Abstract:The mid-infrared (MIR) laser heterodyne spectroscopy with high sensitivity and high spectral resolution is a remote sensing technique for detecting atmospheric trace gas's column concentration and vertical concentration profile by using a narrow linewidth laser as a local oscillator (LO) and amplifying the weak absorption signal. This paper proposes a new instrument structure based on the current laser heterodyne radiometer (LHR). A direct absorption spectrum system was introduced in the laser heterodyne system to realize the selection of working wavelength and frequency calibration. A compact IR blackbody source EMIRS200 was used as the broadband radiation source to replace sunlight and verify and analyze the laser heterodyne system. It provides a new method for the next system integration of LHR. A MIR-wide tuning LHR proof-of-concept (PoC) system was developed, and the basic parameters of the system were tested and analyzed. The system used an 8,um external cavity quantum cascade laser (EC-QCL) as the LO and an IR blackbody source, EMIRS200, as the radiation source. After testing and analyzing the basic parameters of the system, the signal-to-noise ratio (SNR) (similar to 120) and heterodyne conversion efficiency (-0. 006) of the system were measured. The stability time of EC-QCL measured was at least 133s using Allan variance analysis, so it is very suitable for laser heterodyne spectrum acquisition. The limit of detection (LoD) of the 16 minimum volume fraction of the direct absorption spectrum system was 2. 312 /10 (8), which can meet the requirements of highly sensitive detection of atmospheric CH4 and realize the selection of working wavelength and frequency calibration of the heterodyne system. Finally, the high-resolution heterodyne absorption spectrum of CH4 at 8 mu m was obtained by using the established LHR PoC system and compared with the direct absorption spectra of CH4 at 8 mu m. Finally, the spectral resolution parameters of the system were fitted, and the high spectral resolution of the LHR PoC system was verified, which can satisfy the high-resolution laser heterodyne spectrum measurement under the condition of narrow laser linewidth. Experimental results show that the direct absorption spectrum system can be used to select working wavelength and calibrate the frequency of the laser heterodyne system. The compact IR blackbody source EMIRS200 can be used to optimize the structure of LHR to realize the analysis and verification of the laser heterodyne system, which provides an experimental basis for further application in the measurement of multi-component gas spectrum in the actual atmosphere and expands the application of LHR in the field of high-precision remote sensing.

Strong smog penetrating capability of quantum cascade laser at 8.9 micrometre

Target Acquisition for Collimation System of Wireless Quantum Communication Networks in Low Visibility

Long-Wave Infrared Discrete Multitone Free-Space Transmission Using a 9.15-Μm Quantum Cascade Laser

Direct Modulation and Free-Space Transmissions of up to 6 Gbps Multilevel Signals With a 4.65-m Quantum Cascade Laser at Room Temperature

Directly Modulated Quantum Cascade Laser and Its Application in Free-Space Communications

Advancing LWIR FSO Communication Through High-Speed Multilevel Signals and Directly Modulated Quantum Cascade Lasers

Broadband and High-Enhancement-factor Integrated Long-Wave Infrared Sensor Using the Photonic Crystal Assisted Subwavelength Grating Waveguide

Long-range Micro-Pulse Aerosol Lidar at 15 Μm with an Upconversion Single-Photon Detector

Research on Middle Infrared Laser Heterodyne Remote Sensing Technology Based on EC-QCL

Intelligent Mixed Trace Gas Recognition Driven by Frequency-Dependent Infrared QDs Laser Phototransistor

Long-range micro-pulse aerosol lidar at 1.5 um with an up-conversion single-photon detector

Long Range 3D Imaging Through Atmospheric Obscurants Using Array-Based Single-Photon LiDAR.

Infrared scanning near-field optical microscopy (IR-SNOM) for thermal profiling of quantum cascade lasers

Mid-infrared gas sensing using uncooled quantum cascade laser with low power consumption

A Mid-Infrared Quantum Cascade Laser Ultra-Sensitive Trace Formaldehyde Detection System Based on Improved Dual-Incidence Multipass Gas Cell

Monolithically, widely tunable quantum cascade lasers based on a heterogeneous active region design

Sub-ppb aerosol detection at a distance of 30 meters by millijoule femtosecond laser pulse filamentation in air

Long-working-distance Microscopic Imaging Through a Scattering Medium Using Supercontinuum Illumination

Influence of haze on pulse and FMCW laser ranging accuracy

Near-Infrared Induced Optical Quenching Effects on Mid-Infrared Quantum Cascade Lasers

Simulation of Compact Spaceborne Lidar with High-Repetition-Rate Laser for Cloud and Aerosol Detection under Different Atmospheric Conditions.