Abstract:One of the greatest challenges for using microbial fuel cells (MFCs) for wastewater treatment is creating a scalable architecture that provides large surface areas for oxygen reduction at the cathode and bacteria growth on the anode. We demonstrate here a scalable cathode concept by showing that a tubular ultrafiltration membrane with a conductive graphite coating and a nonprecious metal catalyst (CoTMPP) can be used to produce power in an MFC. Using a carbon paper anode (surface area Aan = 7 cm2, surface area per reactor volume Aan,s = 25 m2/m3), an MFC with two 3-cm tube cathodes (Acat = 27 cm2, Acat,s = 84 m2/m3) generated up to 8.8 W/m3 (403 mW/m2) using glucose [0.8 g/L in a 50 mM phosphate buffer solution (PBS)], which was only slightly less than that produced using a carbon paper cathode with a Pt catalyst (9.9 W/m3, 394 mW/m2; Acat= 7 cm2, Acat,s= 25 m2/m3). Coulombic efficiencies (CEs) with carbon paper anodes were 25-40% with tube cathodes (CoTMPP), compared to 7-19% with a carbon paper cathode. When a high-surface-area graphite brush anode was used (Aan = 2235 cm2, Aan,s = 7700 m2/m3) with two tube cathodes placed inside the reactor (Acat = 27 cm2, Acas, = 93 m2/m3), the MFC produced 17.7 W/m3 with a CE = 70-74% (200 mM PBS). Further increases in the surface area of the tube cathodes to 54 cm2 (120 m2/m3) increased the total power output (from 0.51 to 0.83 mW), but the increase in volume resulted in a constant volumetric power density (approximately 18 W/m3). These results demonstrate that an MFC design using tubular cathodes coated with nonprecious metal catalysts, and brush anodes, is a promising architecture that is intrinsically scalable for creating larger systems. Further increases in power output will be possible through the development of cathodes with lower internal resistances.

A comprehensive study on transparent conducting oxides in compact microbial fuel cells: Integrated spectroscopic and electrochemical analyses for monitoring biofilm growth

TiO2 Nanotube Arrays Modified Titanium: A Stable, Scalable, and Cost-Effective Bioanode for Microbial Fuel Cells

Influence of Soluble Microbial Products on the Long-Term Stability of Air Cathodes in Microbial Fuel Cells

Application of OPEFB Fibre Based Electrode in Microbial Fuel Cell System for Electricity Generation and Chlorophenol Degradation

Optimizing microbial fuel cells performance: An innovative approach integrating anode materials, dual-pollutant treatment, and long-term operation

Interaction of Bacteria and Archaea in a Microbial Fuel Cell with ITO Anode

To Study Microbial Fuel Cell with its Recent Developments

Bio-electrocatalyst Fe3O4/Fe@C derived from MOF as a high-performance bioanode in single-chamber microbial fuel cell

Harvesting Bioelectricity from Microbial Fuel Cells (MFCs) Powered by Electroactive Microbes

Titanium Dioxide Thin Film-Modified Stainless Steel Mesh for Enhanced Current-Generation in Microbial Fuel Cells

Modeling and experimental investigation of the effect of carbon source on the performance of tubular microbial fuel cell

Thermally Expanded Graphite Incorporated with PEDOT:PSS Based Anode for Microbial Fuel Cells with High Bioelectricity Production

Synchronously degradation of biogas slurry and triphenyltin chloride in microbial fuel cell

Design and Optimization of Critical-Raw-Material-Free Electrodes towards the Performance Enhancement of Microbial Fuel Cells

Microbial Fuel Cell: Recent Developments in Organic Substrate Use and Bacterial Electrode Interaction

In situ visualization of biofilm formation in a microchannel for a microfluidic microbial fuel cell anode

Optimization of microbial fuel cell process using a novel consortium for aromatic hydrocarbon bioremediation and bioelectricity generation

Modification of carbon based cathode electrode in a batch-type microbial fuel cells

Construction of integrated oxygen-rich carbon-based metal-free cathode to simultaneous boost wastewater treatment performance and energy recovery in bio-electro-Fenton system

Live diatoms as potential biocatalyst in a microbial fuel cell for harvesting continuous diafuel, carotenoids and bioelectricity

Tubular Membrane Cathodes for Scalable Power Generation in Microbial Fuel Cells.