Abstract:In this study, the effects of crystallization conditions (cooling rate and end temperature of cooling) on crystallization behavior and polymorphic composition of isotactic polypropylene/multi-walled carbon nanotubes (iPP/MWCNTs) composites nucleated with different concentrations of -nucleating agent (tradename TMB-5) were investigated by differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD) and scanning electronic microscopy (SEM). The results of DSC, WAXD and SEM revealed that the addition of MWCNTs and TMB-5 evidently elevates crystallization temperatures and significantly decreases the crystal sizes of iPP. Because of the competition between -nucleation (provided by MWCNTs) and -nucleation (induced by TMB-5), the -phase crystallization takes place only when 0.15wt% and higher concentration of TMB-5 is added. Non-isothermal crystallization kinetics study showed that the crystallization activation energy E of -nucleated iPP/MWCNTs composites is obviously higher than that of pure iPP, which slightly increases with the increase of TMB-5 concentration, accompanying with the transition of its polymorphic crystallization behavior. The results of non-isothermal crystallization and melting behavior suggested that the cooling rate and end temperature of cooling (T-end) are important factors in determining the proportion and thermal stability of -phase: Lower cooling rate favors the formation of less amount of -phase with higher thermal stability, while higher cooling rate encourages the formation of higher proportion of -phase with lower thermal stability. The T-end=100 degrees C can eliminate the - recrystallization during the subsequent heating and therefore enhance the thermal stability of the -phase. By properly selecting TMB-5 concentration, cooling rate and T-end, high -phase proportion of 88.9% of the sample was obtained. Copyright (c) 2014 John Wiley & Sons, Ltd.

Phase Behavior and Thermo-Mechanical Properties of IF-WS2 Reinforced PP–PET Blend-Based Nanocomposites

Effective Enhancement of a Carbon Nanothread on the Mechanical Properties of the Polyethylene Nanocomposite

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

Low concentration of inorganic fullerene tungsten sulfide nanofiller to achieve cost‐effective and significant enhancement on thermal and dynamic mechanical properties of perfluoroalkoxy nanocomposites

Design of super-toughened, heat-resistant and antistatic polyethylene terephthalate-based blend composites by constructing a tenacious interface

Mechanical Reinforcement in Poly(propylene Carbonate) Nanocomposites Using Double Percolation Networks by Dual Volume Exclusions

Synchronously Improved Thermal Conductivity and Mechanical Property for Polybenzimidazole Composites by Building the Ternary Hybrid Nanofillers Networks

Inhibited transesterification of poly(butylene terephthalate)/poly(ethylene terephthalate)/SiO2 nanocomposites by two processing methods

The Study on the Microstructures and High Performances of Melt Blending Polyurethane/Multiwalled Carbon Nanotubes Composites

Mechanical Properties of Injection Molded PP/PET-Nanofibril Composites and Foams

Enhanced mechanical and thermal properties of carbon fiber‐reinforced thermoplastic copoly(phthalazinone ether sulfone ketone) composites

Optimizing titanium carbide (TiC) ceramic nanofiller loading in isotactic Polypropylene for MEX additive manufacturing: Mechano-thermal and rheology aspects

Isothermal Crystallization and Subsequent Melting Behavior of Poly(Ethylene Terephthalate)/Silica Nanocomposites

Effects Of Beta-Nucleating Agent And Crystallization Conditions On The Crystallization Behavior And Polymorphic Composition Of Isotactic Polypropylene/Multi-Walled Carbon Nanotubes Composites

Optimization of Isotactic Polypropylene Nanocomposite Content of Tungsten Carbide for Material Extrusion 3D Printing

Simultaneous Enhancement on Thermal and Mechanical Properties of Polypropylene Composites Filled with Graphite Platelets and Graphene Sheets

The Injected Foaming Study of Polypropylene/Multiwall Carbon Nanotube Composite with In Situ Fibrillation Reinforcement

Optimization of Mechanical Performance of Compatibilized Polypropylene/Poly(Ethylene Terephthalate) Blends Via Selective Dispersion of Halloysite Nanotubes in the Blend

Enhanced Thermal Conductivity and Balanced Mechanical Performance of PP/BN Composites with 1 vol% Finely Dispersed MWCNTs Assisted by OBC

Mechanical and Thermal Properties Modeling, Sorption Characteristics of Multiscale (Multiwalled Carbon Nanotubes/Glass Fiber) Filler Reinforced Polypropylene Composites

Structure Tailorable Triple-Phase and Pure Double-Polar-phase Flexible IF-WS2@poly(vinylidene Fluoride) Nanocomposites with Enhanced Electrical and Mechanical Properties