickness−normalized pervaporation separation index in p/o−DCB binary−isomers solutions was 4.20 μm∙kg∙m−2∙h−1 and in p/m−DCB binary−isomers solutions was 6.57 μm∙kg∙m−2∙h−1. The results demonstrated that the silicalite-1/PDMS/PVDF hybrid membranes had great potential for pervaporation separation of DCB from their mixtures.

Membrane separation of cyclic siloxanes from silicone fluid

Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by in Situ Polymerization

A facile approach to silica-modified polysulfone microfiltration membranes for oil-in-water emulsion separation

Polysulphone Microcapsules Containing Silicone Oil for the Removal of Toxic Volatile Organics from Water.

Preparation of Silicone Polymer Membrane for Separation of Solvents from Lube Oil

Silicalite-1/PDMS Hybrid Membranes on Porous PVDF Supports: Preparation, Structure and Pervaporation Separation of Dichlorobenzene Isomers

Pervaporation Separation of Ethanol/water Mixtures with Chlorosilane Modified Silicalite-1/Pdms Hybrid Membranes

Hydrophobic Nano-Silica/polydimethylsiloxane Membrane for Dimethylcarbonate–methanol Separation Via Pervaporation

Separation of Ethanol from Ethanol/Water Mixtures by Pervaporation with Silicone Rubber Membranes: Effect of Silicone Rubbers

Mesoporous Silica Membranes Silylated by Fluorinated and Non-Fluorinated Alkylsilanes for the Separation of Methyl Tert-Butyl Ether from Water

Separation Mechanism of the Dewaxing Solvent from Dewaxed Oil Using Polysiloxane Membrane

High-Performance Flexible Hybrid Silica Membranes with an Ultrasonic Atomization-Assisted Spray-Coated Active Layer on Polymer for Isopropanol Dehydration

A Facile Method to Control Pore Structure of PVDF/SiO2 Composite Membranes for Efficient Oil/Water Purification

Separation of azeotropic dimethylcarbonate/methanol mixtures by pervaporation: Sorption and diffusion behaviors in the pure and nano silica filled pdms membranes

Rigid-flexible coupled organosilica membranes toward high-efficiency molecules separation

Hydrophobic hollow fiber composite membranes based on hexadecyl-modified SiO 2 nanoparticles for toluene separation

Preparation and separation performance of hybrid pervaporation membrane of silicalite-1/polydimethylsiloxane

Pervaporation Performance of Polydimethylsiloxane/polyetherimide Composite Membrane for Gasoline Desulphurization(v) Mass Transfer Process Study

Thermally Induced Phase Separation Followed by in Situ Sol–gel Process: A Novel Method for PVDF/SiO2 Hybrid Membranes

Efficient desulfurization by polymer-inorganic nanocomposite membranes fabricated in reverse microemulsion

Preparation of modified MFI-type/PDMS composite membranes for the separation of dichlorobenzene isomers via pervaporation