Abstract:A contactless self-calibration temperature sensor based on the rare-earth fluorescence was developed. The new temperature sensing film Yb@PSMM was prepared by dispersed K[Yb(Az)(4)] in poly (styrene-block-methyl methacrylate) and then attached to a clean quartz plate, and the optical properties of Yb3+ in this system under different temperature were investigated. The shape of the fluorescence emission spectrum of Yb3+ changed regularly with temperature, and the distribution of extra-nuclear electrons in the Stark cleavage sublevels of Yb3+ at different temperatures still obeyed Boltzmann distribution law. The natural logarithm (In) of the ratio of the two characteristic emission peak areas at 900 similar to 990 and 990 similar to 1 150 nm in the fluorescence spectrum linearly varied with the reciprocal of temperature (1/T) from -195 to 105 degrees C. Upon using this linear relation as the standard curve, this temperature sensing method exhibited a temperature resolution of 0. 1 degrees C around 0 . Compared with the reported luminescence temperature sensors, the new temperature sensor proposed in this paper had advantages as follows. Firstly, the Stokes shift of the selected luminescent material was larger than 500 nm, which effectively avoided the interference of environmental backgrounds. Secondly, due to the use of fluorescence integrated peak areas instead of fluorescence intensities, the influence of random errors introduced by the instrument or measurement was greatly reduced. Thirdly, by taking advantage of the radiometric relationship between the intensities of different fluorescence peaks in one compound, a reliable self-calibration was introduced in this system equality, which effectively reduced the influence of external factors such as the variation of fluorescent material concentration, geometric configuration, or light source intensity. Fourthly, as a rare-earth luminescence material, the sensing method could utilize the characteristics of long fluorescence lifetime, good fluorescence monochromaticity, and high fluorescence intensities. Fifthly, the temperature sensing film was almost insoluble and indiffusible in water, which was convenient for direct measurement of the in-situ temperature changes. Lastly, Yb2+ emission was from 900 to 1 150 nm, due to the deep penetration of near infrared light, this temperature sensor would have a wide potential use in temperature-sensing and imaging of complex system. Further ensuring method for the measurement results of the temperature sensor was adopted in our measurement device : the irradiated spot size on the sample could be adjusted to be about 1 mm 2 , and the angle between the placement di- rection of Yb@PSMM film and the excitation light was set to be 225 degrees. Thus, the influence of the reflected light was circumvented, but the fluorescent emission light was hardly affected.

Multipath optical thermometry realized in CaSc 2 O 4 : Yb 3+ /Er 3+ with high sensitivity and superior resolution

High-sensitivity Ratiometric Thermometers of Yb 3+/er 3+/tm 3+Co-Doped LuScO 3 Single Crystal Fibers Based on Non-Thermally Coupled Energy Levels

High-sensitivity Ratiometric Thermometers of Yb3+/Er3+/Tm3+ Co-Doped LuScO3 Single Crystal Fibers Based on Non-Thermally Coupled Energy Levels

Yb,Er,Tm:Sc2O3 Single Crystal Fibers for Multi-Mode Optical Thermometry

Multipath optical thermometry realized by electronic levels and Stark sublevels of Er3+

Ultrasensitive optical thermometer based on abnormal thermal quenching Stark transitions operating beyond 1500 nm

Highly Sensitive Optical Thermometer Based on Li+-doped Erbium Ytterbium Silicate Films

A multi-mode optical thermometer based on the up-conversion Ca3Y2Ge3O12: Er3+, Yb3+ phosphor

Designing multi-mode optical thermometers via Sb3+/Er3+ co-doped Cs2NaInCl6 lead-free double perovskite microcrystals

Winning wide-temperature-range and high-sensitive thermometry by a multichannel strategy of dual-lanthanides in the new tungstate phosphors

Design strategies for three highly sensitive multimodal optical thermometers based on diverse luminescence thermal-response in BaLu2Si3O10:Ln3+, Yb3+ phosphors (Ln3+=Er3+, Ho3+, Nd3+)

Simultaneous Yb 3+ -Induced Phase Transition and Sensitized Luminescence in Er 3+ -Doped KNN-Based Lead-Free Ceramics for Optical Thermometry

Self-calibrated multi-mode optical thermometry in up-converting phosphor Cs2NaErCl6: Yb3+

A Contactless Self-Calibration Temperature Sensor Based on the Rare-Earth Fluorescence

Optical temperature-sensing phosphors with high sensitivities in a wide temperature range based on different strategies

Scalable synthesis of ytterbium and erbium codoped calcium molybdate phosphors as upconversion luminescent thermometer

High sensitivity and multicolor tunable optical thermometry in Bi3+/Eu3+ co-doped Ca2Sb2O7 phosphors

Understanding differences in Er3+-Yb3+ codoped glass and glass ceramic based on upconversion luminescence for optical thermometry

Pure-green upconversion emission and high-sensitivity optical thermometry of Er3+-doped stoichiometric NaYb(MoO4)2

Sb3+ and Er3+ Co-Doped Cs2NaYCl6 Double Perovskite with Ultra-High Sensitivity for Optical Thermometry

Temperature sensing performance of Er3+:Yb3+ co-doped CaF2 ceramic powders using near-infrared light