Abstract:A molecular tagging velocity (MTV) technique is developed to non-intrusively measure velocity in an integral effect test (IET) facility simulating a high temperature helium-cooled nuclear reactor in accident scenarios. In these scenarios, the velocities are expected to be low, on the order of 1 m/s or less, which forces special requirements on the MTV tracer selection. Nitrous oxide (N2O) is identified as a suitable seed gas to generate NO tracers capable of probing the flow over a large range of pressure, temperature, and flow velocity. The performance of N2O-MTV is assessed in the laboratory at temperature and pressure ranging from 295 to 781 K and 1 to 3 atm. MTV signal improves with a temperature increase, but decreases with a pressure increase. Velocity precision down to 0.004 m/s is achieved with a probe time of 40 ms at ambient pressure and temperature. Measurement precision is limited by tracer diffusion, and absorption of the tag laser beam by the seed gas. Processing by cross-correlation of single shot images with high signal-to-noise ratio reference images improves the precision by about 10% compared to traditional single shot image correlations. The instrument is then deployed to the IET facility. Challenges associated with heat, vibrations, safety, beam delivery, and imaging are addressed in order to successfully operate this sensitive instrument in-situ. Data are presented for an isothermal depressurized conduction cool-down. Velocity profiles from MTV reveal a complex flow transient driven by buoyancy, diffusion, and instability taking place over short (<1 s) and long (>30 min) time-scales at sub-meter per second speed. The precision of the in-situ results is estimated at 0.027, 0.0095, and 0.006 m/s for a probe time of 5, 15, and 35 ms, respectively.

Long-lived nitric oxide molecular tagging velocimetry with 1 + 1 REMPI

Multiline molecular tagging velocimetry of nitric oxide at 100??kHz using an injection-seeded burst-mode OPO

Burst-mode velocimetry of hypersonic flow by nitric oxide ionization induced flow tagging and imaging

Selective visualization of nitric oxide in living cells and tissue slices using a mitochondria-targetable fluorescent probe

Real-time monitoring of intracellular nitric oxide using a long-wavelength-emitting probe via one-photon or two-photon excitation

Ratiometric fluorescent biosensor for detection and real-time imaging of nitric oxide in mitochondria of living cells

An activatable near-infrared fluorescent probe for tracking nitroxyl in vitro and in vivo

Fluorescence Lifetime Hong-Ou-Mandel Sensing

Development of N2O-MTV for low-speed flow and in-situ deployment to an integral effect test facility

Visualizing Nitric Oxide in Mitochondria and Lysosomes of Living Cells with N-Nitrosation of BODIPY-based Fluorescent Probes.

A fluorescent probe with ultra-rapid response to nitric oxide

Bioinspired Design of Reversible Fluorescent Probes for Tracking Nitric Oxide Dynamics in Live Cells

Organic NIR-II molecule with long blood half-life for in vivo dynamic vascular imaging

Imaging intracellular viscosity by a new molecular rotor suitable for phasor analysis of fluorescence lifetime

Tracing nitroxyl in vivo with a high fluorescence quantum yield and large Stokes shift near-infrared fluorescent probe

An easily available ratiometric AIE probe for nitroxyl visualization <i>in vitro</i> and <i>in vivo</i>

Multi-photon Excitation in Uncaging the Small Molecule Bioregulator Nitric Oxide

A Highly Sensitive Ratiometric Self-Assembled Micellar Nanoprobe for Nitroxyl and Its Application In Vivo.

Simultaneous Three-Dimensional Velocimetry and Thermometry in Gaseous Flows Using the Stereoscopic Vibrationally Excited Nitric Oxide Monitoring Technique.

Ratiometric afterglow luminescent nanoplatform enables reliable quantification and molecular imaging

Naphthylamine-based ratiometric fluorescence probe with a large Stokes shift for monitoring mitochondrial peroxynitrite