Abstract:Background: Interventional magnetic resonance imaging (MRI) can provide a comprehensive setting for microwave ablation of tumors with real-time monitoring of the energy delivery using MRI-based temperature mapping. The purpose of this study was to quantify the accuracy of three-dimensional (3D) real-time MRI temperature mapping during microwave heating in vitro by comparing MRI thermometry data to reference data measured by fiber-optical thermometry. Methods: Nine phantom experiments were evaluated in agar-based gel phantoms using an in-room MR-conditional microwave system and MRI thermometry. MRI measurements were performed for 700 s (25 slices; temporal resolution 2 s). The temperature was monitored with two fiber-optical temperature sensors approximately 5 mm and 10 mm distant from the microwave antenna. Temperature curves of the sensors were compared to MRI temperature data of single-voxel regions of interest (ROIs) at the sensor tips; the accuracy of MRI thermometry was assessed as the root-mean-squared (RMS)-averaged temperature difference. Eighteen neighboring voxels around the original ROI were also evaluated and the voxel with the smallest temperature difference was additionally selected for further evaluation. Results: The maximum temperature changes measured by the fiber-optical sensors ranged from 7.3 K to 50.7 K. The median RMS-averaged temperature differences in the originally selected voxels ranged from 1.4 K to 3.4 K. When evaluating the minimum-difference voxel from the neighborhood, the temperature differences ranged from 0.5 K to 0.9 K. The microwave antenna and the MRI-conditional in-room microwave generator did not induce relevant radiofrequency artifacts. Conclusion: Accurate 3D real-time MRI temperature mapping during microwave heating with very low RMS-averaged temperature errors below 1 K is feasible in gel phantoms. Relevance statement: Accurate MRI-based volumetric real-time monitoring of temperature distribution and thermal dose is highly relevant in clinical MRI-based interventions and can be expected to improve local tumor control, as well as procedural safety by extending the limits of thermal (e.g., microwave) ablation of tumors in the liver and in other organs. Key points: Interventional MRI can provide a comprehensive setting for the microwave ablation of tumors. MRI can monitor the microwave ablation using real-time MRI-based temperature mapping. 3D real-time MRI temperature mapping during microwave heating is feasible. Measured temperature errors were below 1 °C in gel phantoms. The active in-room microwave generator did not induce any relevant radiofrequency artifacts.

Abstract No. 557 Quantitative Iceball Temperature Mapping During Interventional Cryoablation Procedures with Novel Ultrashort TE Spiral-Readout MRI

3D MR thermometry of frozen tissue: Feasibility and accuracy during cryoablation at 3T

2.5D Thermometry Maps for MRI-guided Tumor Ablation

Thermometry mapping during CT-guided thermal ablations: proof of feasibility and internal validation using spectral CT

Infrared Image to Evaluate the Selective (directional) Freezing Due to Localized Injection of Thermally Important Solutions

Accuracy of 3D real-time MRI temperature mapping in gel phantoms during microwave heating

Beyond Liquid Nitrogen Coolant: Extreme Freezing To Maximize Cryosurgical Ablation Of Tumor

Two-phase Flow and Heat Transfer in a Self-Developed MRI Compatible LN2 Cryoprobe and Its Experimental Evaluation

NUMERICAL SIMULATION OF 3-D FREEZING AND HEATING PROBLEMS FOR COMBINED CRYOSURGERY AND HYPERTHERMIA THERAPY

Disclosure of the significant thermal effects of large blood vessels during cryosurgery through infrared temperature mapping

Numerical Simulation of Freezing and Rewarming in Cryosurgery by the Endocare Cryoprobe System

Abstract No. 561 Systematic Performance Characterization of Cryoprobes used in Interventional Oncology Procedures

Analyzing the Influence Factors of Brain Tumor Cryoablation

Anatomical Model-Based Finite Element Analysis of the Combined Cryosurgical and Hyperthermic Ablation for Knee Bone Tumor.

A Method of Temperature Measurement Using Low Field MRIs With a 3D Steady-state Free Precession Pulse Sequence

Numerical Simulation of Selective Freezing of Target Biological Tissues Following Injection of Solutions with Specific Thermal Properties

An Efficient Thermal Evolution Model for Cryoablation with Arbitrary Multi-Cryoprobe Configuration

[Real-Time and Non-Invasive Temperature Monitoring of Thermotherapy Using MRI].

Thermodynamic properties of atrial fibrillation cryoablation: a model-based approach to improve knowledge on energy delivery

Artifact Correction in Magnetic Resonance Temperature Imaging for Laser Interstitial Thermotherapy with Multi-echo Acquisitions

Comparison of temperature processing methods for monitoring focused ultrasound ablation in the brain